JIT SILICONES + Food Grade Silicone Fluids • Water-clear silicone fluid available in viscosity ranging from 0.65 to 60,000 cps (mm²/s) • Little change in physical properties over a wide temperature range. • Relatively flat viscosity-temperature slope, and serviceability from -40°C up to 200°C • Excellent water repellency • Good Dielectric Properties • Soluble in a wide range of solvents FLUID APPLICATIONS: Release Material: Used alone or as part of a compounded formula, JITS+ Silicone Fluid provides a non-carbonizing mould release for rubber, plastics, and metal die castings. Foam Preventative: Extremely small amounts of the fluid effectively control foam in many processing operations. Mechanical Fluid: Excellent viscosity-temperature characteristics, thermal and chemical stability, shear-breakdown resistance, compressibility, and rubber compatibility make JITS+ Silicone Fluid outstanding for mechanical and hydraulic uses. Uses include hydraulic stabilizers and or damping media. Lubricant: The fluid provides excellent lubrication for most plastic and elastomeric surfaces. Lubricity with metals depends upon the combination involved. Care should be taken to select suitable metals for pumps and other items with moving parts. Viscosity: 350cs JIT Silicones + A Division of Sensible Components, LLC P.O. Box 6501 Clearwater, FL 33758-6501 Phone: (855) JIT-PLUS (855)548-7587 www.jitsiliconesplus.com Standard package sizes: ITEM # SIZE NOTE 30000 1 gallon pail Plastic Pail 30001 5 gallon pail Plastic Pail 55 gallon drum Metal Drum 30002 Available from: rev. 02-2013 JIT 350 cSt Food Grade Silicone Fluid FEATURES • High viscosity index • Excellent Thermooxidative Stability • Essential nontoxic and nonbioactive • Nonstinging to the skin • Comparable to XIAMETER® PMX-200 Silicone Fluid COMPOSITION Dimethyl polysiloxane fluid APPLICATIONS Surface treatment, release material, lubricant and processing aid in food processing and packaging applications. STORAGE Has a usable life of 48 months from the date of manufacture when stored in original container at below 40°C (104°F) JIT Silicone Fluid is a 350 cSt dimethylpolysiloxane silicone fluid used to improve lubricating characteristics under wide temperature operating conditions. Dimethylsiloxane polymers display an extraordinary combination of fluid properties including excellent thermooxidative stability, high viscosity index, essential nontoxic and nonbioactive and nonstinging to the skin. TYPICAL PROPERTIES The values reported on this sheet should not solely be used for preparing specifications on this product. Please contact us for assistance in preparing a specification. Typical Property Value Color Clear Viscosity, (cSt) 350 Acid Number, BCP Trace Melt Point °C (°F)1,2 -60C Pour Point °C (°F) -100C Flash Point, Open Cup °C (°F) Surface Tension at 25°C (77°F), dynes/cm Specific Gravity at 25°C (77°F), g/cm3 211C 20.1 0.99 Refractive Index at 25°C (77°F) 1.3989 Coefficient of Expansion cc/cc/°C 0.00108 Dielectric Strength at 25°C (77°F), volts/mil Volume Resistivity at 25°C (77°F), ohm-cm 375 1.0 x 1015 CERTIFICATIONS Meets the requirements for FDA Lubricants for Incidental Food Contact. The use of this product as a defoaming agent is permissible in nonstandardized foods (other than milk) in amounts up to 10 ppm under the Federal Food, Drug and Cosmetic Act. Any limitations on use in standardized foods, or the like, should be observed. This product can be used in the manufacture of such food packaging materials as paper and paperboard, animal gluies, adhesives and other packaging materials, subject to appropriate limitations on extractables. See FDA regulations 21CFR 173.340, 175.300, 176.210, 175.105, 176.170, 178.3120 and 177.1210. LIMITATIONS JIT 350cs Silicone Fluid is not known to cause any harmful effects. Refer to our Material Safety Data Sheet for detailed safety information. This product is neither tested nor represented as suitable for medical or pharmaceutical uses. NOT intended for human injection. PACKAGING JIT Silicone Fluid is available in 55 gallon drums, 5 gallon pails, or 1 gallon pails. Special packaging and private labeling is available upon request.
© Copyright 2019 ExploreDoc