Trusted Assembly and Test Services

Trusted Assembly and Test Services
Fact Sheet
Aeroflex Colorado Springs received Category 1A Trusted
Accreditation by the Defense Microelectronics Activity as
a Microelectronics Trusted Source for DoD and all other
U.S. government users. The scope of accreditation includes:
 Design, Packaging /Assembly, Test and Aggregation/
Brokering of multi-project-wafers into Trusted Foundries.
Aeroflex offers:
 Trusted foundry access with ASIC Design Services for
radiation hardened and non-hardened program
- IBM - 90nm
- ON Semiconductor - 0.6m
One stop solution for your integrated assembly, evaluation, test and screening requirements
 Quick-turn capabilities available
 QML Q and QML V flows, MIL-PRF-38535 compliant,
ISO-9001 certified
Element evaluation
Certified known good die program available
Value-added services such as radiation testing, secure
testing and COTS/commercial upscreening
Class 100, 5100 sq. ft. Clean Room
Analytical and DPA services
 Customer Furnished Tooling - Aeroflex has experience
in assembling customer originated die, packages, test
and screening requirements into a smooth, seamless
high quality process.
 Radiation Testing - Aeroflex RAD offers a comprehensive commercial radiation effects testing based in the
US and UK. From Total Ionizing Dose (TID) test to
complex Single Events Effects (SEE) tests, complete
turnkey services are available. DSCC/DLA suitability
for radiation test methods 1019, 1017, 1020, 1021.
 Secure Testing - Aeroflex has tested parts in a secure
environment for classified programs for over 27 years.
The facility and employees have the necessary clearances and the proper training.
 COTS/Commercial Upscreening - Aeroflex’s experience in the high-reliability marketplace allows us to
perform additional testing and burn-in to your commercial parts to meet customized military requirements.
 Space Qualified Assembly Services - Aeroflex is a DLA
certified QML V manufacturer of space qualified ICs.
Aeroflex can provide a complete solution for your integrated assembly, evaluation, test and screening requirements.
 Assembly
- Wafer Backgrind
- Wafer Saw
- Assembly and Wirebond
State-of-the art wirebonding; 60 mil pitch available
- Hermetic packages available
LCC, PGA, QFP, DIP, FP, Multi-chip modules
- Solder Dip -- Meets MIL-STD-883, Method 2003
- Mark
Custom marking including serialization. Meets
MIL-STD-883, Method 2015
- Internal Visual
Meets MIL-STD-883, Method 2010, Cond A or B
 Burn-In Services
- Static/Dynamic Burn-in
- Accelerated Life Test
 Electrical Test
- Wafer Level DC Parametrics
- Memory, Logic and Analog IC Testing
- Wafer Probe and Package IC Testing
- High and Low Temperature IC Testing
- Teradyne Testers with 1024 digital pins and frequen
cies up to 800 MHz
 Environmental Test
- Hermeticity
Meets MIL-STD-883, Method 1014,
Cond A1, A2, C3
Meets MIL-STD-883, Method 2020, Cond A, B
- Centrifuge
Meets MIL-STD-883, Method 2001, Cond A, B, C,
D, or E
- Temp Cycle
Meets MIL-STD-883, Method 1010, Cond A, B, C,
D or F
- Mechanical Shock and Variable Vibration
Meets MIL-STD-883, Method 2007
 Failure Analysis diagnostic capability the transistor
- EDS, SEM, E-Beam, DPA
Aeroflex Colorado Springs - Datasheet Definition
Advanced Datasheet - Product In Development
Preliminary Datasheet - Shipping Prototype
Datasheet - Shipping QML & Reduced Hi-Rel
[email protected]
Aeroflex Colorado Springs, Inc., reserves the right to
make changes to any products and services described
herein at any time without notice. Consult Aeroflex or an
authorized sales representative to verify that the
information in this data sheet is current before using this
product. Aeroflex does not assume any responsibility or
liability arising out of the application or use of any product
or service described herein, except as expressly agreed to
in writing by Aeroflex; nor does the purchase, lease, or
use of a product or service from Aeroflex convey a license
under any patent rights, copyrights, trademark rights, or
any other of the intellectual rights of Aeroflex or of third
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused