D1300 Series Data Sheet

IFS® Line / Fiber Transmission
D1300 Series
IFS RS-485 (2-wire) Point-to-Point
Data Transceivers
Specifications
Data
Data Interface:
Data Rate:
Total Network Pulse Distortion:
*-HS Option Data Rate:
RS-485 (2-wire)
DC - 150 Kbps*
<1μs
DC - 400 Kbps
D1300 and D1300WDMB: 850 nm, Multimode
All others: 1310 nm, Multimode or Single Mode
Wavelength
OVERVIEW
STANDARD FEATURES
2
NumberOfFibers
The IFS D1300 Series data transceivers provide point-to-point
• Meets EIA RS-485 Specifications
• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
data encoding allowing for broad-range compatibility. When used
Operating Temperature, Mechanical Shock, Vibration, Humidity
as a line-terminating
with Condensation, High-Line/Low-Line Voltage Conditions
Electrical&M
echanical device, these modules are also compatible
and Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Power: with the IFS D2300 Series drop and repeat data transceivers.
SurfaceModels
Mount:within this series are available
12 [email protected]
200with
mAmultimode
to 24 VDC
or @ 100 mA Caltrans Specification for Traffic Signal Control Equipment.
Rack: single mode optical fiber. Plug-and-play
From Rack
design ensures ease of
• Automatic Resettable Solid-State Current Limiters
Number of Rack Slots:
1
installation requiring no electrical or optical adjustments. Each
• Power, Transmit and Receive Data Status LED Indicators
Current Protection:
Automatic Resettable Solid-State Current
Limiters
transceiver
incorporates
power
and
transmit/receive
data
status
• No In-field Electrical or Optical Adjustments Required
Circuit Board:
Meets IPC Standard
indicating
LED’s for monitoring proper system operation. The
• Data rates up to 150 kbps NRZ
Size (in./cm.)
(LxWxH)
Surfacemodules
Mount: are available in either 7.0
x
4.9
x
1.0
in.,
17.8
x
12.5
x
2.5
cm
stand-alone or rack mount versions.
• Data Re-clocking
Rack Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm • Transparent to Data Encoding / Compatible with Major Data
Shipping Weight:
< 2 lbs./0.9 kg
Protocols
•
Point-to-Point Network Architecture
APPLICATION EXAMPLES
Environmental
• 2-Wire (Half-Duplex)
MTBF:
> 100,000 hours
• Access
• True Tri-State Output
Operating
Temp: Control Systems -40° C to +74° C
Storage•Temp:
-40° C to +85°
C Systems
Building Automation and Environmental
Control
• Hot-Swappable Rack Modules
Relative•Humidity:
Computer/Data Equipment 0% to 95% (non-condensing)†
• Distances up to 20 Miles (33 km)
• Fire & Alarm Systems
• Comprehensive Lifetime Warranty
†May be extended to condensation conditions by adding suffix ‘–C’ to
•
ITS
Traffic
Signalization
Networks
model number for conformal coating.
Connectors
transmission of half-duplex (2-wire) EIA RS-485 tri-state data signals
Data and
Power:
Terminal Block with Screw Clamps
over one or two optical fibers. The transceivers are transparent to
Optical:
ST
SYSTEM DESIGN
System Design
up to 1.9 miles
(3 km)
D1300
D1300
ifs
International
ifs
Fiber
Systems
Incorporated
Control
Data
International
Fiber
Systems
Incorporated
203.426.1180
203.426.1180
2 Fibers
62.5/125μm MM
Control
Data
Host
interlogix.com
D1300 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS RS-485 (2-wire) Point-to-Point Data Transceivers
Ordering Information
Multimode 62.5/125µm**
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
D1300
RS-485 Data Transceiver (850 nm)
2
11 dB
1.9 miles (3 km)
D1300WDMA
RS-485 Data Transceiver (850 nm)
1
11 dB
1.9 miles (3 km)
D1300WDMB
RS-485 Data Transceiver (1310 nm)
1
11 dB
1.9 miles (3 km)
D1320
RS-485 Data Transceiver (1310 nm)
2
10 dB
6 miles (10 km)
Single Mode 9/125µm
D1325
RS-485 Data Transceiver (1310 nm)
2
11 dB
20 miles (33 km)
Accessories ♦
PS12VDC1.5A-U
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured. WDMA must mate with a WDMB
Specifications
Data
Data Interface:
RS-485 (2-wire)
Data Rate:
DC - 150 Kbps*
Total Network Pulse Distortion:
<1µs
Wavelength
D1300 and D1300WDMB: 850 nm, Multimode
All others: 1310 nm, Multimode or Single Mode
Number Of Fibers
1 or 2
Connectors
Date and Power:
Terminal Block with Screw Clamps
Optical:
ST
Electrical & Mechanical
Power:
Surface Mount:
12 VDC @ 200 mA to 24 VAC @ 100 mA
Rack:
From Rack
Number of Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 5.0 cm
Shipping Weight:
< 2 lbs./0.9 kg
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
Agency Compliance
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C*
Storage Temp:
-40° C to +85° C*
Relative Humidity:
0% to 95% (non-condensing)
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
Part Number
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
Accessories♦
Options
De
RS
RS
RS
RS
RS
RS
RS
D1300 Series
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Add ‘-R3’ to Model Num