How we build reality Z+F LaserControl® 8.5 Z+F LaserControl® Automatic target registration Z+F LaserControl® provides all necessary tools to manage your scan jobs efﬁciently. It is a unique software solution with complete workﬂow from data capturing to delivery. Three different software packages are available for getting the ideal solution according to your needs. Targets can now be detected and labeled automatically. This includes standard paper targets as well as the Z+F Proﬁ Targets. Z+F LaserControl® 8.5 is able to use the naming convention of survey control points, if available. “Auto-Mapping” of panorama images Elements Z+F LaserControl® Elements allows you to view and browse your point cloud data without any cost. Besides checking the accuracy status of the device calibration, basic measurement functions are implemented. Furthermore it is the key to access and operate all Z+F products of the entire Z+F IMAGER® and Z+F PROFILER® family. Download your free version of Z+F LaserControl® Elements at www.zf-laser.com or contact your local Z+F partner. Sometimes, external camera imagery is captured from the same location as the scanner for panorama processing. Z+F LaserControl® 8.5 allows to automatically align and map the panorama onto the point cloud. There is no further need for manual alignment work, which requires selecting homologous points on the panorama and the scan (64-bit version only). Professional Z+F LaserControl® Professional is the standard solution for common use with every laserscanner of the Z+F IMAGER® and Z+F PROFILER® series. Filters allow differentiated pre-processing of scan data and are the key to a highly accurate registration. By adding colour information with the included colour module the scan data is ready for post-processing through a wide range of export formats. Naturally all Z+F LaserControl® Element features are included. In addition the kinematic function offers extended usability for proﬁling applications. Professional PLUS Z+F LaserControl® Professional PLUS offers extended functions for registration, additional data visualisation and project management tools. Both, Cloud-to-Cloud and Plane-to-Plane registration decrease the need of targets dramatically. Saving time in the ﬁeld and in the ofﬁce are the striking beneﬁts of these future orientated registration tools. Furthermore ﬂy throughs can be generated, simulated and saved. Your static imagery can be rectiﬁed and printed to scale. The relocation of misplaced data with the mirror ﬁlter is the adequate tool to process your point clouds to perfection. Finally the linktool offers you the best usability for project management. Contact Zoller + Fröhlich GmbH Simoniusstrasse 22 88239 Wangen im Allgäu Germany 3D PDF export Z+F LaserControl® 8.5 supports the export of point clouds and other objects into 3D PDF, which can be read with the free Adobe Reader! Installing software on the client’s system is not necessary any more because the Acrobat Reader is already installed on most systems. Phone: +49 (0) 7522 9308-0 Fax: +49 (0) 7522 9308-252 [email protected] www.zf-laser.com © 2014 Copyright Zoller + Fröhlich GmbH · Z+F UK Hardware Ltd. · Z+F USA, Inc. · Z+F Italy Srl Reproduction and copies only with written permission from the copyright holders. All rights reserved. Errors and changes reserved. How we build reality “Multi-Window-View” The new multi-window system allows you to analyze your data concurrently in various dimensions. Z+F LaserControl® 8.5 updates each view (3D View, BubbleView, Overview Mode) in real-time which allows easy examination of data in 2D and 3D at the same time. Especially together with the new measuring tools, the new multi-window system reveals its full potential. The user can easily select points in 2D, while the hovered point will simultaneously be shown in 3D. It reassures that the correct point is selected at all time. Z+F LaserControl® 8.5 Perpendicular measurements The perpendicular measurement tool allows you to quickly measure the distance from a point to a plane. This is extremely useful if you need to measure the width and height of rooms. “Snap to Height” The measured points can be projected onto a plane at a user-deﬁned height. It offers the possibility to rapidly compute area information directly from the point cloud. The tool can also be used to quickly outline the ﬂoor plan of a room and to determine its area. New measuring tools: Enhanced Orthophotos “Auto-snapping” to corners and edges in the point cloud The new auto-snap feature to corners and edges enhances your measuring workﬂow immensely. It allows you to pick corner points or points on edges quickly and easily in 2D, eliminating the time needed for positioning and zooming in 3D. This enables you to perform quick outlining of features with polylines, e.g. for elevations, sections and ground plans. The display of orthophotos was drastically improved, providing higher resolution through automatic mosaics and high-contrast intensities. “Overview Orthophoto” is a quick solution to create maps and ceiling plans, straight out of the overview mode. In addition, orthophotos can now also be exported as a VRML ﬁle, even in high resolution. Contact Zoller + Fröhlich GmbH Simoniusstrasse 22 88239 Wangen im Allgäu Germany Phone: +49 (0) 7522 9308-0 Fax: +49 (0) 7522 9308-252 [email protected] www.zf-laser.com © 2014 Copyright Zoller + Fröhlich GmbH · Z+F UK Hardware Ltd. · Z+F USA, Inc. · Z+F Italy Srl Reproduction and copies only with written permission from the copyright holders. All rights reserved. Errors and changes reserved. How we build reality Z+F LaserControl® 8.5 “Project to-go” “Overview Window” Take your project and viewer software with you on a regular ﬂash drive. This function copies your entire project to any drive together with a portable version of Z+F LaserControl® 8.5. Thus, no software installation is required for viewing the project. “Project to-go” offers enormous advantages for the project review process and the communication with customers and especially with corporate networks. The overview mode was enhanced to allow accurate positioning and scaling of background maps or satellite images and to adjust opacity. In addition, the overview mode now supports direct measurements. “Multi touch support” and Multi windows Further new features: Z+F LaserControl® 8.5 provides support for multitouch enabled devices, such as Windows tablets. The tablet version includes all functions of Z+F LaserControl® 8.5 and is designed to be used on-the go or in the ﬁeld. s s s s s s Contact Zoller + Fröhlich GmbH Simoniusstrasse 22 88239 Wangen im Allgäu Germany Enhanced system check with PDF report Performance improvements of Plane-to-Plane Registration Module Reading ZFC-format, support for Z+F IMAGER® 5006/5010 In 3D, the visibility of object groups can be toggled (points, labels, links, targets, etc.) Export panorama images of entire project Support for Space Mouse Phone: +49 (0) 7522 9308-0 Fax: +49 (0) 7522 9308-252 [email protected] www.zf-laser.com © 2014 Copyright Zoller + Fröhlich GmbH · Z+F UK Hardware Ltd. · Z+F USA, Inc. · Z+F Italy Srl Reproduction and copies only with written permission from the copyright holders. All rights reserved. Errors and changes reserved.
© Copyright 2019 ExploreDoc