RSH SERIES CUSTOM RACKMOUNTS A&E SPEC. # 96-999 (LCD) A&E SPEC. # 96-034 (COMPONENT) TIA/EIA COMPLIANT The Professional’s Choice for Mounting and Trimming Non-Rackmount Components With the innovative RSH custom rackmounts, virtually any component can be installed in a standard 19” enclosure without modification. Custom cut to provide a perfect opening for the face of the component that is being mounted, each RSH unit provides a neatly-trimmed installation with a perfect fit and no gaps. With accurate details on over 8,000 components in our measured unit database, chances are we have the component needed on file. Unit assembles easily in minutes and includes rear brackets to prevent the mounted component from sliding back. A ventilated bottom promotes cooling. Depending on the needs of the installation, the units can be ordered with a black textured finish (model RSH4S), a silver brushed and anodized finish (model RSH4C) or a black brushed and 1 anodized finish (model RSH4A). Bottom depths are automatically provided in 11 / 2 ”, 14”, 15 1/ 2 ”, 17 1/ 2 ”, or 20 1/ 2 ” styles. Custom rackmounts will accept any component up to 17 3/ 4 ” wide. Individual fascias (less rack ears and shelf bottom) are also available in a black textured finish (model SFACE), silver brushed and anodized finish (model CFACE) or a black brushed and anodized finish (model AFACE). LCD rackmounts also available to mount most LCD monitors with up to a 17” screen size or with a maximum width of 17 3/ 8 ”. NOTE: custom rackshelf height is specified at the factory based on physical restrictions. Visit middleatlantic.com to find heights on all measured components. Part # & Finish RSH4A black brushed and anodized RSH4C silver brushed and anodized RSH4S black textured powder coat Pg. Matching Finish TA Trim Strip 120 Media Holders (CD, VHS, VHS-L, CD-1, LP, DVD) 120 D Series Rack Drawers 121 QFP Quiet Fan Panels 112 FP Fan Panels 112 BL, HBL Blank Panels 130 VTP, EVTA Ventilation Panels 131 TC Trim Strip 120 Media Holders (CCD, CVHS, CVHS-L, CCD-1, CLP, CDVD) 120 DC Series Rack Drawers 121 CHBL Blank Panels 130 CVTP, EVTC Ventilation Panels 131 TS Trim Strip 120 Media Holders (TCD, TVHS) 120 TD Series Rack Drawers 121 QTFP Quiet Fan Panels 112 TFP Fan Panels 112 SB Blank Panels 130 VT, EVT Ventilation Panels 131 installation by Home Systems RSH brackets included! custom rackmount with component installed and clamp option RSH custom rackmount RSH LCD mounts available RSH shown with Xbox 360™ accommodates most LCD screens up to 17” in size, or with a 3 /8 ” maximum width of 17 (rear) Distributed by Multicom, Inc. www.multicominc.com RSH silver brushed and anodized finish available 1076 Florida Central Parkway, Longwood, FL 32750 Toll free: 800.423.2594 Phone: 407.331.7779 Fax: 407.339.0204 [email protected] RSH SERIES CUSTOM RACKMOUNTS optional clamping bars RSH Clamp Options Part # RSH clamp option (shown with component installed) Finish RSH4A black brushed and anodized RSH4C silver brushed and anodized RSH4S black textured powder coat -C clamp kit for all above AFACE black anodized face plate only CFACE silver anodized face plate only SFACE black textured face plate only Ordering Instructions Visit middleatlantic.com to see if the dimensions for the component to be rackmounted already exists among the over 8,000 on file. If we don’t have the dimensions, we strongly suggest that you insure the component and ship it to us via UPS so that we may accurately measure it. We will ship the component back to you insured, the next day. The complete custom rackmount will follow within the next 2 business days. A second ordering option for custom mounting components with dimensions we don’t have on file is to fax us the measurements using the form on this page. The W, H, and F dimensions shown in the illustration MUST be accurate within œ ”, depth can be within 8 ”. The use of dimensions provided in the component’s owner’s manual are NOT recommended. Please measure carefully as RSH units are custom-made and non-returnable. Micro Fiber Cleaning Cloths keep anodized finishes clean, see pg. 133 installation by Home Systems If we need dimensions please photocopy, fill in and fax W company name: H F p.o.#: Black brushed and anodized finish Silver brushed and anodized finish Black textured finish dimensions (must be within 1/ 32 ”) brushed and anodized blank panels complement RSH Series custom rackshelves, see pg. 130 HBL2 mak e: model: W=face width: H=face height: F=foot height: Depth: Please visit our website for a complete list of measured components. Distributed by Multicom, Inc. www.multicominc.com 1076 Florida Central Parkway, Longwood, FL 32750 Toll free: 800.423.2594 Phone: 407.331.7779 Fax: 407.339.0204 [email protected] RACK ACCESSORIES When dealing with mobile applications or seismic issues, use the RSH clamp option to secure components to the shelf. Clamping bars have rubber bumpers to maintain a tight grip while keeping components scratch-free.
© Copyright 2017 ExploreDoc