Product information

Product information
PI 7/16/04/2015
LM 750 Compressor Oil SAE 40
Synthetic triester-based compressor oil. Tested and
approved by well-known compressor manufacturers.
Extremely high self-ignition temperature of 400 °C.
High oxidation stability and optimum lubrication.
- outstanding resistance to oxidation
- residue-free combustion
- optimum lubrication under all operating conditions
- for extended oil-change intervals
- good corrosion protection
- low tendency to foam
- low residue formation
Technical data
- After approx. 100 operating hours, clean or replace
the oil filter. With badly contaminated oil filters, check
the compressor oil for the total degree of contamination. If badly contaminated, change oil.
- The next oil change should be carried out in accordance with the extended oil change interval.
- Only refill with LM 750 Compressor Oil.
Viscosity SAE class
ISO viscosity class
VG 150
DIN 51519
Viscosity at 40 °C
145 mm²/s
DIN 51562
Available pack sizes
nicht bestimmt mm²/s
DIN 51562
5 l Canister plastic
Viscosity at 100 °C
10 l Canister plastic
Flash point
nicht bestimmt °C
DIN ISO 2592
195 l Drum sheet metal
Pour point
- 40 °C
DIN ISO 3016
Color / appearance
gelb / yellow
flüssig / liquid
Density at 20 °C
0,965 g/ml
All plastics coming in contact with the oil must be
checked for compatibility.
The operating instructions of the compressor manufacturer must be followed.
Our information is based on thorough research
and may be considered reliable, although not
legally binding.
Areas of application
For use in rotary and displacement compressors and
for lubricating cylinders and power trains. Also suitable for breathing apparatus used for diving. Specially developed for applications where mineral oils
do not deliver optimum machine performance. Follow manufacturer's instructions.
Instructions for oil changes
When using LM 750 Compressor Oil for the first time,
these points must be followed:
- Drain mineral oil fully when warm
- Clean or replace the oil filters and valves
- Refill with LM 750 Compressor Oil
Jerg-Wieland-Str. 4
89081 Ulm-Lehr
Postfach 2829
89018 Ulm
Phone: +49 (0)731/1420-13
Fax: +49 (0)731/1420-82
e-mail: [email protected]
Service-hotline: 0800/8323230
Technical hotline: +49 (0)731/1420-871