Les commandes PDMS Manuelles - pdms training | pdms tutorial

COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
L’objectif de ce manuel, n’est pas de se substituer à la documentation de PDMS, mais de
l’enrichir de commandes manuelles qui sont le quotidien de l’utilisateur.
Un partage des connaissances entre les utilisateurs est toujours bénéfique. C’est pourquoi,
ce manuel est le vôtre, retournez nous vos idées vos remarques, d’utilisateurs de PDMS.
“A valued PDMS user is one who freely shares his knowledge to help others”
DESIGN
AFFICHAGE
Réglage
o REPRE DARC 1
o REPRE DARC DEF
o REPRE HOLES ON
o REPRE HOLES OFF
o REPRE PNODE COL YELLOW
o REPRE PNODE ON
o REPRES PNODE SIZE 6
o REPRES PROF ON CL OFF
o REPRES SNODE ON
o REFRESH
o PREC 4 DP
o Q REPRES
Couleur
o Q COL ACTive
o Q COL AIDS
o Q COL CE
o Q COL VIS
o Q COL 4 (Etc…)
o COL ACT BLUE
o COL CE VIOLET
o COL 39 YELLOW
o ENHANCE CE TRANSL 0
o ENHANCE CE TRANSL 60
o ENHANCE CE COL YELLOW
o
o Q DRAW
(In general CE mean current element).
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Set arc tolerance to 1 degree
Set arc tolerance by default (10°)
Set hole on
Set hole off
Set pnod colour Yellow
Set pnod on
Set pnod size 6
Set profile representation SOLID and Cline off
Set snod on / off
Refresh the graphic window
Give Precision decimal to 4 digits
Give the representation status
Give the active current colour
Give the actual colour of aids
Give the active colour of CE
Give the visible colour
Give the Attributed colour (YELLOW)
Change active colour to BLUE
Change CE colour to VIOLET
Change colour 39 to YELLOW
Display CE SOLID
Display CE TO 60% TRANSLUCENCY
Display CE YELLOW
List the Drawlist display in graphic window.
(Take care! could be long if large drawlist)
Page 1 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
ADD to Drawlist
o ADD ALL WITHIN VOL CE
o
o
o
o
o
o
o
o
o
o
Add all elements include and crossing the CE
volume box
ADD ALL WITHIN VOL CE 100 Add all disciplines that overlap CE with an
additional clearance volume +1OOmm
ADD ALL SCTN WITHIN VOL CE Add only the SCTN include and crossing the CE
volume
ADD ALL STRU WITH PURP EQ 'PS' Add only SCTN with their Purpose EQ to ’ PS’
ADD ALL WITHIN VOL CE 500 COL 4 Add ALL within vol CE + 500 colour yellow
ADD CE Can be followed by AUTO CE to zoom adjusted around CE
ADD CREF
Add branch connected to cref
ADD CE COL 39
Add CE colour 39
ADD SITE
ADD site (be careful this can take time to load)
ADD CE Colour Blue TRANSL 75 Add CE colour blue with 75% of transparency
ADD HREF TREF ……CREF
Add connected branch to href tref or also cref with
nozzle or TEE
REMOVE
o
o
o
o
o
o
REM CE
REM ALL
REM PIPE
REM EQUI
REM ALL WITHIN VOL CE 100
ETC……….
Remove Current element
Remove all element
Remove pipe only
Remove equi only
Rem all include in CE volume box
MARK
o
o
o
o
o
o
o
o
o
o
AXE
o
o
o
MARK CE
Mark CE name
UNMARK CE or ALL
Unmark CE name can be used with ALL
MARk CE
Mark CE name
MARk With 'TEMPORARY' CE Tag CE with temporary name ‘TEMPORARY’
MARk With (NAME OF CATREF) CE Tag CE with the name of Catref
MARK With (GTYPE) CE
MARK With 'TITI' CE
MARK With (STRING(DESP1) + '_' + NAME OF CATREF) CE
MARK With (STRING(DESP1)) CE
MARK With (STRING(LOHE)) CE Tag PANEL CE with its thickness
AXES CE
AXE AT [email protected]
AXE OFF
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Add an Aid axe on current element
Add an Aid axe on element to be digit
Suppress the display
Page 2 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
AIDS
o
o
o
o
o
o
o
o
o
AID TEXT (NAME OF CATREF) AT AT P1
AID TEXT (STRing(DESP1) + '_' + NAME OF CATREF) AT AT P1
AID TEXT (STRing(MATREF) + '_' + STRing (LOHE) + '_' + NAME OF SPREF) AT AT P1
AID TEXT (STRing(MATREF) + '_' + STRing (TCTL) + '_' + NAME OF CATREF) AT AT PPLI TOS
AID TEXT ('MAT:' + STRing (MATREF)) AT AT PPLI LTOS AID TEXT ( 'LONG:' + STRing (TCTL)) AT
AT PPLI NA AID TEXT ('TYPE:' +NAME OF CATREF) AT AT
PPLI RBOS
o AID TEXT ('THK:' + STRing (LOHE)) AT AT P1 AID TEXT ( 'TYPE:' + STRing (SPREF)) AT AT P2 AID
TEXT ('MAT:' + STRing (MATREF)) AT AT P3
o AID TEXT ('TYPE:' + SUBSTRING(NAME OF CATREF,14)) AT AT P2 AID TEXT ('ELEVATION:' +
STRing (P100 UP IN WORLD)) AT AT P3
These commands has been defined with two (AT AT ) values. Don’t ask me why! ?? This is only I have
founded to get the right result.
o
o AID ARROW AT AT P1 OF CE DIR OPPO PPOINT1 HEI1000
o
o AID ARROW AT AT P100 OF CE DIR AXES PPOINT100 HEI1000
o AID CLEAR ALL
ALPHA REQUEST CLEAR
MODIF on DESPARAMS
o DESP n2 500 n6 300
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
To suppress all aid display.
Clear the command line window and its display.
This change the design parameters number 2 and
number 6 with its new value
Page 3 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
CREATION d’OBJET PDMS
o
o
o
o
o
o
o
o
o
NEW SUBS /name_of_subs AT [email protected] ORI Y IS N AND Z IS UP
NEW BOX XLEN 500 YLEN 25 ZLEN 50 LEV 5 7 OBST 0
NEW SUBS /name_of_subs COPY PREV BY East 1550
NEW SUBS /name_of_subs POLAR N22.5W Dist 500
NEW BOX XLEN 500 YLEN 10 ZLEN 250
NEW PIPE /flow/area/pipe1
NEW BRAN /flow/nom/pipe1/branch1
NEW ELBOW SELect WIth STYP EL
NEW FLAN COPY PREV FLAN
Associate with COPY
o COPY PREV MOVE North(43.68 + 180 Add)East DISTance (1243.8 2 Down)
(43.68+180) = notation polonaise inverse (43.68 180 ADD)
o NEW SCTN COPY PREV BY E200
o NEW SCTN COPY PREV BY E200 COL 4
o NEW SCTN COPY PREV BY E200 WRT CE
- Copy E200 wrt CE
o NEW SCTN COPY PREV MIRRO PLANE E THR E 1180 N8000 U2600
WRT/*(PDMS)
- Mirror copy CE with
coordinates and direction
o NEW STRU COPY PREV MOVE W WRT CE TO [email protected]
- Copy a new
STRU and move it west with respect CE and
toward Selected PLINE
COPY of GROUP d’objets
o COPY MEMber OF /Goup_member_name
o NEW xxx /nom COPY PREV
o NEW BOX COPY PREV BOX BY W1250
o NEW SUBS /nom_de_la_subs COPY PREV ROTate ABOUT Z BY 45
o NEW BRAN /CVT/RRI001 COPY /RRI001 RENAME /RRI /CVT/RRI
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 4 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
Move Objects
o
MOVE N45E DIST 1500
o
MOVE S DIST 1245
o
MOVE U THROugh P2 OF PREV BOX
o
MOVE ALONG P1 DIST 547
o
MOVE N45W TOWARDS [email protected] DIST 500
o
MOVE N45W TOWARDS [email protected] DIST 500
o
MOVE $_DIR WRT WORLD PLANE $_PLAN CLEARANCE $_DIST
$_RELATIVE $_CD.NNAME_NAME
o
MOVE ALONG $!SCTNDIR1 PLANE U THR U $_ELEVATION
o
MOVE P2 North DIST 500 FROM [email protected]
o
MOVE P2 North CLERANCE 100 THRough [email protected] MOVe E WRT CE TO [email protected]
Move CE wrt its own axe’s East to an
element chosen.
o
MOVE U TO [email protected](PDMS)
Move UP TO A Selected ELEMENT
Move WEST TO A Selected PLINE
o
MOVE W TO [email protected](PDMS)
o
BY D 1OO
Move CE DOWN 100 mm
o
BY E 100
Move CE EAST 100 mm
o
BY E 2IN WRT CE
Move CE E 2"(INCHES) WRT CE
(Determinate... correct CE axis first )
o
BY E3.lDIN
Move CE E3.1/2"(INCHES)
o
BY N lOO
Move CE NORTH 100 mm
o
BY U lOO
Move CE UP 100 mm
o
BY X lOO
Move CE X (EAST) 100 mm
o
BY X lOO WRT/*
Move CE X @AS") 100 mm wrt world
o
AT [email protected]
Move CE to selected PPOINT
o
AT [email protected]
Move CE to selected PLINE
It’s possible to define a common variable for any specific usage.
( Var !sctndir deriv ori of [email protected] ou var !plan cons plan u wrt /* thr [email protected] )
(Query with Q var !sctndir …..)
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 5 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
ROTATE command (Object Rotation)
Remarques à la commande rotate:
Effectuer la rotation d’un objet “n” autour de l’axe “Z” spécifié d’un objet, et devant tourner
jusqu’a la rencontre de l’axe “Y” d’un autre objet.
Pour exécuter cette commande, Spécifier l’axe de rotation, l’axe de l’objet que vous voulez
modifier et ensuite la position vers l’intersection de l’objet sur lequel vous voulez vous
aligner.
o
ROTATE ABOUT <axis> AND <axis> is TOWARDS <position>
ROTATE ABOUT X AND Y IS TOWARDS PREV
ROTATE ABOUT Z THROU [email protected] BY 45 Rotation d’un angle x autour d’un
ppoint
o
ROTate BY -45
o
ROTate BY 60 ABOUT East
o
ROTate THRough P3 ABOUT South BY 45
o
ROTate AND Y IS N45W25D
o
ROT THR WloooO N20000 U3000 WRT /* ABOut U BY 90
Rotate CE about coordinate wrt world about vertical axis by 90 degrees
o
ROT THR POSE ABOut D BY 30
Rotate about posend axis down
by 30
o
ROT THR POSS ABOu D BY 45
Rotate about start axis d by 45
o
ROT THR MIDPABO D BY 90
Rotate CE about middle sctn by 90
o
ROT ABO [email protected] BY 90
Rotate CE local to ppoint by 90.
o
ROT ABO [email protected] BY 90
Rotate CE local to pline by 90. .
o
ROT THR [email protected] BY 90
Rotate CE about any ppoint by 90.
o
ROT THR [email protected] BY 90
Rotate CE about any pline by 90.
o
ROT ABOut P1 BY 90
Rotate CE about P1 by 90.
o
ROT ABOut PPLIN TOS BY 15
Rotate CE about pline with pkey
equal TOS by 15 degrees
o
o
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 6 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
the datum-line
o
o
o
o
o
o
o
o
Displacement of object according to the normal in
PLANE N CLEAR 100 BEHIND CE
Move Plane North clearance 100 behind CE
PLANE E THROugh PIN 1
Move Plane East through Pin 1
PLANE U DIST 0 BEHIND [email protected]
Move Plane Up distance 0 behind ppoint @.
PLANE PIN 2 THRO [email protected]
Move pin2 through ppoint @
PLAN N DIST 500
Move to North distance 500
PLAN N THROugh [email protected]
Move North through element @
PLAN U THROUgh U 1000
Move Up through up dist 1000
PLAN N DIST –200 FROM [email protected] The distance is coming from south (-… equal
opposite direction)
POSITION Command ( Object position) )
o
o
o
o
o
o
o
o
POS PT DIST 500 FROM LAST MEM
POS PH DIST 500 FROM FIRST MEM
VAR !P1 P1 POS IN WORLD
POS AT [email protected]
POS [email protected] AT PIN 2
POS P6 AT P2 OF $v1
o
o
o
o
o
o
o
Q POS IN $v1
Q POS PIN1 WRT/*
Q POSE
Q POS FITT
Q POS [email protected]
Q POS PPLI BOS WRT/*
Q POS PPLI NA PROP 0.5
Q POS WRT TO [email protected]
o Q POSS
o Q POSS POSE
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Pos branch tail 500 from last member
Pos branch head 500 from first member
Store P1 pos in variable $!P1
Position at Ppoint chosen.
Position object chosen at Pin2
Position object from its P6 to P2 of chosen
Give the distance from CE to start of indented
member
Give the CE distance to $V1 variable
Give the CE coordinates OF PINl
Give the CE END coordinates
Give the CE FITT coordinates start
Give the CE PLINE coordinates CE start
Give the BOS PLINE coordinates
Give the centre coordinate position of the pline(PPLI)
at (0.5 x derive length) on the N/A
Give the start coordinates
Give the start and end coordinates
Page 7 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
o
o
o
o
o
o
o
o
o
Q POS WRT CE TO [email protected]
Q POS IN $V1
Q POS PIN1 WRT/*
Q POS End
Q POS FITT
Q POS [email protected]
Q POS PPLI BOS WRT/*
Q POS PPLI NA PROP 0.5
o Q POSS
o Q POSS POSE
Query the distance from CE to identify object
Query the distance from CE to $V1 object
Query the position of pin1 wrt world
Query the position end of sctn
Query the fitting coordinates (start)
Query the Pline coordinates at start of idpline
Query the bottom BOS pline coordinates
Query the neutral axis NA middle of pline
coordinates (position of the pline at (PPLI) at
(0.5 x DER LEN) on the NA
Query position start of the SCTN
Query position start and end of the SCTN
PINS
Utilisation des pins.
o PIN1 AT PPLI BOS PROP 0.5 POS
PIN1 at middle of pline BOS
o PIN1 PLAN N THR PIN2
Move the Pin1 through Pin2 with a normal to
plan north
Create pin1 according Ppoint choosen
o PIN1 COPY [email protected]
o PIN1 COPY PIN2
Create Pin2 by copy of Pin1
o PIN1 DIR D
Orient PIN1 down
o PIN1 DIR U WRT/* THR [email protected] Move PIN1 UP TO A SELECTED PPOJNT
o PIN2 DIR D WRT/* THR [email protected] Move PIN2 Down to a selected pline
Move PIN1 Down 8mm
o PIN1 BY D 8
o PIN6 OFF
Turn PIN6 OFF
o POS PIN3 AT CE
Position PIN3 at axis of CE
o Q DIR PIN1
Query Pin1 direction
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 8 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
Query PIPING.
o
o
o
o
o
o
o
Q BORE
Q POD1
Q CLLE
Q HPOS
Q HT
Q ISPEC
Q PA
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Q PA TOP WRT/*
Q PA BOP WRT/*
Q PH BORE
Q PH OD
Q PI WRT/*
Q PL WRT/*
Q PT OD
Q TPOS
Q CREF
Q PT
Q ITLE
CONN TO PREV
CONN TO NEXT
FCONN TO PREV
Q MTOT
Q MTOC
Q TULE
Q MTLE
Q MTLL
Q NCOF
Q NSRF
Q NVOL
Q NWEI
Q SPRE
Q GCOF
Q GWEI
Q MASS
o
o
Q VOL CE
Q WVOL
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Give the pipe bore
Give the Outside diameter 1
Give the branch lenght
Give the CE pipe HEAD coord
Give the CE hanger TAIL coord
Give the CE (PIPE) insulation
Give the CE ARRIVE coordinates with
Respect World
Give the CE ARRIVE coord at T0P of pipe
Give the CE arrive coord at BOP of pipe
Give the CE pipe head bore
Give the CE pipe head external diameter
Give the CE (PIPE SUPPT) location
Give the CE LEAVE coordinates
Give the Pipe tail Outside Diameter
Give the pipe tail coordinates
Give the connection reference
Give the pipe tail attributes
Give the length of the implied tube
Connect the CE to previous element
Connect the CE to next element
Force connection with incompatibles COCO
Give the MTO Status for the tubing
Give the MTO status for component
Give the Branch tube length
Give Length of material tube
Give CL. Length of material tube
Give the CE net COG
Give the CE net surface
Give the CE net volume
Give the net weight
Give the CE specification reference
Give the CE gross Centre OF Gravity
Give the CE gross weight
Give the centre of gravity and surface and
volume
Give the Volume box in coordinate ENU
Give the Volume box in coordinate ENU
Page 9 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Q BANG
Q DRNE
Q JUSL
Q DTYPE
Q JLnV
Q DRNS
EXTEND TO [email protected]
EXTEND TO [email protected]
EXTEND TO [email protected]
Give the beta angle of the SCTN
Give the end cut plane direction
Give the justification line
Give the FRMW style type (ie STLS)
Give the CE JOINT LINE
Give the start cut plane direction
Extend the sctn end to a selected item
Extend the sctn end to a selected Ppoint
Extend the sctn end to a selected Pline
NEW PANEL COPY PREV MOV TOWard [email protected] DIST 100 COPY THE
PANEL FROM ITS POSITION TOWARD ELEMT
DISTANCE 100
Q [email protected]
give the Pline information using cursor
CALLSTL GSCTNTAG CE
mark CE sctn START &END
DRNS PERP
Cut the SCTN end AT 9ODEG to section
Q CUTLE
Give the CE CUT LENGTH
Q HEI
Give the CE (PLOO LVL) PLT THK
Q FRAD
Give the PLOO/PAVE RADIUS ie 100mm OR
the NXTR/VERT radius ie 1OOmm
Q SJUS
Give the PLOO justification ie UTOP
Q NCOF
Give the CE net COG
Q NSRF
Give the CE net surface
Q NVOL
Give the CE net volume
Q NWEI
Give the CE NET weight
Q PLNA
Give the CE PLINE NAMES
Q SPRE
Give the CE specification reference
Q GRADE
Give the CE MATERIAL GRADE
Q GTYP
Give the GENERIC TYPE ie OD,HP,TG
Q GCOF
Give the CE gross Centre OF Gravity
Q GWEI
Give the CE gross weight
Q MATREF
Give the CE MATERIAL REP
Q DER LEN
Give the CE exact length
Q TCTL OR (Q CUTL)
Give the TRUE cut length
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 10 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
EQUIPEMENT
Object Connection
o
CONN [email protected] to [email protected]
o
CONN P2 to P3 OF PREV BOX
o
Q GCOF
o
Q GWEI
Connection from idp to idp
Connection of P2 to P3 of previous box
Give the gross centre of gravity
Give the gross weight
PDMS TYPICAL COMMANDS
ATTRIBUT GENERAL
o
AID CLEAR LINE ALL
o
AXES AT CE
o
AXES AT PA CE
o
AXES AT PPLI TOS PROP 1
o
AXES OFF
o
CHECK CE
FINISH
o
o
FLIP CE
o
GETWORK
INCLUDE
o
o
o
o
o
o
o
o
o
o
o
o
Remove all aid lines
Place axe at CE
Place axe at CE ppoint Parrive
Place axe at the end of TOS pline
Remove axe
Query the consistency of the ce
End & savework Pdms session
Turn 180 degrees the component itself
Get latest model from other users
(To use that command you MUST be on the right getting hierarchy)
INCLude CIRC 1 OF NOTE /TABLE
Transfer with item full name
INCLude [email protected]
Select the item to be transferred
INCLude NAME
Include with by its name, you could use$V1
LOCK ALL
Lock the CE & CE members
NAME /TEMPORARY
Rename CE TEMPORARY
NEW FITT COPY PREV BY ZDIST PROP 1 BANG 180
Copy the fitting at
the end of sctn and turn it 180°
o PROP 0 = START POSITION
o PROP 0.5 = MIDDLE POSITION
o PROP 1 = END POSITION
RENAME ALL /xxx/XXX /xxx/YYY Rename all from /xxx/XXX to /yyy/YYY
SAVEWORK
SAVE LATEST WORK
UNCLAIM ALL
Unlock all claimed memebers
UNLOCK ALL
Unlock CE & CE members
FINISH
Savework and Exit
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 11 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
QUERY et la mise à jour des Attributs
o
Q ALL BOX WITH (ATTRIB EAST GT 200 )
o
Q (FROM [email protected] TOWARD /EQUI2)
o
Q (FROM CE TO /EQUI2)
Query element with Attrib East
greater than 200
Query direction of element to be
[email protected] to /EQUI2.
Query /EQUI2 direction from CE.
Query on all pipe wholly include in the volume box of /Zone with an additional overall
clearance volume of 1500mm.
o
Q ALL PIPE EXCLUSIVE WITHIN VOLUME /CV1/BASA 1500
Query with wildcard keyword MATCHWILD. This functionality Give the possibility to
only tape a part of the word search.
o
Q ALL PIPE WITH ( MATCHWILD ( NAME, ’/name_of_pipe_or_branch*’))
Example with MATCHWILD :
• * Characters joker replaces a chain of characters.
• ? Characters joker replace only 1 character.(but can be use more
than one time)
i.e.: RR? 001*
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
•
Search results
:
RRX001P0
RRA001EC
Page 12 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
The first Query command you should know is Q ATT to query all attributes of a component.
o
Q ATT
Give the whole attributes of a component
o
Q DISPLAY
Give the tolerance and repre levels
o
Q DNST
Give the density
o
Q East
Give the CE East coordinates
o
Q ELEM
Give the CE element name
o
Q IDP @ WRT/*
Give the CE P POINT CO-ORDINATES
o
Q ITLE
Give the LENGTH of implied tube
o
Q LASMOD
Give the lastest date of modification
o
Q LEV
Give the CE level
o
Q LIST
Give the list of possible type in that hierarchy
o
Q LOCK
Give the lock status (true or false)
o
Q MCOUNT
Give the number of members
o
Q MCOUNT SCTN
Give the numbers of members type SCTN
o
Q MDB
Give the project MDB
Give the CE members
o
Q MEM
o
Q MIDP
Give the CE MIDPOINT coordinates
o
Q NAM
Give the CE name
o
Q OBS
Give the CE obstruction level ( 0 1 2 )
o
Q OLIST
Give the possible types of owner for CE
Q OWN
Give the CE owner
o
o
Q PARA
Give the CE parameters ie SERIAL SIZES
o
Q POS
Give the CE coordinates (START)
o
Q PRLS
Give the DESParam (PROPerties) LIST
o
Q PPLS
Give the Ppoint list
Q TYPE
Give the CE type ie. SCTN, PANE
o
o
Q HARDTYP
Give the hard type coding for CE
o
Q SOFTTYP
Give the softype of the CE
o
Q USER
Give the name of the current user
o
Q USERMOD
Give the last user modify
o
Q ZDIST
Give the fitting pos along sctn
o
o
o
o
$R6
$R
$HR
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Give the macro listing for the current macro
Exit the previous command $R6
History of possible commands
Page 13 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
DRAFT
SORT DIM
Sort the dimensions in order to use
NEW GLAB COPY PREV DDNAME [email protected]
NEW GLAB COPY [email protected] DDNAME [email protected]
NEW SLAB COPY PREV DDNAME [email protected]
NEW SLAB COPY [email protected] DDNAME [email protected]
NEW LDIM COPY ID LDIM @
NEW DPPT DDNAME [email protected]
New glab copy previous glab and choice the
new design element.
Atext.
o Atext '#OWNER(C13:13)'
o Atext ' - -PLAN VIEW AT EL.#POSU+ T.O.S.'
VUE EN PLAN SANS RENVOI DE PLAN ET AVEC L'
ELEVATION INTELLIGENTE
(SUR UNE SECTION)
o Atext ' - -PLAN VIEW AT EL.#P3POSU+ T.O.P.'
VUE EN PLAN SANS RENVOI DE PLAN ET AVEC L'
ELEVATION INTELLIGENTE
(SUR LE PAVE D'
UN PANEL)
o Atext ' - -ELEVATION VIEW ROW #OWNER(C13:13)'
ELEVATION VIEW SANS RENVOI DE PLAN ET AVEC LA FILE INTELLIGENTE
o NEW TEXP COPY PREV BY Y10
COPY TEXT CE Y 10
o Atext ' -071-#pose(c3:8) EAST ELEVATION - #FRMW(C2:)'
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 14 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
Btext. (example of solutions to get the text values)
o Btext '* BRACINGS ARE #SPREF(P/3:)(C2:3)"x0#SPREF(P/3:)(C9:12) - CL
EL.#POSU+'
NOTE POUR LES CONTREVENTEMENTS HORIZONTAUX AVEC ELEVATION
INTELLIGENTE
o Btext '#SPREF(P/1:)(C2:4) #SPREF(P/2:)(C2:)'
DENOMINATION COMPLETE DES JIS
o Btext '#SPREF(P/1:)(C2:4) #SPREF(P/2:)(C2:9)'
DENOMINATION NOMINALE DES JIS
o Btext '#SPREF(P/3:)(C2:2)"x0#SPREF(Px2:)(C2:)'
SECTION DES TUBES INFERIEUR A 10" AVEC EPAISSEUR INFERIEURE A 1.000"
o Btext '#SPREF(P/3:)(C2:2)"x#SPREF(Px2:)(C2:)'
SECTION DES TUBES INFERIEUR A 10" AVEC EPAISSEUR SUPERIEURE A 1.000"
o BTEXT '#SPREF(P/3:)(C2:3)"x0#SPREF(Px2:)(C2:)'
SECTION DES TUBES AVEC EPAISSEUR INFERIEURE A 1.000"
o BTEXT '#SPREF(P/3:)(C2:3)"x#SPREF(Px2:)(C2:)'
SECTION DES TUBES AVEC EPAISSEUR SUPERIEURE A 1.000"
o BTEXT '#SPREF(P/3:)(C2:3)"'
SECTION DES TUBES SANS EPAISSEUR
o Btext 'PG #DESP[1]x#DESP[2]x#DESP[3]x#DESP[4]'
DENOMINATION COMPLETE DES PG
o Btext 'PG #DESP[1]x#DESP[2]'
DENOMINATION NOMINALE DES PG
o BTEXT '#EQUI(P/4:)(C4:)'
REPERAGE DES EQUIPEMENTS
o BTEXT 'ELLIPTICAL #SPREF(P-4:)(C2:)S #DESP(P 2:)(C2:3) THK PL.'
DENOMINATION DES COQUILLES ELLIPITIQUES
o BTEXT '#SPREF(P-4:)(C2:)S #DESP(P 2:)(C2:3) THK PL.'
DENOMINATION DES COQUILLES RONDES
o Btext 'CONC. REDUC. #DESP[1]x#DESP[2]x#DESP[3] THK.'
DENOMINATION DES REDUCTIONS CONCENTRIQUES
o Btext '#SPREF(P5:)(C2:5) ~D#DESPARA[1] x ~D#DESPARA[2] #/x
#DESPARA[3]Thk. ROLLED PLATE'
DENOMINATION DES CONES
o Btext 'TOP OF BRACINGS EL.#PKGG^POSEU+<WRT /*>'
INDICATION DE L'
ELEVATION TOP D'
UN TUBE (JUSTIFIE EN NA) SUR LA PLINE
SUPERIEURE
o Btext 'PLATE #LOHE THK'
INDICATION DE L'
EPAISSEUR D'
UNE TOLE.
o BTEXT '8518J-0#NAME(C20:22)DW-3642#NAME(C25:28)'
name parts
o
o
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
compose with
Page 15 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
o
get the HREF from the component itself
o BTEXT |#BRAN<FR OWNER HREF OWNER>(C2:)|
o BTEXT |#HVAC< FR OWNER HREF OWNER>(C2:)|
Pltext.
o Pltxt 'EL. #POSu+ T.O.S.'
INDICATION DE L'
ELEVATION SUR LIGNE DE RAPPEL D'
UNE COTE
Pltxt 'T.O.G. EL. #P3POSu+#/%U[#P3POSu+ ]%U'
Dim text with 2 mesures (inches and m)
Pltxt 'T.O.S. EL. #POSu+#/%U[#POSu+ ]%U'
Pltxt 'T.O.S. EL. #POSEU+#/%U[#POSEU+ ]%U'
Pltxt 'T.O.S. EL. #DIMPOSU+'
Pltxt 'EL. #PKBOS^POSSU+ B.O.S. '
Various commands
FPT @
TPT @
PLCL @
GAP @
GAP DELETE @
GAP Delete ALL
Move the 1 point of primitive STRA
Move the last point of primitive STRA
Pclearance at @
Create gap on dim line
Choose the Gap to delete
Suppress all GAP
REPEAT 5 BY X0 Y610
Copy 5 times the current STRA by Y -10
How to get back the rule applied on an object in draft view.
RECUPERATION DE LA REGLE ET DU STYLE APPLIQUE SUR UN OBJET
o Q STYF <object type> ie :SBFI or BRAN
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
[email protected]
Page 16 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
DRAFT OUERY COMMANDS
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Q RRSF
Q SIZE
Q ADEG
Q APOF
Q BSRF
Q CHEIGHT
Q CPOF
Q DIR
Q DPOS
Q DTER
Q FPT
Q JUST
Q LEN
Q LHEI
Q LSHAPE
Q LVIS
Q MPT
Q PKEY
Q POS PLRF
Q RCOD
Q RRSF
Q SIZE
Q SNAP
Q THPOS
Q TMRF
Q TPEN
Q TPT
Q VLIMITS
Q VRAT
Q VSCALE
Q VTYP
Q XYPOS
Q XYPOS OF PTRF
Q DIR
Q DMTXT
Q DPOS
Q FPT
Q DTER
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
! "" # !
$ %&
' ( #! $#!
)%
&#
* +, '
) *# $ " - " ( # & " $ .$ ! /#
'
! 0"
0 *! "
" 1 " )2 & & 2
2"
) *# $ " - & '
# .$ ! /
)%
'
)" $ # * # ' ( .$ ! " $ # $ # ! 2
"
& 3 % ' ( " ( /" ' .&
"
! " & 0 $ ( .$ # " ) $ 4$ ' ! )%
5 !" 0 *
0" # 2"
" 1"
""
2
2"
&6
&'
# !"&" !
)
! 6
"
! " & 0 $ ( .$ # " ) $ 4$ ' !
' ( . # ! " & " ! * " )" 0 )
# " ! ) ) $ 4$ ' !
$
# "& " $ #
)
#"
! "" # !
$ %&
' ( #! $#!
! # & . ! " " # ! *$ # %$ 00 )%
( & " )2 # ) $ 4$ ' !
) *! ( 6 $ - # & (
" 1 . )$ $
& "" 6 " !
!" & "&
.$ # " ) $ 4$ ' !
( "!
! )&
& " $ * 7 " $ 89)%
! )&
* ,9 &"" 6 " !
.$ ! " $ # $ # " 2 ! 2
"
POSITION OF THE SYMBOL
C/VIEw DIRECTION(ie N )
DIM TEXT ATTRIBUTES
LDlM POSITION ON SHEET
CE FUNCTION
LAYER/LDIM TERM'TR DEFAULT
Page 17 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
o
o
o
o
o
o
o
Q RCOD
Q SNAP
Q THPOS
Q TMRF
Q TPT
Q VLIMITS
Q VSCALE
o
o
o
o
o
o
o
o
o
o
o
o
o
Q XYPOS
Q XYPOS OF TMRF
Q VTYP
Q BSRF
Q CHEI
Q MPT
Q PLTXT
Q POS PLRF
Q LSHAPE
Q OSRF
Q PKEY
RCODE RIGHT
Give the VIEW ORIENTATION
Give the SNAP SETTING (ON/OFP)
Give the C/VIEW MATCHLINES COORDINATES
Give the CE SYMBOL NAME
Give the STRA TAIKL POINT COORDINATES
Give the VIEW LIMITS
Give the C/VIEW SCALE(ie 0.5) 0.5 = 1:2 0.2 = 1:5
0.1 = 1:10
Give the POSITION ON SHEET
Give the Symbol position
Give the VIEW ATT(ie GLOBAL HIDDEN)
Give the ATTACHED DRG/SHT (DRWG LVL)
Give the TEXT CHARACTER HEIGHT
Give the STRA MIDPOINT COORDINATES
Give the PROJ TEXT ATTRIBUTES
Give the CURRENT VSEC CO-ORDS.
Give the LABEL LEADER LINE STATUS
Give the SHEET OVERLAY (VIEW ONLY)
Give the DIM PLINE STATUS (ie TCTF)
Rotate VIEW onto the right
COPY THE GLAB REFERENCED $V1
o NEW GLAB COPY $V1
o NEW GLAB COPY PREV AT @
COPY GLAB TO PICK LOCATION
DRAFT (interesting gobal commands)
o
o
o
o
o
o
DELETE NULL ANNOtation
DELETE NULL GLAB
DELETE NULL DIM
DELETE NULL SYMB
DELETE NULL $Q
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Supprime toutes les annotations bad ref
Supprime toutes les glab bad ref
Supprime toutes les dimensions bad ref
Supprime toutes les symboles bad ref
Interrogation des mots clés
Page 18 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
(How can use Collect and Evaluate command)(has been write in French for better
understanding by French people)
Méthodologie pour Utiliser des Commandes
COLLECT et EVALUATE
***OPERATEURS LOGIQUES*****
GT
LT
EQ
NEQ
LE
GE
AND
OR
NOT
+GRAND
+ PETIT
=
PAS =
+ PETIT OU =
+ GRAND OU =
A prendre comme lien entre deux questions qui doivent être vrais si cumulées.
À prendre comme lien entre deux questions pour extraire deux valeurs
Non égal à …
Exemple:
MATCHWILD(name,'/??A*') for ce
-- Vous recherchez la partie d'un nom d’une position et (10) nombre de caractères fixes (3)
SUBSTRING(NAME,10,3) for ce /COLLECTEUR-EA-100
Résultat = R-E
0 123456789 01234567890
-- Vous testez la partie 2 d'un nom fullname (objet pdms « non nommé » ) et cette partie est
un nombre réel à l’intérieur de la string fullname
Full name = SCTN 52 of SBFRAMEWORK 1 of FRMWORK /SF/CHARP-1/Z1/F1
52 est le terme 2 (65 dans l'
exemple pour partie 2 plus grande égale 65 )
REAL(PART(FULLNAME,2,' ')) GE 65 for ce
-- Vous cherchez la partie d'un nom (ABC) avec valeur vraie si trouvée
MATCH(NAME,'ABC') GT 1
vrai si trouvé dans le mot cherché
--
COMP(U) OF POS WRT WORLD
AFTER(NAME,'XXX')
choisis
Exemple : /MAVARIABLEXXXAMOI
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Retourne la valeur de la position Up
Donne la suite du nom après les caractères
= AMOI
Page 19 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
BEFORE(NAME,'WXC')
Donne les caractères précédent les caractères
choisis ( si pas trouvé le résultat est ' ')
Exemple : /MAVARIABLEWCXAMOI = /MAVARIABLE
AFTER(BEFORE(NAME,’xxx’),’/’)
Combiner les deux termes After et Before pour
obtenir le résultat souhaité
Exemple : /MAVARIABLExxxAMOI
= MAVARIABLE
PART(NAME,2,'/')
Retourne le champ 2 du nom après le 2eme /
PART('NAME-MICHEL','-')
Retourne NAME
PART('ABDCEFG',4)
Retourne C
REPLACE( NAME OF PSPEC,'/A150','TOTO' )
REPLACE((STRING(TEMP)),'-100000','100')
d’être en string sinon ne marche pas.
Substitue /A150 par TOTO
Subsitue le real temp à besoin
Récupération du diam en Inches
Bore Inch = (DIST (NOMBORE(false,p1bor),false,true,true,64,true))
Multiple avec choix des BEFORE AFTER
Name =
(before(after(namn of owner,'MDS-'),'s'))
Récupération de nombre avec un nombre de décimales définies
(string((nweight),'d2'))
Utilisation de COMPOSE
Pos EL. \ (STR (comp(U) of pos wrt /* , 'D1' ))
Test sur Nom de Site dont on retient le 6 caratere pour comparaison si valeur > 3
(REAL(subs(name of site,6,1))) GE 3
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 20 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
La fonction COLLECT
La fonction COLLECT (collecte d’éléments), associée avec ENHANCE (restaurer),
permet de rapidement sélectionner les éléments Design de la MDB courante, que l’on
souhaite isoler pour leur affichage, pour les mettre en évidence (couleur), les supprimer, etc
../.. .
Cette fonction demande de stocker dans une variable tableau les objets à travailler. Il est
donc nécessaire de connaître la commande PML de mise en variable VAR.
EXEMPLES D’UTILISATION DIRECTE
#---------------------------------------------------------------------VAR !charp collect all SUBS with ( matchwild ( NAME,’/M*’)) within N103750 E479075 U4950
TO N87500E494500U33500
Enhance all from !charp COLO 43.
#---------------------------------------------------------------------VAR !charp append collect all PIPE within N103750 E479075 U4950 TO
N87500E494500U33500
Enhance all PIPE from !charp COLO 35.
#---------------------------------------------------------------------EXEMPLE D’UTILISATION PAR MACRO
Exécuter le fichier script dans lequel ces lignes auront été écrites.
$d1=100
$* paramètre par défaut du choix du diamètre à prendre en compte.
$d2=22
$* paramètre par défaut de la couleur d’affichage.
Var !branch collect all bran with hbor eq $1
Enhance all from !branch colour $2.
Return
#---------------------------------------------------------------------Lancement du fichier en exécution.
$M /nom du fichierscript 150 35
#---------------------------------------------------------------------Autre exemple :
$d1=A33H
$d2=22
Var !collect collect all bran with dsco eq [$1]
Enhance all from !collect colour $2.
Return
#---------------------------------------------------------------------Lancement du fichier en exécution.
$M /nom du fichierscript A44BN 27 (A44BN et 27 sont les variables $1 et $2 du l’action)
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 21 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
EXEMPLE des OPERATEURS LOGIQUES avec la fonction COLLECT.
Question : Récupérer toutes les SUBS dont le nom de site est /LD03 et dont le nom contient
le caractère "V".
Var !voil collect all SUBS with ( NAME OF SITE EQ ’/LD03’) AND ( matchwild
( NAME,’/*V*’))
Enhance all from !voil colo 39.
Question : Récupérer toutes les boîtes dont l’échelle en x,y,z est supérieure à 1000.
Var !box collect all BOX with ( xlen GT 1000) AND ( ylen GT 1000) AND ( zlen GT 1000)
remove all BOX from !box
Question : Récupérer tout ce qui est compris dans le volume /CV1/BASA et dont le nom
commence par /CV1/RRI???
Add CE /CV1/BASA colo 2 $*.
ATTENTION pour l’utilisation du volume par le nom, le site doit être présent.
Var !rri collect all with ( matchwild ( NAME,’ /CV1/RRI/*’)) within vol ’/CV1/BASA’
Var !sec collect all with ( matchwild ( NAME,’ /CV1/SEC/*’)) within vol ’/CV1/BASA’
Enhance all from !RRI colo 8.
Enhance all from !SEC colo 16.
Question : Supprimer de l’affichage toutes les boîtes dont l’ATTRIBUT XLEN est plus grand
que 12350
Remove all box with ( XLEN GT 12350 ) from !box.
Question : Addition dans un groupe de pipes dont on veut enlever une branche.
Gadd all BRAN MEM FOR /PIPE2 EXCLUDE BRAN 1 OF /PIPE2
Opérateurs particuliers :
ARRAYWidth - Longueur de la chaîne de caractères contenus dans une variable.
!long = ARRAYWidth ( !collect )
$P $!long
Récupération du mot n dans le contenu d’une variable.
Var !local ’local 2 - local 3 - local 4’
Var !localnom (PART(VTEXT(!local),3))
$P $!localnom
Affiche le nom 3 (local 4)
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 22 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
La commande COLLECT (suite)
Collection de toutes les SUBS don’t le nom ne commence pas par /M
VAR!charp collect all subs with NOT (matchwild (name,’/M*’)) within N10375 E4790 U4950
TO N8750 E4945 U335
enhance all from !charp colo 43
#---------------------------------------------------------------------Collection avec addition dans la variable !Charp
var !charp append collect all pipe within N103750 E479075 U4950 TO
N87500 E494500 U33500
enhance all pipe from !charp colo 35
#---------------------------------------------------------------------Position relative d’un Nozzle en fonction de sa position Est et Nord
Query sqrt ( pow( comp(x) of pos wrt /* , 2 ) + pow ( comp(y) of pos wrt /* , 2 ))
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
Page 23 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.
COMMANDES PDMS MANUELLES
DESIGN
DRAFT
PARAGON
ISODRAFT
PARAGON
To only replace only one parameters ie: 100 23 FGD 12 56 without type the whole values
PARAm N3 ABC
and the result is 100 23 ABC 12 56
Set the values before loading an object with many DESP or DATA
Model set des para 1 23
Model set des para 2 100
Model set des para 3 ABC
Model set des para 4 10
Model setting DDRADIUS 75 DDHEIGHT 200
Macro to set by defaults the Catalogue parameters
We can write a script file and load it as a macro or datal.
$M ;;;;;;;;;;;;;;;;;;;;;;;;
Also to create component in PARAGON, we should take care about
Obstruction volume
Representation level
And use data with their default values set to a minimum
A data value can be ?????XXXXX!!!!!!!
Then by default any catalogue component will be defined with 3 or 4 levels of representation
CL centre line
Default geometrie
Obstruction geometrie
And detail geometrie
use.
AVEVA Southern Europe
10 cours Louis Lumière
94300 Vincennes
Téléphone 33+ 1 58 64 14 40
isometric view representation
Simple shape to facilitate the design motion.
Very simple and efficient to save time with clasher
Full geometry could be closed of real design but not for common
Page 24 sur 24
Merci à tous les utilisateurs qui ont contribué à la mise en œuvre de ce document.(Michel D)
Thank to all Pdms users which has contributed to made this document.