Model Fold'

Model Fold' n Go FT3620
Mobile Screening Plant
Model FT3620 Spec Sheet
Operational Mode
Transportation Mode
DELIVERY CONVEYOR
FINES CONVEYOR
One (1) 39’ x 48” conveyor with hydraulic variable
speed (350 FPM); hydraulic raise
Full-length skirtboards
12” self-cleaning wing pulley
Belting is 3-330-3-1; 1/2" cleat
SIDE CONVEYORS
Two (2) 29’ x 30” swing out conveyors
Hydraulic variable speed (0-350 FPM)
Folds for transport
Belting is 2-220-3-1; ½” cleat
Receiving hopper for both conveyors
One (1) 29'10" x 48" conveyor with hydraulic variable
speed (350 FPM)
Folds for transport
12” self-cleaning wing pulley
Belting is 220 PIW, 1/8 x 1/16 cover
CROSS CONVEYOR
One (1) 6' x 24" conveyor with hydraulic variable speed
(350 FPM)
Formed plate; stationary within frame
220 PIW; 1/8 x 1/16 cover, 1/2” cleat
NOTE: Specifications are subject to change without notice.
OVERS CONVEYOR
One (1) 31' x 24" conveyor with hydraulic variable
speed (350 FPM)
Folds for transport
Rubber lagged head pulley
220 PIW; 1/8 x 1/16 cover, 1/2” cleat
HOPPER
10 cubic yard head capacity
Heavy-duty grizzly with 6" opening
Hydraulic dump
FEEDER
One (1) 13' x 48" conveyor with hydraulic variable
speed (0-60 FPM)
Rubber lagged head pulley
330 PIW, 3/16” x 1/16” cover
CHASSIS
20" formed plate
Tracks w wireless remote control
POWER SYSTEM
173 HP Tier IV C6.6 Cat diesel engine
Engine mounted hydraulic pumps to operate all plant
functions
NEMA-4 rated instrument panel
Emergency stops
VIBRATING SCREEN
One (1) 3620K triple deck Kolberg® screen
6’ x 20’ top deck and middle deck
6’ x 18’ bottom deck
Decks driven by 900 RPM vibrating mechanism
mounted on screen
Adjustable amplitude with add on weights
Hydraulic controls for variable angle operation
Top and bottom deck discharge chutes
Aggregate spreader; Fixed access ladder with wrap
around walkway
Less screen cloth (top/ middle deck side tension;
bottom deck rotary end tension)
PLANT CAPACITY
Up to 700TPH of 8" feed material (tonnages will vary
with conditions)
PAINT
One primer coat, finish coat of KPI Beige
SERVICE CAPACITY
140 gal. fuel tank
150 gallon hydraulic reservoir with return filters
OPTIONS
Standard steel screen cloth for FT3620
Remote control grizzly
Wings for funneling feed material onto feed hopper
Hammermill shredder
Ball tray for bottom deck module
Rinser to include spray bars and collection flume
Blending gates
CONSULT FACTORY FOR ADDITIONAL OPTIONS
PHYSICAL OPERATION CHARACTERISTICS
Overall Length............................................61'9"/18.87m
Travel Length............................................58'11"/17.95m
Operating Height........................................21'5"'/6.55m
Travel Height................................................12'/3.66m
Operating Width........................................49'11"/15.21m
Travel Width................................................11'11 /3.59m
Unit Weight.....................................85,000lbs/38,555 kg
2704 West LeFevre Road
Sterling, IL 61081
Phone: (815) 626-6374
FAX: (815) 626-6430
[email protected]
www.kpijci.com
NOTE: Specifications are subject to change without notice.
Because Astec Mobile Screens may use in its catalog & literature, field photographs of its products which may have been modified by the owners, products furnished by Astec Mobile Screens may not
necessarily be as illustrated therein. Also continuous design progress makes it necessary that specifications be subject to change without notice. All sales of the products of Astec Mobile Screens are subject to
the provisions of its standard warranty. Astec Mobile Screens does not warrant or represent that its product meet and federal, state, or local statures, codes, ordinances, rules, standards or other regulations,
including OSHA and MSHA, covering safety, pollution, electrical wiring, etc. Compliance with these statutes and regulations is the responsibility of the user and will be dependent upon the areas and the use to
which the product is put by the user. In some photographs, guards may have been removed for illustrative purposes only. This equipment should not be operated without all guards attached in their normal
position. Placement of guards and other safety equipment is often dependent upon the area and the use to which the product is put. A safety study should be made by the user of the application, and, if
required additional guards, warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products.
Mdl Fold' n Go FT3620 Printed in USA; 10/20/2014