Neutron Sources Scuola Neutroni XII School of Neutron Scattering International School of Solid State Physics Erice, Sicily, 30 April-9 May 2014 John M. Carpenter Argonne National Laboratory and Oak Ridge National Laboratory 1 Neutrons and Neutron Sources The possibility of using the sca3ering of neutrons as a probe of materials developed a8er 1945 with the availability of copious quan??es of slow neutrons from reactors. Fermi and Zinn’s group at Argonne’s CP-‐3 reactor used Bragg sca3ering to measure nuclear cross-‐ sec?ons and develop diﬀrac?on methods. Wollan, Shull, and others worked in parallel at the Oak Ridge Graphite reactor. 98-6245 uc/vlb! 2 Neutron Science Facili1es Brugger plot 1020 JSNS SNS-II Thermal neutron flux, n/cm2 -sec 1018 HFIR 1016 1014 1012 IPNS KENS SINQ ZING-P' Tohoku e- linac ZING-P CP-2 CP-1 106 Berkeley 37-inch cyclotron 104 0.35 mCi Ra-Be source 102 100 1920 FRM-II Lujan NRU HFBR X-10 1010 108 SNS ISIS ILL MTR NRX CSNS SINQ-II ! ! LENS CARR OPAL CPHS Low-energy chargedparticle sources Fission reactors Pulsed spallation sources Steady spallation source Future (> 2010) sources Electron linac (pulsed) Trendlines Chadwick 1940 ESS 1960 1980 2000 2020 2040 Year 97-3924E uc/djr! 3 Spectral intensity, EI(E), n/sec/ster/lethargy 1012 SLOW 1010 10 8 10 6 COLD FAST 293-K Maxwellian VCN RESONANCE THERMAL SLOWING-DOWN 104 102 HOT FISSION, EVAPORATION INCIDENT PROTON ENERGY Fast and Slow Neutrons, Etc. CASCADE, HIGHENERGY EPITHERMAL UCN 100 10-7 10-5 10-3 10-1 101 103 Energy, eV 105 107 109 Nominally “Thermal” neutrons: Energy=25 meV, corresponds to the average energy in a Maxwellian distribution at 293 K temperature; Wavelength = 1.8 Å; speed = 2200 m/s. How Do We Produce Neutrons? Fission ! ! ! Chain reaction Continuous flow Net ~ 1 neutron/fission Spallation No chain reaction ! Accelerator driven ! Pulsed operation ! ~ 30 neutrons/proton ! 5 Low-‐Energy Charged-‐Par1cle Reac1ons Neutron yields vs. particle energy e-‐ Bremsstrahlung Photoneutron Yields Electron linacs. Heavy element targets are preferred. For W on the plateau, the energy deposited in the target per neutron produced is E / Y (E) ! 2800 MeV / neutron . Neutrons produced have an evaporation energy distribution. Evapora1on Neutron Spectrum The func?on shown in the ﬁgure has a mean energy of 1.98 MeV. A more accurate form is f(E) = exp(-‐1.036E)sinh √(2.29E), where E is expressed in MeV. This is, strictly speaking, the spectrum of neutrons produced by ﬁssion in 235U, but it applies approximately and in form to most other evapora?on neutron spectra. ! A. M. Weinberg and E. P. Wigner, The Physical Theory of Neutron Chain Reactors, The University of Chicago Press (1958). p 111-115. Where Do Neutrons Come From? Fission: n + 235U = 1.5n + n + fragments ~ 180 MeV/n (as heat) Sustain chain reaction Available Spallation: p + heavy nucleus = 20 ~ 30 n + fragments 1 GeV e.g., W, Pb, U ~ 30 MeV/n (as heat) Bremsstrahlung photoproduction: e- on heavy target —> photons photons on heavy nucleus —> giant resonance excited nucleus decay —> neutron ~ 3000 MeV/n (as heat) 98-6239 uc/vlb! 9 Where Do Neutrons Come From? Spalla?on yields measured in support of the ING project. Absolute global neutron yield (neutrons/proton) = 0.1(EGeV -‐ 0.12)(A+20), except ﬁssionable materials; = 50.(EGeV -‐ 0.12), for 238U. Measured Spalla?on Neutron Yield vs. Proton Energy for Various Targets, J. Frazer, et al. (1965). From Fraser et al., measurements at Brookhaven Cosmotron 2000-05264 uc/arb! 10 The 10,000,000,000-‐Volt Ques1on A summary observation is that the total neutron yield, proportional to the proton energy in the neighborhood of 1 GeV falls off at higher energies due to the loss of energy 0 from the hadron cascade through the very rapid ! decay (two 70-MeV photons escape). For energies above about 3.0 GeV, the yield of neutrons per proton varies as E0.80. In spite of this, it may be that to achieve given power or neutron production rate, higher energies are preferable to lower ones, because higher energy may be cheaper and easier to accomplish than higher current. Where Do Neutrons Come From? Low-‐energy (p,n) reac?ons, e.g., p + 9Be —> n + 2alpha + p and —> n + 9B. Most of the proton energy appears as heat, deposited in ~ 1. mm . Yield ~ 1300 MeV/n @ Ep = 13 MeV 3.5 x 10-3 n/p. 98-6240 uc/vlb! 12 Neutron Energy Distribu1on From Be(d,n) Beryllium is likely most a3rac?ve as a target for low-‐energy neutron facili?es because the yield is high and the material is easy to manage. LENS neutron spectra Targets are very thin for low-‐ energy charged-‐par?cle sources because par?cle ranges are small for the energies involved (~ 1 mm for 15 MeV protons in Be). LENS is the Low-‐Energy Neutron Source opera?ng at Indiana University. A comparable source, the China Pulsed Hadron Source (CPHS), is nearing comple?on at Tsinghua University, Beijing. Be (p,n) Neutron Yields Be(p,n) Thick Target Global Neutron Yields 15 10 14 10 Yield, n/milliC 1013 1012 11 10 10 10 109 1 10 100 Energy A simple function fits the Be(p,n) data reasonably well, dashed 2.05 line, Y E p = 3.42x 10 8 E p − 1.87 neutrons per millicoulomb. Energy Distribu1on of Neutrons from a Pulsed-‐Source Moderator The modified Westcott function describes most moderated source spectra quite well and is the sum of a Maxwellian form and a slowing-down function with a low-energy cutoff. 2 α E E EI(E) = I Th 2 exp ( –E/E T) + I epi( ) ∆(E) , E Re f ET ∆(E) = 1 / [1 – (E / E co) s] . 15 Time-‐of-‐Flight Wavelength Analysis Pulsed sources usually rely on the narrow source pulse to deﬁne the ?me origin of neutrons at the source. A “neutron ?me schedule” Illustrates. Neutrons of all wavelengths emerge from the source (moderator) at ?me zero. They travel a distance L at speed !"!#!$%&'! ( and arrive at the detector at ?me ! "!#!$%& . Thus, the wavelength is !! !"!#$%&'(%) . Moderated-‐Neutron-‐Emission Pulse Shape Neutrons emerge from the moderator as a func?on of ?me, which varies according to the energy (i.e., wavelength), the I-‐C func?on: 2 a" a f ( E,t ) = #(1! R ) ( at ) exp(!at) + 2$ 2 / 2 2 & ,1 # a 2! ) 1 +2R exp(" ! t) " exp("at) % 1+ ( a " ! ) t + ( a " ! ) t ( . 0 2 + 2 $ ' -1 (a " ! ) * 2 The ﬁrst term represents neutrons emerging in the process of slowing down from high energies. The second term is the “storage” term, which represents neutrons that have “thermalized” in the moderator, broadened by the slowing-‐down source ?me distribu?on. Parameters are smooth func?ons of the neutron energy. . Target Materials Target materials must withstand tough opera?ng condi?ons: Radia?on damage, High heat-‐ﬂux cooling, Corrosion, Chemical compa?bility, Safety. Of course, they must also have appropriate nuclear proper?es for neutron produc?on. Preferred coolants: H2O or D2O. Gallium has a3rac?ve quali?es as a coolant. Used in spalla?on targets: U, W, Ta, Hg, Pb, and Pb-‐Bi. • U is metallugically unstable, and, like W, corrodes in H2O, so needs cladding and may suﬀer disadvantage in LOCA condi?ons. • Ta resists corrosion but produces excessive radioac?ve a8er-‐ heat. • Hg, Pb, and Pb-‐Bi are convenient for heat removal in liquid form, but are chemically hazardous. 18 Short-‐Pulse vs. Long-‐Pulse Sources Most of the exis?ng pulsed neutron sources are as shown previously, producing fast neutrons in short (~ microsec) pulses of protons as extracted from the ring: short-‐pulse sources. Recent considera?ons take long (~ millisec) pulses from the linac and omit the ring: long-‐pulse sources. Short-‐pulse sources exploit the short pulse, broadened by the wavelength-‐dependent modera?on ?me, to deﬁne the star?ng ?me for ?me-‐of-‐ﬂight instruments. Most instruments at long-‐pulse sources require trimming pulses to meet resolu?on requirements. Types of Neutron Sources Reactors: HFR at ILL, HFIR at ORNL, ~1.5x1015 n/cm2/s FRM-2 at Munich: fluxes ~ 1.x1015 n/cm2/s Advantages • High time-averaged flux. • Mature technology (source; instruments–development continues). • Very good for cold neutrons. Drawbacks • Licensing (cost/politics of HEU). • No time structure. 98-6237 uc/rra! 20 Types of Neutron Sources Pulsed spallation sources: IPNS, ISIS, LANSCE, SNS, JSNS, ESS. ISIS—200 µA, 0.8 GeV, 160 kW , 2x1013 n/cm2/s average flux SNS— 1.4 mA, 1.0 GeV, 1.4 MW, 8x1015 n/cm2/s peak flux Advantages • High peak flux. • Advantageous time structure for many applications. • Accelerator based – politics simpler than reactors. • Technology rapidly evolving. Disadvantages • Low time-averaged flux. • Not all applications exploit time structure. • Rapidly evolving technology. • Thermoelastic shock. 98-6235 uc/rra! 21 Accelerator-‐Based Pulsed Neutron Source Moderator(s) close to the target slow down fast neutrons to energies useful for applica?ons. Types of Neutron Sources The High-Flux Reactor at Institut Laue-Langevin, Grenoble 2000-05269 uc/arb! 23 Source Spectra of the FRM-‐II Reactor neutron flux, n/cm2-sec wavelength, Å 98-6245 uc/vlb! 24 Moderators Because all mechanisms of neutron produc?on release fast neutrons, all slow-‐neutron sources have moderators to slow down fast neutrons from the source to lower energies of interest for applica?ons, from MeV —> meV. In reactors, the coolant serves as internal moderator; L-‐H2, L-‐D2, graphite, beryllium, or water are external moderators. In pulsed sources the most eﬀec?ve moderators are dense hydrogenous materials, L-‐H2, L-‐D2, H2O, D2O, L-‐CH4, S-‐CH4, (CH2)n … , which can be tailored (size, material, temperature, “poisoning”, “decoupling”) for diﬀerent purposes (cold, not-‐so-‐cold …) favoring either short modera?on ?mes or high intensity. Just For Historical Fun, MTA: The Materials Tes1ng Accelerator, ~1950 Cutaway View of the Linear Accelerator A. P. Armagnac, “The Most Fantastic Atom Smasher”, Popular Science Vol. 173: No. 5 Nov. 1958, p. 114. 2000-05268 uc/arb! 26 Pulsed vs. Steady Sources Pulsed sources relate naturally to accelerators that operate in pulsed mode. In this mode, pulsed sources have a duty-‐ cycle advantage, in that the source is “on” and at full power only part of the ?me and “oﬀ” most of the ?me, during which heat in the target and moderators is (slowly) removed. If the source is on for ?me !t source and pulses at frequency f , the peak power ifs related to the average power as P peak = P average f !t source . The same is true for the neutron ﬂux, for which the source is “on” for the dura?on of the moderated pulse, which depends on the wavelength. For example, for f = 50 Hz 3 !t = 20 µ s 1 f !t = 10 and ! "#$ , the duty-‐cycle factor is ! "#$ . Use of Pulsed vs. Steady Sources The ﬁgure illustrates the duty-‐cycle advantage. Because in pulsed sources most of the neutrons of all wavelengths can register at the detector, they use most of the neutrons in a wide band of wavelengths. This is diﬀerent from a steady source, where wavelength analysis requires selec?ng a narrow band from the broad spectrum and rejec?ng the rest. Use of Pulsed and Steady Sources Steady Source flux Pulsed Source wavelength Steady sources use some of the neutrons all of the time. Pulsed sources use all of the neutrons some of the time. 29 The IBR-‐2 Reactor JINR, Dubna, Russia One-of-a-kind pulsed fast reactor Average power 2 MW Frequency 5 Hz Pulse width 250 microsec 30 The Intense Neutron Generator In 1963, the Chalk River Laboratory of Atomic Energy of Canada launched the Intense Neutron Generator (ING) project. The goal was a versatile machine providing a high neutron flux for isotope production and neutron beam experiments. The effort continued until 1968 when the project was cancelled. • Proposed installation: 1.5-km-long proton linac delivering 1.0-GeV, 65. mA (65 MW) steady beam. • Target: flowing lead-bismuth eutectic (LBE), 20. cm diameter, 60. cm long. • Proton beam vertically downward, annular beryllium multiplier 20 cm thick. • Technical developments from the ING project were seminal, although ING was never built. The ING Facility Canadian scientists conceived the ING project in the early 1960s. ING was never built because the proposed accelerator was not feasible at that time. The figure shows the ING facility layout. SNS and Instruments ~20 instruments approved, most in operation, excellent progress with funding. Operating in 2014 with 1.4 MW proton beam power. • DOE, including SING1 and SING2 instrumentation rojects, foreign, and NSF initiatives. Work continues to enhance instrument technology. • International engagement and interest in the instrument suite. • Continuing engagement with scientific community. 33 SNS Target-‐Moderator-‐Reﬂector System 98-6245 uc/vlb! 34 SNS Moderator Intensi1es and Pulse Widths SNS Moderator Intensities SNS Moderator Pulse Widths 1015 1000 Coupled, unpoisoned para-H Coupled, unpoisoned para-H 2 2 Decoupled, poisoned para-H 1014 10 Pulse FWHM, microseconds Intensity, n/ster/eV/pulse 2 Decoupled, 25-mmpoisoned H 2O 13 1012 Decoupled, 15-mmpoisoned H O 2 Decoupled, poisoned para-H 100 2 Decoupled, 25-mmpoisoned H O 2 Decoupled, 15-mmpoisoned H O 10 2 1011 1 1010 109 0.0001 0.1 0.001 0.01 0.1 Energy, electron volts 1 10 102 0.0001 0.001 0.01 0.1 1 102 10 Energy, electron volts Results for 2 MW beam power, 60 Hz pulsing frequency—2.08 x 1014 protons/pulse at 1. GeV. 98-6245 uc/vlb! 35 Types of Neutron Sources CW Spallation Source: SINQ at Paul Scherrer Institut (PSI). 2.2 mA, 590 MeV, 1.3 MW 2x1014 n/cm2/s average flux Advantages • High time-averaged flux. • Uses reactor-type instrumentation (mature technology). • Politically acceptable. • Piggy-backed on existing accelerator. Disadvantages • No time structure. 98-6236 uc/rra! 36 The Spallation Neutron Source SINQ 2000-05271 uc/arb! 37 Types of Neutron Sources Low-‐Energy Neutron Sources Advantages: • Low cost of accelerator. • Low cost of opera?on. • Minimal shielding because of low proton energy. • Cold moderators easy. • Easily adaptable for tes?ng, development and training. • Modest ﬂux implies low ac?va?on of components. Disadvantages: • Modest ﬂux implies long experiment ?mes. • Op?mal design provides only a few neutron beams. 98-6240 uc/vlb! 38 The LENS Low-Energy Neutron Source, Indiana U. protons 98-6240 uc/vlb! 39 How Moderators Work Steady Sources, e.g., reactors Reactor core Reactor core a Reflectormoderator Beam tube Reflectormoderator Neutron beam 98-6240 uc/vlb! 40 Cold and Hot Moderators Steady sources D2O Moderator (~ 300 K) Graphite (2000 C) L-H2 (~ 25 K) Cold-Neutron Beams Insulating Vacuum Cavity-type cold source Gamma rays D2O Moderator (~ 300 K) Hot-Neutron Beams Insulating Vacuum Hot source 98-6240 uc/vlb! 41 Pulsed-‐Source Moderators Decoupled, reflected pulsed-source moderator (Usually cold) Decoupler (e.g., Cd) Moderator (e.g., H2O) Void Liner (e.g., Cd) 1 3 2 Target 4 5 Neutron Beam Channel Reflector (e.g., Be) (all around) 98-6240 uc/vlb! 42 Lists of Sources Research Reactors Pulsed Spalla1on Sources Steady Spalla1on Sources Sources Studied or Under Construc1on Pulsed Spalla?on Sources Pulsed Fast Reactor The IBR-‐2 The Spalla?on Neutron Source (SNS) SNS first operation April 2006. Shown in 2009. At 1.4 MW is the world s leading pulsed spallation source, ~ 8x ISIS;. 47 Japan Spalla?on Neutron Source (JSNS) at J-‐Parc European Spalla?on Source (ESS) at Lund, Sweden A Future Prospect? Very Cold Neutrons (VCNs) are those with Rule of 2 parameters that could be produced from moderators with the spectral temperature of superfluid He (< 2.2 K) and in a broad range thereabout: • Energies ~ 200 micro-eV • Spectral Temperature ~ 2 K. • Wavelengths ~ 20 Å • Speeds ~ 200 m/s. Very Cold Neutrons Neutron optical devices work better at long wavelengths than at conventional wavelengths, because refractive indices are proportional to (wavelength)2, as is gravity droop. Critical angles are proportional to wavelength. Magnetic lenses have advantages over material lenses because they present no absorption and scattering material to the passing neutron beams. New opportunities and new science certainly lie in instruments and techniques based on VCNs. Only one VCN beam relevant for instrument testing exists, PF2 at ILL. Thank You! Questions?
© Copyright 2019 ExploreDoc