Poppit Sanosil 123 Step card instructions

Start Up Procedures for Pools & Spas
Like most things in life – the better you start the easier things go. That is why we want you to follow these simple steps.
Should you have any doubts or concerns, please feel welcome to contact our team on 1800 648 959.
1
HEAT AND READ
(DETERMINING WHAT CHEMICALS NEED TO BE A
ADDED)
DDED
D
Preheat water in spa to at least 26 degrees then,
n, using th
n
the
he POPPIT
OPPIT SANO
SANOSIL
SIL
I test
tessstt strip
str p ((swirl
3 times and line up with colour indicators on test vial) check
and
c
nd record
rec d pH and
an alkalinity. It
is important to make the reading within 30 seconds for it to be accurate.
e.
2
BALANCE WATER
(ADJUSTING THE PH & TOTAL ALKALINITY WITH POPPIT ONE-STEP WATER PREP)
Based on the reading on the strip you can determine how much of the POPPIT ONE STEP
WATER PREP to add. See the chart below for how much to add. When adding Poppits OneStep Water Prep to spa water, pour it slowly into the spa with the jets turned on.
pH
Alkalinity
ADD
Per 1000lt
1500lt
3000lt
5000lt
LOW
0-20ppm
>
1000ml
1500ml
3000ml
5000ml
LOW
21-40ppm
>
650ml
975ml
1950ml
3250ml
6.5
41-60ppm
>
400ml
600ml
1200ml
2,000ml
Circulate water for 2 – 3 hours before moving to Step 3.
NOTE: Generally town water supply has some level of alkalinity whereas rain water (tank water)
has none. Check levels again next day (please note, the strips read pH slightly lower than actual
and so if reading for pH is at the lower end of the scale this is acceptable).
3
SANITISE YOUR SPA
(ADDING POPPIT SANOSIL POOL & SPA SANITISER)
For Spas up to 3000 litres add 300ml/1000 litres and circulate for 30 minutes. For Swim
Spas add 200ml/1000 litres and circulate for 60minutes.
Your spa is now ready to use
™
SENSITIVE
CHOICE
www.poolpoppits.com.au
SUPP OR T IN G
A S T H M A CA RE
Sanosil Test Strips
Immerse strip in water for 2
SECONDS.
Remove with pads face up.
DO NOT SHAKE OFF EXCESS
WATER.
Read immediately: Per > Alk > pH
• • Close cap tightly after removing
strip
• For best results read in natural
daylight
• Store in a cool, dry place.
Spa should be maintained
at 100ppm level of Poppit
Spa Sanitiser
Poppit Sanosil Test
Strips
DO NOT allow to drop
below 40ppm
If test is
showing
PPM
Add Poppit
Sanitiser
mL/1000L
100ppm
Nil check in 2 days
60ppm
80ml
40ppm
120ml
20ppm
160ml
10ppm
180ml
5ppm
190ml
0ppm
200ml
pH Ideal 7.2-7.8.
7 2-7 8
Total ALK Ideal 60150ppm
Poppits Sanosil Ideal
60-100ppm
Spa & Swim Spa Water Maintenance
Care for your Spa and for the environment!
It stands to reason that – the better we maintain the water, the longer the
drained and replaced.
save time, save money and save your sanity!
We recommend that your maintenance program include a simple routine
check on the key areas of water management.
1. Water Balance
Check at least once a week that the pH is 7-7.8; alkalinity 60 - 150. If you
"#$
remain constant for the life of the water in the spa.
2. Sanitiser Level
Weekly and before use ensure that the PER reading on the strip (Sanitiser) is 100ppm. If not adjust by adding
the recommended dose as per the Test Strip Vial label for the level you read. This will restore the level. Fitting
an auto doser will make this more convenient for you. Ask your local stockist.
3. Visual
%&
'%$
Poppit Quick Fix Oxidiser at the rate of 30 grams/1000 litres. You should only need to do this every 2 weeks.
*&
+$&<[email protected]
4. Phosphate & Algae Control
%
[email protected]@@@&[\
had exceptionally high use or a party) then it is likely that phosphate or algae (or both) have come into the
™
SENSITIVE
CHOICE
SUPP OR T IN G
A S T H M A CA RE
www.poolpoppits.com.au
Spa & Swim Spa Water Maintenance
spa. These are airborne and drop in on leaves or can be carried in on your feet and clothing etc. To remove
the phosphates and algae use 50ml/1000 litres of Poppit Pool & Spa Complete Maintenance and circulate
J^M'_$
will quickly reduce to normal.
You should only need to repeat this on a monthly basis.
5. Filter Cartridge Cleaning
%&
$
$'
%$\$$
the spa.
#$$$$&'<`@
<z
z'$
$&
time you pass for 2-4 hours. Rinse off and allow to dry before returning them to the spa.
"$$$'
%$$`@
+$&<=
+
&M^{'
|}~|$&
{[M=M
hours or 10 minutes every hour) Please note L.A. Filter Sox or Purezone Filters must not be cleaned in Poppit
Filter Cartridge Cleaner or detergent.
6. Spa Cover
Always take the cover off weekly when you are home (especially if the spa has not been
en
nu
used)
sed)
d so that you
d)
can wipe the underside down and let the cover dry in the sun. Once a month, put some Poppit
ppit Complete
Maintenance onto a damp cloth and wipe the underside of the cover (as if washing it), rinse off and let the
cover dry.
Your maintenance
nttena
n
a
program should never take more than 15-30 minutes each week
For further
information
and Troubleshooting visit our website www.poolpoppits.com.au
er in
nfo
nfo
Your spa is now ready to use
™
SENSITIVE
CHOICE
SUPP OR T IN G
A S T H M A CA RE
www.poolpoppits.com.au