Racing Products Catalogue

BREMBO RACING
BRAKE SYSTEMS
2015-2016
Via Brembo 25
24035 Curno (BG) - Italy
Tel.: +39 035 605 1111
Fax: +39 035 605 2766
E-mail: bremboracing@brembo.it
BREMBO RACING BRAKE SYSTEMS 2015-2016
BREMBO S.p.A.
INDEX
INTRODUCTION
2
INSTRUCTION FOR INSTALLATION AND USE
4
DISCLAIMER
12
SEC. 1A - C
ALIPERS
14
SEC. 1B - CALIPERS DRAWINGS
32
SEC. 2 - DISCS & FIXINGS
50
SEC. 3 - MASTER CYLINDERS & RESERVOIRS
66
SEC. 4 - PEDAL BOX
74
SEC. 5 - TYPICAL BRAKE SYSTEMS
78
SEC. 6 - BRAKE FLUID & TEMPERATURE RECORDS
116
SEC. 7 - SPARE PARTS
122
The data contained in this catalogue are provided for information purposes
only and therefore may be subject to change.
1
INTRODUCTION
UK
I
D
E
DK
Brembo,
#1F for brakes
Brembo is the world’s leading maker of braking systems
for motor cars, motorcycles and commercial vehicles.
The organization operates on 3 continents, with production
sites in 16 countries and sales networks in 70 national
territories around the world.
Research never ceases
The Brembo Group has over 7,600 collaborators, nearly 10%
of whom are engineers and product specialists involved in research
and development.
Brembo - all done in-house
The entire manufacturing process is an in-house operation: design,
development, testing, machining, quality control, distribution and
service.
Brembo means top quality
Brembo brakes are manufactured in conformity with ISO 9004 and
ISO 14001 standards. Aftermarket products are covered by the
Brembo Warranty and carry ABE/TÜV certification from the German
Federal Road Safety Office.
Top vehicle makers use Brembo
Brembo produces original equipment braking systems for the top
vehicle makers: Aston Martin, Audi, BMW, Cadillac, Chrysler, Ferrari,
Ford, General Motors, Honda, Lexus, Jeep, Land Rover, MercedesBenz, Mitsubishi, Nissan, Porsche, Subaru, Volkswagen, Volvo, to
name but a few.
2
Brembo, racing, and winning
For about 40 years, Brembo has been equipping the cars and bikes
of elite drivers and riders competing in motor sports at world
championship levels.
Brembo High Performance
The experience accumulated through years of intensive
research in the competition field has allowed us to
create product lines that are differentiated on the basis
of the application types and different research and
development procedures adopted. Thanks to the
results obtained, car sports enthusiasts, who insist on
replacing original brake systems with Brembo High
Performance equipment, are able to improve their
riding style in terms of performance and safety while
also ramping up the overall aesthetic appeal of their
machines.
For additional information, please refer to our website
www.brembo.com
3
INSTRUCTION
FOR INSTALLATION
AND USE
Purpose
To show the correct procedures for the mounting and use of BREMBO braking systems
for racing cars, with cast-iron brake discs.
Reservoir choice
The capacity of the reservoir must be such that when the brake fluid is between the MIN
and MAX levels the volume is at least equal to that required by the brake pistons stroke
in case of maximum pad and rotor wears.
Mounting of the reservoir
a. Use the pipe fittings and the washers (in copper or in rubber) foreseen by the supplier
of the reservoir.
b. In order to avoid any vacuum inside the reservoir, as a consequence of the brake fluid
level lowering, it is always necessary to have a hole diam. 1 mm in the reservoir cap,
independently from the presence of the bellows diaphragm in the reservoir.
Master-cylinder
Choice of the master cylinder
a. The master cylinder diameter must be chosen in function of the type of calipers which
have to be fed, of the brake pedal ratio and of the max pressure we want to obtain:
every variation of the master cylinder diameter involves an increase or a decrease of
the master cylinder area of about 15%.
b. The rubber boot, between the push rod and the hydraulic part, must always be
assembled.
1 MIN
Brake pedal mechanism (system controlled by 2 master cylinders)
a. The brake pedal mechanism must be designed and manufactured in order to allow
a complete stroke of both master cylinders. In case of systems where the strokes of
the two master cylinders are very different from each other, it is necessary that the rod
connecting the two push rods be at the appropriate angle.
b. For a more linear operation of the brake pedal/master-cylinder mechanism, it is
important that the distance between the pedal fulcrum and the push rods is equal or
greater than 40 mm (see Fig. 1a).
c. Furthermore, it is also important that in the rest position, the rod axle is placed back of
10 - 12mm compared to the fulcrum axle.
d. Check that in the rest position the rod connecting the two push rods is perpendicular
to both push rods.
e. Check that between the joints of the rod connecting the two push rods and the
pedal there is a clearance of at least 1 mm each side, in order to allow the eventual
inclination of the rod compared to the push rods axle (see Fig. 1b).
POSITION
CORRESPONDING TO
MAX PRESSURE
REST POSITION
POSITION
CORRESPONDING TO
MAX MASTER-CYLINDER
STROKE
1 MIN
40 MIN
Fig. 1a
4
10-12
30
Fig. 1b
FIG. 1b
+
+
+
+
+
+
+
+
+
+
+
+
Brake discs
Assembly of bell and disc
a. Clean the cast iron braking ring, eliminating every trace of grease or
oil.
b. Mount the bell on the braking ring using the BREMBO mounting
bush system (the assembly of the bell on the disc must be carried
out without any interference).
c. Check that the “floating” is correct, that the axial clearance between braking ring and bell meets the values prescribed by Brembo.
Assembly of the complete disc on the wheel hub
a. Verify that the disc bell and wheel hub mounting faces are free from
burrs and dents; otherwise these surfaces should be reconditioned.
b. The disc must fit onto the wheel easily.
c. Apply thermal paints on the disc external diameter (included the
eventual fins and pillars) in order to monitor operating temperature.
Inspections
a. Check that the disc clearance is the one prescribed by Brembo,
even after assembly on the car.
b. Check before and after the use that the disc doesn’t touch in any
part of the caliper.
Calipers
Mounting
a. The caliper fixing to the upright can be carried out with bolts or with
gauged stud bolts and nut; this system allows a more rigid fixing
and it is recommended for all the applications on calipers with the
radial fixing.
b. Mount the caliper onto the knuckle such that the arrow marked on
the inner half-caliper corresponds to the forward direction of rotation of the brake disc (the disc must enter the caliper through the
side corresponding to the smaller piston and exit through the other
side corresponding to the larger piston).
c. The caliper must be mounted in a symmetrical position with respect
to the disc center line: the difference between the dimensions “a”
and “b” must be 0,6 mm MAX (see fig. 2).
a = b : 0,6 mm MAX
Fig. 2
b
a
5
FIG.2
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
INSTRUCTION
FOR INSTALLATION AND USE
0.3 MAX
0.3 MAX
d. The disc and pads protrusion must be 0,3 mm MAX (see Fig. 3 and Fig. 4).
Fig. 3
Fig. 4
0.5 MIN
0.2 MIN
e. Check that in no workingFIG.3
condition the pads touch the disc fixingFIG.4
bell or the upright.
f. Assembly and disassembly of the pads must occur without any force; the pads radial and lateral clearance inside the caliper must be 0,2 mm MIN; with the pistons in
backward position, the clearance between them and the back plate must be 0,5 mm
MIN (see Fig. 5).
Fig.
FIG.5
5
0.3 MIN
g. The clearance between disc outer circumference and Caliper Bridge must be 2 mm
MIN, with a difference between the two sides of 0.4 mm MAX (see Fig. 6).
d=
2,5
c=
c = d : 0.4 MAX
6
Fig.FIG.66
2,5
h. The M 10x1 bleed screws tightening must be carried out with a
torque of 12 - 16 Nm. Apply thermal tape on the external halfcaliper in order to monitor operating temperature these can be
supplied by BREMBO under part number R 02.5168.10/25.
Master-cylinder/caliper connection
Choice of tubing
a. Where it is possible, we recommend the use of steel rigid pipes, since
they do not increase brake fluid displacement.
b. In case, flexible brake hoses are used, it is necessary to use the Teflon type
with braided steel sheath.
c. The hoses internal diameter must be 2.5 or 3 mm; the brake fluid displacement
of 1 meter of these hoses is 0.2 cm MAX (for the type having internal diameter
2.5 mm), and 0.3 cm MAX (for the type having internal diameter 3 mm) at the
pressure of 70 bar; hoses with a smaller diameter restrict fluid flow, while hoses
with a bigger diameter would considerably increase the brake fluid displacement
of the system.
Mountig
a. Pipe fittings must be tightened to the prescribed torque.
b. The pipe fittings seal must be sealed with annealed aluminum or copper seals;
these seals can be used only once.
c. Check that tubes are not squashed or pinched and that they are not subjected to
high temperatures (in the vicinity of the engine, exhaust pipes, etc.)
Brake fluid
Choice
a. Use only high boiling point DOT 3 or DOT 4 brake fluids.
b. Use only brake fluid from a new and sealed container.
c. Change brake fluid before each race.
Notes
a. Use of liquids other than brake fluids will damage the braking system
components.
b. Since the brake fluid is hygroscopic, we have to consider that in presence of high
humidity, the boiling point can be considerably lowered; in these cases the brake
fluid has to be replaced daily.
7
INSTRUCTION
FOR INSTALLATION AND USE
Braking system bleeding
a. In the case of a braking system controlled by two parallel master cylinders operated
by a rod, bleed one front and one rear caliper, in order to allow both master cylinders a
complete stroke.
b.Every time the pedal is back, let master cylinder refill simultaneously for at least 2
seconds before pushing the pedal.
c. When the bleeding is finished, keep in pressure for at least 10 seconds, checking that
there aren’t any leakages.
d. Refill the reservoirs.
Working inspections
After running a few kilometers, proceed with the following inspections:
a. The wheels must rotate freely without any residual torque.
b. There must be no contact between disc and caliper.
c. No pulsations must be felt on the pedal, otherwise identify which disc causes the
problem and check again the disc/bell and bell/hub assemblies.
Running-in
For the discs and pads burnishing, it is necessary to follow the running in procedure
relative to the friction material used; it is however necessary to assure that during the first
kilometers, low pressure applications are carried out for short times in order to allow the
bedding of all the pad surface on the disc. Only later you will be able to proceed to the
real running in which will end when every pad has reached the best working condition.
The running in procedure (bedding of the disc/pads coupling surfaces) must also be
carried out when already run-in or used pads are used. Only after the running in is
performed, it is possible to take advantage of the braking system braking capacity.
Braking system final inspections
a. There must not be any interference between disc and caliper.
b. The max temperature reached by the calipers must be lower than 180°C (inspection to
be carried out through the thermo tapes applied on the calipers).
c. Check the working temperature of the discs, verifying the changes occurred to the
thermal paints applied on the external diameter of the discs.
If the braking system performance is not considered satisfactory, it is necessary to
reduce the discs ventilation. Furthermore a rapid quick cooling could increase the risk
of cracks on the discs. If discs reach high temperature, it is necessary to improve the
cooling. A high working temperature of the discs causes a decay of the braking power
and excessively high temperatures in the brake calipers.
Fig. 7
8
Braking system balancing
The braking system has to be chosen in function of the vehicle
characteristics; it is very important that the max braking power be
equally distributed between the front and the rear axles; when the
braking system is correctly balanced, the working temperatures of
the front and rear brakes must be similar. It is possible to adjust brake
balance between the front and rear axles through the adjustment rod, but
only for variations up to 10% MAX: in fact the pedal force must be always
applied in the vicinity of the center of the adjusting rod in order to obtain a
good efficiency of the brake pedal mechanism. If the system isn’t balanced
even after adjusting, the causes must be searched somewhere else: master
cylinders diameter, caliper type, disc diameter etc. In any case, before replacing
any components, it is necessary to make sure that the combination of components
works correctly. A good general rule to obtain a good efficiency is however to have
as similar as possible the master cylinders loads and strokes.
Fig. 8
5 MAX
5 MAX
Inspection of the braking system after use
After every race, it is necessary to proceed with the following inspections and
interventions:
Fittings
Verify that there are no leakages from the various components, connections, or
fittings. If a leak is found on one of the fittings, either increase the tightening torque,
or replace the defective component.
Brake disc
Check carefully the disc braking surfaces.
The disc can’t be used again if:
- on the braking surfaces there are cracks having length higher than 5 mm; in case
the crack begins from the external or internal diameter, even if the length is shorter,
the disc must be replaced (see Fig. 8).
- It has a wear of 1 mm compared to the new thickness (0,5 mm on both sides);
- The braking surfaces show scorings, which can damage the correct pad/disc
contact.
Calipers
a. Check that the external half calipers connecting pipes are not bent or dented,
caused i.e. by the entrance of stones between the wheel and the caliper; in case of
damage, overhaul the caliper.
b. Check the max temperatures reached by the caliper, checking the thermo tapes
applied on the internal half caliper:
c. if a temperature of 180°C is reached, we
recommend the overhauling of the caliper or to
replace the seals;
d. If a temperature of 210°C is reached (max value
of temperature the caliper can stand for short
periods), it is absolutely necessary to overhaul
immediately the caliper and search the causes of
the overheating, since under these conditions the
correct operation of the brake isn’t guaranteed
anymore.
UNACCEPTABLE
CRACKS
FIG. 8
9
INSTRUCTION
FOR INSTALLATION AND USE
Pads
Pad wear inspection
Pads should not have a friction material thickness lower than 2 mm MIN; if the pads
are excessively worn, they must be changed.
Abnormal wear
The pads must no show excessively anomalous or uneven wears; the following must
be checked:
a. Pad tangential taper wear difference must not exceed 1 mm MAX, bearing in mind
that the direction of wears of the same caliper must be according to what shown
on the Fig.9.
1 MAX
1 MAX
FIG.9
b. Pad radial taper wear difference must not exceed 1 mm MAX, bearing in mind that
the direction of wears of the same caliper must be according to what shown on the
Fig.10.
0.5 MAX
0.5 MAX
FIG.10
10
0.2 MAX
Defective or excessively worn pads must be changed.
BACK PLATE DEFORMATION
Back plate flatness error must not exceed 0.2 mm MAX (see Fig. 11);
- in case of excessive back plate flatness error, the pads must be
changed.
FIG.11
General notes
Overhauling and replacement
- Master Cylinder
These must be overhauled after 5000 km MAX of running, or when problems arise;
- Calipers
They must be overhauled after 5000 km max of running, or when problems arise, or
if the temperatures go above those shown through the thermo tapes applied on the
calipers.
Various
a. The external cleaning of the master cylinder and calipers must be carried out with
noncorrosive agents and anyway not with solvents, gasoline or similar, since these
products could damage rubber components (seals and dust boots).
b. During warehousing protect the inlet and outlet holes of the master cylinder and of
the calipers with the appropriate caps.
c. Half-caliper union bolts cannot be re-screwed, or carry out modifications to the
calipers.
d. Replacement of components with non-BREMBO parts is not permitted.
e. BREMBO recommends the overhauling of its products through its own authorized
personnel; therefore BREMBO doesn’t take the responsibility for overhauling
carried out by someone else.
11
DISCLAIMER
OF WARRANTY
Brembo’s “racing” products are designed and manufactured to be used exclusively in
competitions and, therefore, shall not be used on public roads. Thus, Brembo shall not
have any liability whatsoever in
connection with the use of the products in violation of such limits and/or in connection
with the normal wear and tear of such products, nor shall any “Product Liability” apply in
such cases. Any alteration of or tampering with the “racing” products may endanger their
safety and any guarantee (concerning both contractual and tortuous liability) given by
Brembo in respect of the products will be terminated by any such alteration or tampering.
Installation and maintenance
Brembo’s “racing” products must be installed by highly qualified and competent
professionals working in the “racing’ field, who have been specifically trained to
operate such kind of products. The “racing” products shall be submitted to periodical
maintenance. Detailed instructions for both installation and maintenance of such
products are set forth within the products wrapping (hereinafter the “istructions”).
Thus, Brembo shall not have any liability whatsoever in connection with Client’s failure
to comply with the instructions and/or in connection with their inappropriate and/or
incorrect installation on vehicles and/or with the lack of and/or incorrect maintenance of
such products, nor shall any “Product Liability” apply in such cases.
Conditions of use
The Clients acknowledge and accept that due to the particular operative and
environmental conditions under which the racing products operate during competitions,
such products may be subject to use under extreme conditions, which may exceed the
project limits and control as set by Brembo. Thus, Brembo shall not have any liability
whatsoever in connection with the use of the “racing” products under extreme conditions
during the competitions, nor shall any “Product Liability” apply in such case.
Limits to contractual guarantees
Brembo guarantees that the “racing” products are manufactured with high quality
materials and in accordance with the specifications provided by the Manufacturer.
Should the Client, having received the “racing” products. notice either an apparent or a
hidden defect, he shall communicate it in writing to Brembo within 8 (eight) days from the
date of their delivery. The Client shall, at his own expense, deliver the defective products
ex works BREMBO, in accordance with the instructions given by BREMBO. Only in case
a defect has actually been ascertained by Brembo’s quality control office, the defective
parts of the “racing” products will be replaced. In any event, Brembo’s liability, as well as
the liability of its agents and/or distributors and/or any other brokers shall not exceed the
sale price of the “racing” products. The guarantee does not apply in case the “racing”
products have not been installed and maintained in accordance with the instructions.
Brembo’s liability does not exceed the limits set forth in this paragraph and no further
guarantee, neither express nor implied, which may determine an extension of such
liability, is hereby given. Except upon Brembo’s express written authorization, none of its
agents and/or distributors and/or other brokers are authorized to give further guarantees
other then those provided for in the Sales Conditions.
It should be observed that Brembo guarantees the materials produced by its suppliers
within the limits of the guarantees given by such suppliers to Brembo.
12
13
1
a
CALIPERS
14
15
1a
P/N XA6.L6.11/12
2 PISTON CALIPER
Typical application: Formula Student
Mounting information
TrailingLeading
LH XA6.L6.11
RH XA6.L6.12
Technical Specifications
Piston Size (mm) 36
Piston Area (cm2)
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
20,35
32
14,6
TBD
20
316
114
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
29,79
M10x1.5
2 Pieces
Aluminium
1,42
20,56
22,68
26
15
N/A
6,4
278
95
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
28
10,23
Monobloc
Aluminium
steel
0,96
20
25,13
26
15
N/A
6,4
278
95
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
28
10,23
Monobloc
Aluminium
steel
0,96
22
P/N XA8.U2.01
2 PISTON CALIPER
Typical application: Various
Mounting information
TrailingLeading
LH XA8.U2.01
LH XA8.U2.01
RH XA8.U2.01
RH XA8.U2.01
Technical Specifications
Piston Size (mm) 38
Piston Area (cm2)
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XA8.U2.11
2 PISTON CALIPER
Typical application: Various
Mounting information
TrailingLeading
LH XA8.U2.11
LH XA8.U2.11
RH XA8.U2.11
RH XA8.U2.11
Technical Specifications
Piston Size (mm) 40
Piston Area (cm2)
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
16
P/N XA8.U2.21
2 PISTON CALIPER
1a
Typical application: Various
Mounting information
TrailingLeading
LH XA8.U2.21
LH XA8.U2.21
RH XA8.U2.21
RH XA8.U2.21
Technical Specifications
Piston Size (mm) 42
Piston Area cm2)
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
27,7
26
15
N/A
6,4
278
95
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
28
10,23
Monobloc
Aluminium
steel
0,96
24
22,68
26
15
N/A
18
278
95
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
28
10,23
Monobloc
Aluminium
steel
0,96
26
50,39
63
25 - 26,5
B13
32 - 35
332 - 355
130
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
62
12,23
2 Pieces
Aluminium
2,95
103,3
P/N XA8.U2.41
2 PISTON CALIPER
Typical application: Various
Mounting information
TrailingLeading
LH XA8.U2.41
LH XA8.U2.41
RH XA8.U2.41
RH XA8.U2.41
Technical Specifications
Piston Size (mm) 38
Piston Area (cm2)
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XA2.E7.03/04
4 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XA2.E7.03
RH XA2.E7.04
Technical Specifications
Piston Size (mm) 38
Piston Area (cm2)
42
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
17
1a
P/N XA2.E7.13/14
4 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XA2.E7.13
RH XA2.E7.14
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
36
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
32,67
63
25 - 26,5
B13
32 - 35
332 - 355
130
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
62
12,23
2 Pieces
Aluminium
2,95
66,97
24,75
38
20
B09
24 - 25,4
278 - 313
120
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
53,5
10,25
2 Pieces
Aluminium
Steel
2,15
50,74
40,84
36,5
16
B08
16
278
120
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
40
10
2 Pieces
Aluminium
1,3
51,05
P/N XA3.G2.11/12
4 PISTON CALIPER
Typical application: RALLY
Mounting information
TrailingLeading
LH XA3.G2.11
RH XA3.G2.12
Technical Specifications
Piston Size (mm) 26
Piston Area (cm2)
30
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XA4.10.01/02/03/04
4 PISTON CALIPER
Typical application: F3
Mounting information
TrailingLeading
LH XA4.10.01
LH XA4.10.03
RH XA4.10.02
RH XA4.10.04
Technical Specifications
Piston Size (mm) 34
Piston Area (cm2)
38
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
18
P/N XA5.T0.03/04
4 PISTON CALIPER
1a
Typical application: RALLY
Mounting information
TrailingLeading
LH XA5.T0.03
RH XA5.T0.04
Technical Specifications
Piston Size (mm) 38
Piston Area (cm2)
44
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
53,09
Mounting Offset (mm)
60,9
Mounting Hole Dia. (mm)
17,5
Caliper Body
B18 - B19
Caliper Material
28 - 30 - 32
Piston Insert
300 - 355
Weight (kg)
180
Fluid Capacity
42
12,23
Monobloc
Aluminium
Steel
2,66
95,56
32,67
63
22
B13
32
332 - 355
130
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
62
12,23
2 Pieces
Aluminium
Steel
2,95
57,17
34,49
36,3
16
B10
18
278
120
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
40
10,23
Monobloc
Aluminium
1 ,21
43
P/N XA6.H7.13/14
4 PISTON CALIPER
Typical application: Grand AM
Mounting information
TrailingLeading
LH XA6.H7.13
RH XA6.H7.14
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
36
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XA6.S0.01/02/03/04
4 PISTON CALIPER
Typical application: F3
Mounting information
TrailingLeading
LH XA6.S0.01
LH XA6.S0.03
RH XA6.S0.02
RH XA6.S0.04
Technical Specifications
Piston Size (mm) 30
Piston Area (cm2)
36
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
19
1a
P/N XA6.S0.21/22/23/24
4 PISTON CALIPER
Typical application: F3 HRB version
Mounting information
TrailingLeading
LH XA6.S0.21
LH XA6.S0.23
RH XA6.S0.22
RH XA6.S0.24
Technical Specifications
Piston Size (mm) 30
Piston Area (cm2)
36
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
34,49
36,3
16
B10
18
278
120
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
40
10,23
Monobloc
Aluminium
1 ,21
43
24,75
38
20
B09
24 - 25,4
295
146 axial
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
30,2
M12x1.5
Monobloc
Aluminium
Steel
1,68
41
32,29
38
20
B09
24 - 25,4
278 - 313
120
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
53,5
10,23
Monobloc
Aluminium
Steel
2,68
54
P/N XA7.G0.11/12
4 PISTON CALIPER
Typical application: RALLY
Mounting information
TrailingLeading
LH XA7.G0.11
RH XA7.G0.12
Technical Specifications
Piston Size (mm) 26
Piston Area (cm2)
30
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XA7.G1.13/14
4 PISTON CALIPER
Typical application: Rear GT
Mounting information
TrailingLeading
LH XA7.G1.13
RH XA7.G1.14
Technical Specifications
Piston Size (mm) 30
Piston Area (cm2)
34
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
20
P/N XA8.30.13/14
4 PISTON CALIPER
1a
Typical application: GT
Mounting information
TrailingLeading
LH XA8.30.13
RH XA8.30.14
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
36
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
32,67
63
26,5
B18
28 - 32
332 - 355
130
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
62
12,23
Monobloc
Aluminium
Steel
2,48
58
45,49
63
26,5
B13
28 - 32
332 - 355
180
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Steel
2,38
58
45,49
Mounting Offset (mm)
78,5
Mounting Hole Dia. (mm)
17,5
Caliper Body
B18 - B19
Caliper Material
25,4 - 28 - 30 - 32
Piston Insert
300 - 355
Weight (kg)
180
Fluid Capacity
42
12,23
Monobloc
Aluminium
Steel
2,1
57
P/N XA8.30.51/52/53/54
4 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XA8.30.51
LH XA8.30.53
RH XA8.30.52
RH XA8.30.54
Technical Specifications
Piston Size (mm) 36
Piston Area (cm2)
40
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XA9.Y6.53/54
4 PISTON CALIPER
Typical application: RALLY
Mounting information
TrailingLeading
LH XA9.Y6.53
RH XA9.Y6.54
Technical Specifications
Piston Size (mm) 36
Piston Area (cm2)
40
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
21
1a
P/N XB0.77.03/04
4 PISTON CALIPER
Typical application: NASCAR
Mounting information
TrailingLeading
LH XB0.77.03
RH XB0.77.04
Technical Specifications
Piston Size (mm) 38
Piston Area (cm2)
42
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
50,39
Mounting Offset (mm)
65
Mounting Hole Dia. (mm)
20
Caliper Body
B18
Caliper Material
28 - 30 - 32
Piston Insert
311 - 328
Weight (kg)
180
Fluid Capacity
42
12,23
2 Pieces
Aluminium
Steel
2,62
84,5
32,67
63
26,5
B18
28 - 32
332 - 355
130
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
62
12,23
Monobloc
Aluminium
Steel
2,35
58
32,67
63
26,5
B13
28 - 32
332 - 355
180
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Steel
2,33
69
P/N XB0.L2.13/14
4 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XB0.L2.13
RH XB0.L2.14
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
36
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XB0.L2.53/54
4 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XB0.L2.53
RH XB0.L2.54
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
36
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
22
P/N XB1.05.11/12
4 PISTON CALIPER
1a
Typical application: GT
Mounting information
TrailingLeading
LH XB1.05.11
RH XB1.05.12
Technical Specifications
Piston Size (mm) 38
Piston Area (cm2)
42
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
50,39
65
25
B18
32 - 35
355 - 380
190
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
2 Pieces
Aluminium
Steel
3,18
106
55,54
65 - 77
20
B18 - B19
32 - 35
328 - 355
130
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
56,5
12,23
2 Pieces
Aluminium
Steel
3,45
80,8
55,54
65 - 77
20
B18 - B19
28 - 32
328 - 355
130
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
55
12,23
2 Pieces
Aluminium
Steel
3,4
80,8
P/N XB1.E7.01/02/03/04
4 PISTON CALIPER
Typical application: TRACK DAY
Mounting information
TrailingLeading
LH XB1.E7.01
LH XB1.E7.03
RH XB1.E7.02
RH XB1.E7.04
Technical Specifications
Piston Size (mm) 40
Piston Area (cm2)
44
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XB1.E7.11/12/13/14
4 PISTON CALIPER
Typical application: TRACK DAY
Mounting information
TrailingLeading
LH XB1.E7.11
LH XB1.E7.13
RH XB1.E7.12
RH XB1.E7.14
Technical Specifications
Piston Size (mm) 40
Piston Area (cm2)
44
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
23
1a
P/N XB1.E7.21/22/23/24
4 PISTON CALIPER
Typical application: TRACK DAY
Mounting information
TrailingLeading
LH XB1.E7.21
LH XB1.E7.23
RH XB1.E7.22
RH XB1.E7.24
Technical Specifications
Piston Size (mm) 36
Piston Area (cm2)
40
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
45,49
65 - 77
20
B18 - B19
28 - 32
328 - 355
130
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
55
12,23
2 Pieces
Aluminium
Steel
3,47
66
45,49
65 - 77
20
B18 - B19
32 - 35
328 - 355
130
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
56,5
12,23
2 Pieces
Aluminium
Steel
3,5
66
49,13
78,5
29
B24
32 - 35
355 - 380
210
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Titanium
3,1
115,4
P/N XB1.E7.31/32/33/34
4 PISTON CALIPER
Typical application: TRACK DAY
Mounting information
TrailingLeading
LH XB1.E7.31
LH XB1.E7.33
RH XB1.E7.32
RH XB1.E7.34
Technical Specifications
Piston Size (mm) 36
Piston Area (cm2)
40
Pad Area (cm2)
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XA4.F1.01/02
6 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XA4.F1.01
RH XA4.F1.02
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
24
P/N XA4.F1.11/12
6 PISTON CALIPER
1a
Typical application: GT
Mounting information
TrailingLeading
LH XA4.F1.11
RH XA4.F1.12
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
49,13
71
31,5
164C-C
37
355 - 380
210
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Titanium
3,1
120,3
49,13
Mounting Offset (mm)
78,5
Mounting Hole Dia. (mm)
22 - 25 C-C
Caliper Body
B24
Caliper Material
25 - 32
Piston Insert
355 - 380
355 C-C - 380 C-C
Weight (kg)
210
Fluid Capacity
42
10,23
Monobloc
Aluminium
Titanium
46,8
63
23 - 24
155C-C
26 - 28
278
152
51,6
10,23
Monobloc
Aluminium
Titanium
1,85
77,23
P/N XA5.C2.01/02
6 PISTON CALIPER
Typical application: GT Narrow
Mounting information
TrailingLeading
LH XA5.C2.01
RH XA5.C2.02
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
2,57
81,07
P/N XA5.E5.01/02/03/04
6 PISTON CALIPER
Typical application: GP2
Mounting information
TrailingLeading
LH XA5.E5.01
LH XA5.E5.03
RH XA5.E5.02
RH XA5.E5.04
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
36
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
25
1a
P/N XA6.61.01/02/03/04
6 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XA6.61.01
LH XA6.61.03
RH XA6.61.02
RH XA6.61.04
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
49,13
78,5
25 - 26,5
B24
32 - 35
355 - 380
210
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Steel
2,98
102
49,13
78,5
25 - 26,5
B24
32 - 35
355 - 380
210
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Steel
2,98
102
49,13
78,5
22
B24
32
355 - 380
210
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Steel
2,97
81,7
P/N XA6.61.21/22/23/24
6 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XA6.61.21
LH XA6.61.23
RH XA6.61.22
RH XA6.61.24
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XA6.H7.01/02
6 PISTON CALIPER
Typical application: Grand AM
Mounting information
TrailingLeading
LH XA6.H7.01
RH XA6.H7.02
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
26
P/N XA8.31.01/02
6 PISTON CALIPER
1a
Typical application: GT CARBON
Mounting information
TrailingLeading
LH XA8.31.01
RH XA8.31.02
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
49,13
Mounting Offset (mm)
80
Mounting Hole Dia. (mm)
31,5 C-C
Caliper Body
-
Caliper Material
35 C-C
Piston Insert
355 C-C - 390 C-C
Weight (kg)
210
Fluid Capacity
42
12,23
Monobloc
Aluminium
Titanium
2,44
121
49,13
78,5
29
B24
32 - 35
355 - 390
210
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Titanium
2,44
116
49,13
Mounting Offset (mm)
80
Mounting Hole Dia. (mm)
31,5 C-C
Caliper Body
-
Caliper Material
35 C-C
Piston Insert
355 C-C - 390 C-C
Weight (kg)
210
Fluid Capacity
42
12,23
Monobloc
Aluminium
Titanium
2,5
121
P/N XA8.31.11/12
6 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XA8.31.11
RH XA8.31.12
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XA8.31.21/22
6 PISTON CALIPER
Typical application: GT CARBON
Mounting information
TrailingLeading
LH XA8.31.21
RH XA8.31.22
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
27
1a
P/N XA8.31.31/32
6 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XA8.31.31
RH XA8.31.32
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
49,13
78,5
29
B24
32 - 35
355 - 390
210
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Titanium
2,5
116
49,13
Mounting Offset (mm)
78,5
Mounting Hole Dia. (mm)
26 C-C
Caliper Body
-
Caliper Material
32 C-C
Piston Insert
355 C-C - 380 C-C
Weight (kg)
210
Fluid Capacity
42
10,48
Monobloc
Aluminium
Titanium
2,27
86
49,13
Mounting Offset (mm)
78,5
Mounting Hole Dia. (mm)
26 C-C
Caliper Body
-
Caliper Material
32 C-C
Piston Insert
355 C-C - 380 C-C
Weight (kg)
210
Fluid Capacity
42
12,45
Monobloc
Aluminium
Titanium
2,27
86
P/N XA8.J1.01/02
6 PISTON CALIPER
Typical application: GT CARBON
Mounting information
TrailingLeading
LH XA8.J1.01
RH XA8.J1.02
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XA8.J1.11/12/13/14
6 PISTON CALIPER
Typical application: GT CARBON
Mounting information
TrailingLeading
LH XA8.J1.11
LH XA8.J1.13
RH XA8.J1.12
RH XA8.J1.14
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
28
P/N XA8.Z4.01/02/03/04
6 PISTON CALIPER
1a
Typical application: RALLY Raid
Mounting information
TrailingLeading
LH XA8.Z4.01
LH XA8.Z4.03
RH XA8.Z4.02
RH XA8.Z4.04
Technical Specifications
Piston Size (mm) 30
Piston Area (cm2)
32
Pad Area (cm2)
40
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
55,35
77
18
B22
28 - 30
320 - 328
200
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
41,5
12,23
Monobloc
Aluminium
Titanium
2,7
55,6
49,13
78,5
29
B24
32 - 35
355 - 380
210
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Steel
3,5
116
61,95
75-95
30
B21-B22
35
328 - 345
210
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Steel
3,66
150
P/N XB0.64.01/02
6 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XB0.64.01
RH XB0.64.02
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N XB2.22.11/12
6 PISTON CALIPER
Typical application: TURISMO
Mounting information
TrailingLeading
LH XB2.22.11
RH XB2.22.12
Technical Specifications
Piston Size (mm) 32
Piston Area (cm2)
34
Pad Area (cm2)
42
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
29
1a
P/N XB2.V0.01/02
6 PISTON CALIPER
Typical application: GT
Mounting information
TrailingLeading
LH XB2.V0.01
RH XB2.V0.02
Technical Specifications
Piston Size (mm) 28
Piston Area (cm2)
30
Pad Area (cm2)
38
Pad Thickness (mm)
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
49,13
75-95
30
B21
32 - 35
355 - 390
210
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
42
12,23
Monobloc
Aluminium
Titanium
2,83
120,6
53,4
34,1
17,5
tbd
30 - 32
355 - 370
180
Mounting Offset (mm)
Mounting Hole Dia. (mm)
Caliper Body
Caliper Material
Piston Insert
Weight (kg)
Fluid Capacity
45
12,23
Monobloc
Aluminium
Titanium
2,52
96,13
Piston Size (mm) 36
Piston Area (cm2) 20,35
Mounting Offset (mm)
Pad Area (cm2) 26
Mounting Hole Dia. (mm)
Pad Thickness (mm) 10
Caliper Body
Pad Family -
Caliper Material
Disc Thickness (mm) 26 - 32
Piston Insert
Disc Diameter (mm) 335 -355
Weight (kg)
Mounting Hole Center (mm) 92 Axial
Fluid Capacity
28,5 - 31,5
M10x1.25
M8x1.25
2 Pieces
Aluminium
1,7
20,35
P/N XA5.D6.01/02/03/04
8 PISTON CALIPER
Typical application: RALLY
Mounting information
TrailingLeading
LH XA5.D6.01
LH XA5.D6.03
RH XA5.D6.02
RH XA5.D6.04
Technical Specifications
Piston Size (mm) 26
Piston Area (cm2)
32
Pad Area (cm2)
26
Pad Thickness (mm)
32
Pad Family
Disc Thickness (mm)
Disc Diameter (mm)
Mounting Hole Center (mm)
P/N 22.5882.11/21
HANDBRAKE CALIPER
Typical application: Various
Mounting information
TrailingLeading
LH 22.5882.11
LH 22.5882.11
RH 22.5882.12
RH 22.5882.12
Technical Specifications
30
31
1
b
CALIPERS
DRAWINGS
32
Richard Prince Photography
33
XA6.L6.11/12
2 PISTON
CALIPER
Ø DISC
1
b
316
A
B
C
D
178,4 159,5108,6 104
E
-
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
316
134
20 48,5 4414,6
P/N XA8.U2.01/11/21
2 PISTON
CALIPER
Ø DISC
278
A
B
C
D
162,8 137,695,5 -
E
-
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
278
116,3 6,4 47 39 15
P/N XA8.U2.41
2 PISTON
CALIPER
Ø DISC
278
A
B
C
D
162,8 137,695,5 -
E
-
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
278
34
116,3 18 47 39 15
P/N XA2.E7.03/04
4 PISTON
CALIPER
Ø DISC
A
B
C
D
E
355
202
179 124 123121,6
332
191
170 168 112,5111,5
1b
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
355 - 332 151,7 - 140 32
53
59
26,5
355 - 332 151,7 - 140 35
53
59
25
P/N XA2.E7.13/14
4 PISTON
CALIPER
Ø DISC
A
B
C
D
E
355
202
179 124 123121,6
332
191
170 168 112,5111,5
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
355 - 332 151,7 - 140 32
53
59
26,5
355 - 332 151,7 - 140 35
53
59
25
P/N XA3.G2.11/12
4 PISTON
CALIPER
Ø DISC
313
278
A
B
C
D
E
178,5 157,5154,3 113111,8
161
140 136,8 95,594,3
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
313
135,5 24 - 25,4 45
43
20
278
118,4 24 - 25,4 45
43
20
35
P/N XA4.10.01/02/03/04
4 PISTON
CALIPER
Ø DISC
1b
A
278
B
C
D
E
156 143 14096,3595
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
278
120,4 16 40 39 16
P/N XA5.T0.03/04
4 PISTON
CALIPER
Ø DISC
A
B
355
196
189,5
179,5 176,1143,1
163,3
152 150,7118,1
300 176,6
C
D
E
Ø DISC R
TH W
H TH
DISC
(disc) (pad) PAD
355
151,2 28 - 30 - 32 64
60
17,5
300
124,5 28 - 30 - 32 52,5
48
17,5
P/N XA6.H7.13/14
4 PISTON
CALIPER
Ø DISC
A
B
C
D
E
355
202 179124,5123121,6
332
191
168 112,5 111,5109,6
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
355 151,732535022
332
36
140 32535022
P/N XA6.S0.01/02/03/04
4 PISTON
CALIPER
Ø DISC
278
A
B
C
D
E
156,6 145,5141 96,192,4
1b
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
278
120,4 18 39 37 16
P/N XA6.S0.21/22/23/24
4 PISTON
CALIPER
Ø DISC
278
A
B
C
D
E
156,6 145,5141 96,192,4
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
278
120,4 18 39 37 16
P/N XA7.G0.11/12
4 PISTON
CALIPER
Ø DISC
295
A
B
C
D
E
167,5 159,6154,6 149 146,9
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
295
126,7 24 - 25,4 45
43
20
37
XA7.G1.13/14
4 PISTON
CALIPER
Ø DISC
1b
A
B
C
D
E
313
174,6 158,5150,9136,6111,8
278
157,1
141 133,4 119,194,3
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
313
278
24 - 25,4 45
43
20
117,9 24 - 25,4 45
135
43
20
P/N XA8.30.13/14
4 PISTON
CALIPER
Ø DISC
A
355
199
332
B
C
D
E
177,1 127,2 125,9122,9
187,5 165,6 115,7 114,4111,4
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
355
151,2
28 - 32 53
53
26,5
332
140
28 - 32 53
53
26,5
P/N XA8.30.51/52/53/54
4 PISTON
CALIPER
Ø DISC
A
355
199
332
B
C
D
E
177,1 127,2 125,9122,9
187,5 165,6 115,7 114,4111,4
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
355
151,2
28 - 32 53
53
26,5
332
140
28 - 32 53
53
26,5
38
P/N XA9.Y6.53/54
4 PISTON
CALIPER
Ø DISC
A
B
355
n.a
n.a n.a n.a n.a
C
D
E
300
n.a
n.a n.a n.a n.a
1b
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
355 - 300 152,5 - 126 25,4 52,5
47,7 17,5
355 - 300 152,5 - 126 28
52,5
47,7 17,5
355 - 300 152,5 - 126 30
52,5
47,7 17,5
355 - 300 152,5 - 126 32
52,5
47,7 17,5
XB0.77.03/04
4 PISTON
CALIPER
Ø DISC
A
B
C
D
E
311
n.a. n.a. n.a. n.a.n.a.
328
185
167,7 166,5 112,6108,9
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
311
132,3 28 - 30 - 3253,5
49
20
328
140,5 28 - 30 - 3253,5
49
20
P/N XB0.L2.13/14
4 PISTON
CALIPER
Ø DISC
A
355
n.a n.a n.a n.an.a
B
C
D
E
332
n.a n.a n.a n.an.a
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
355
151,2
28 - 32 53
49
26,5
332
140
28 - 32 53
49
26,5
39
XB0.L2.53/54
4 PISTON
CALIPER
Ø DISC
1b
A
B
C
D
E
332
n.a. n.a. n.a. n.a.n.a.
355
n.a. n.a. n.a. n.a.n.a.
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
332
140
28 - 32 53
49
26,5
355
151,2
28 - 32 53
49
26,5
D
E
XB1.05.11/12
4 PISTON
CALIPER
Ø DISC
A
B
C
355
n.a. n.a. n.a. n.a.n.a.
380
212
192,5189,2 136,5 n.a.
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
355
153,23 32-3553,5 49 25
380
165,5 32-3553,5 49 25
XB1.E7.01/02/03/04
4 PISTON
CALIPER
Ø DISC
A
B
C
D
E
328
n.a. n.a. n.a. n.a.n.a.
355
201
180 176,5 122,3121,5
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
328
139,24 32 - 35 53,5
49
20
355
152,45 32 - 35 53,5
49
20
40
XB1.E7.11/12/13/14
4 PISTON
CALIPER
Ø DISC
A
B
C
D
E
328
n.a. n.a. n.a. n.a.n.a.
355
201
1b
180 176,5 122,3121,5
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
328
139,24 28 - 32 53,5
49
20
355
152,45 28 - 32 53,5
49
20
XB1.E7.21/22/23/24
4 PISTON
CALIPER
Ø DISC
A
B
C
D
E
328
n.a. n.a. n.a. n.a.n.a.
355
201
180 176,5 122,3121,5
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
328
139,24 28 - 32 53,5
49
20
355
152,45 28 - 32 53,5
49
20
XB1.E7.31/32/33/34
4 PISTON
CALIPER
Ø DISC
A
B
C
D
E
328
n.a. n.a. n.a. n.a.n.a.
355
201
180 176,5 122,3121,5
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
328
139,24 32 - 35 53,5
49
20
355
152,45 32 - 35 53,5
49
20
41
P/N XA4.F1.01/02
6 PISTON
CALIPER
1b
Ø DISC
A
380
211,25
B
C
D
E
355
203,1 178,5137,3 124122,5
192 149,8 136,5133,3
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
380
164,5
32 - 35 52,5
52
29
355
152,5
32 - 35 52,5
52
29
P/N XA4.F1.11/12
6 PISTON
CALIPER
Ø DISC
A
B
C
D
E
380
211,25 192 149,8 136,5133,3
355
203,1 178,5137,3 124 122,5
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
380
164,5
37 48 - 52,5 52
31,5
355
152,5
37 48 - 52,5 52
31,5
P/N XA5.C2.01/02
6 PISTON
CALIPER
Ø DISC
380
355
A
213
B
C
D
E
192,3 136,5 134,9132,6
198,5 177 120 119116
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
380
164,5
25 - 32 52,5
52
22
355
152,5
25 - 32 52,5
52
22
380 C-C
164,5
25 - 32 52,5
52
25
355 C-C
152,5
25 - 32 52,5
52
25
42
P/N XA5.E5.01/02/03/04
6 PISTON
CALIPER
Ø DISC
A
278
B
C
D
E
156 154,5140 139 94
1b
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
278
117 26 44 44 24
278
117 28 44 44 23
P/N XA6.61.01/02/03/04
6 PISTON
CALIPER
Ø DISC
A
B
C
D
E
380
212 189,4136,5132,6 -
355
199,5 176,9124120,1 -
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
380
164,5
32 - 35 52,5
52 26,5 - 25
355
152,5
32 - 35 52,5
52 26,5 - 25
P/N XA6.61.21/22/23/24
6 PISTON
CALIPER
Ø DISC
A
B
C
D
E
380 212 189,4 136,5132,6 355 199,5176,9 124 120,1 Ø DISC R
TH W
H
DISC (disc) (pad)
TH
PAD
380
164,5 32 - 35
52,5
52
26,5 - 25
355
152,5 32 - 35
52,5
52
26,5 - 25
43
P/N XA6.H7.01/02
6 PISTON
CALIPER
1b
Ø DISC
A
380
213
355
B
C
D
E
192,3 136,5 134,9132,6
198,5 177 120 119116
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
380
164,5 3252,5 52 22
355
152,5 3252,5 52 22
P/N XA8.31.01/02
6 PISTON
CALIPER
Ø DISC
A
B
C
D
E
390 C-C 221,25194,7182169,9
138,7
355 C-C 198,75 182,2170,7157,4126,2
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
390 C-C 169,5 3552,55231,5
355 C-C 152,5 3552,55231,5
P/N XA8.31.11/12
6 PISTON
CALIPER
Ø DISC
A
B
C
D
E
390
221,25 194,7 182 169,9138,7
355
198,75 182,2 170,7 157,4126,2
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
390
169,5
32 - 35 52,5
52
29
355
152,5
32 - 35 52,5
52
29
44
P/N XA8.31.21/22
6 PISTON
CALIPER
Ø DISC
A
390 C-C
221,25
194,7 182 169,9 138,7
B
C
D
E
355 C-C
198,75
182,2 170,7 157,4 126,2
1b
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
390 C-C
169,5
35
52,5
52
31,5
355 C-C
152,5
35
52,5
52
31,5
P/N XA8.31.31/32
6 PISTON
CALIPER
Ø DISC
A
B
C
D
E
390
221,25194,7182169,9
138,7
355
198,75 182,2170,7157,4126,2
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
390
169,5
32 - 35 52,5
52
29
355
152,5
32 - 35 52,5
52
29
P/N XA8.J1.01/02
6 PISTON
CALIPER
Ø DISC
A
B
C
D
E
380 C-C
211,5
180,7 138,5 135
-
355 C-C
199
168,2 126 122,5
-
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
380 C-C
164,5
32
52,5
52
26
355 C-C
152,5
32
52,5
52
26
45
P/N XA8.J1.11/12/13/14
6 PISTON
CALIPER
1
b
Ø DISC
A
380 C-C
211,5
180,7 138,5 135
B
C
D
E
-
355 C-C
199
168,2 126 122,5
-
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
380 C-C
164,5
32
52,5
52
26
355 C-C
152,5
32
52,5
52
26
P/N XA8.Z4.01/02/03/04
6 PISTON
CALIPER
Ø DISC
A
B
C
D
E
328
n.a. n.a.n.a.n.a.n.a.
320
n.a. n.a.n.a.n.a.n.a.
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
328
137,75 28 - 30 52,5
50
18
320
133,75 28 - 30 52,5
50
18
P/N XB0.64.01/02
6 PISTON
CALIPER
Ø DISC
A
B
C
D
E
355
203,01 178,5137,3 124122,5
380
211,25
192 149,8 136,5133,3
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
355
152,5
32 - 35 52,5
49
29
380
164,5
32 - 35 52,5
49
29
46
P/N XB2.22.11/12
6 PISTON
CALIPER
Ø DISC
A
B
C
D
E
328
n.a. n.a.n.a.n.a.n.a.
345
192 175,3173,5 n.a. n.a.
1b
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
328 133,55 3553,54930
345 141,75 3553,54930
P/N XB2.V0.01/02
6 PISTON
CALIPER
Ø DISC
355
390
A
B
C
D
E
n.a. n.a.n.a.n.a.n.a.
216,04 197,5178,8152,7141,5
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
355
145,8
32 - 35
64
64
30
390
162,8
32 - 35
64
64
30
P/N XA5.D6.01/02/03/04
8 PISTON
CALIPER
Ø DISC
370
355
A
B
C
D
E
207,5 191,3 187 184,5176,2
200
183,8179,5 177 168,7
Ø DISC
R
TH W
H
TH
DISC (disc) (pad) PAD
370
162,4
30 - 32 52,5
50
17,5
355
155
30 - 32 52,5
50
17,5
47
P/N 22.5882.11/21
HANDBRAKE
CALIPER
Ø DISC
1b
A
B
C
D
E
355
201 178,5159,7138,4135
335
191 168,5149,7128,4125
Ø DISC
R
TH W
H TH
DISC (disc) (pad) PAD
355
156
26 - 32
40
38,5
10
335
146
26 - 32
40
38,5
10
48
49
2
DISCS & FIXINGS
50
51
Fixings
OH - Standard fixing with oval holes
R - Round holes fixing
T - Tooth fixing
VENTILATION
PATTERN
OVERALL THICKNESS
GROOVE TYPE
PCD
FLANGE THK
FLANGE INSIDE DIAMETER
FIXING TYPE
INSIDE DIAMETER
2
ANNULUS
AIRGAP
THK
52
DIAMETER
Groove type
P - plain disc
T1 - groove type 1
T3 - groove type 3
T5 - groove type 5
2
T2 - groove type 2: image not available.
T3L - groove type 3 with logo:
image not available.
T5L - groove type 5 with logo
53
P/N
2
54
Inside
Diameter (mm)
diameter
x Th (mm)
(mm)
DRILL
GROOVE Annulus
TYPE
(mm)
Ventilation
(pillar/
vanes)
09.A261.13/23
268x17
200
0
T5 x 4
39
V
09.8386.15
278x16
187,5
0
T1 x 4
45,25
P
09.8386.16
278x16
197,5
0
T1 x 4
40,25
P
09.A261.11/21
278x18
200
0
T5 x 4
39
V
09.A261.30/40
278x18
200
0
T5 x 4
39
V
09.A261.50/60
278x18
200
0
T5 x 4
39
V
08.4695.41
278x6,4
186
50
0
46
SOLID
08.4695.43
278x6,4
187
0
0
45,5
SOLID
X95.50.60
278x6,4
187
60
0
45,5
SOLID
09.5890.10/20
280x25,4
190,5
80
0
44,75
V
09.5890.30/40
280x25,4
190
0
T1 x 4
45
V
09.5890.31/41
280x28
190
0
T1 x 4
45
V
09.9021.31/41
280x28
190
0
T5 x 8
45
60V
09.7277.09/19
295x25,4
205
0
T5L x 8
45
V
09.7277.75/85
295x25,4
204
0
T5L
45,5
V
09.7277.12/22
295x25,5
205
0
T1 x 8
45
V
09.7277.10/20
295x28
190
0
T1 x 8
52,5
V
09.7277.16/26
295x28
204
0
T1 x 8
45,5
V
09.9021.30/40
295x32
190
0
T3
52,5
60V
01.7143.10
300x22
N/A
0
0
47,5
P
09.7277.13/23
300x25,4
195
0
T1 x 8
52,5
V
09.8647.70/80
300x28
195
0
T5L
52,5
V
09.9021.10/20
300x28
195
0
T5 x 5
52,5
60V
09.9021.18/28
300x28
195
0
T2
52,5
60V
09.B500.50/60
300x28
195
0
T5L x 8
52,5
V
09.8647.12/22
300x30
195
0
T5 x 5
52,5
V
09.8647.13/23
300x32
195
0
T5L x8
52,5
V
XA3.33.10/11
304x32
191,8
96
0
56,1
V
09.7277.36/46
313x25,4
224
0
T1 x 8
44,5
V
09.9221.55/65
313x25,4
224
0
T5 x 8
44,5
60V
09.9222.71/81
313x32
225
0
T5 x 10
44
V
01.7813.10
316x20
N/A
0
0
49
P
19.7813.20
316x20
N/A
0
0
49
P
09.5682.50/60
320x28
215
0
T1 x 8
52,5
V
Fixing type
Overall
Fixing Airgap Weight
thickness
holes n. (mm)
(Kg)
(mm)
PCD
(mm)
Flange inside Flange
diameter
Th
(mm)
(mm)
T
-
8,5
1,95
17,5
N/A
171
4,5
round holes 8,5mm
8
6,5
2,7
16,6
176
156
4,5
round holes 8,5mm
8
6,5
2,45
16,5
186
166
4,5
T
-
8,5
2,5
18
N/A
171
4,5
T
-
8,5
2,2
18
N/A
171
4,5
OH 8mmx10mm
8
8,5
2,54
17,5
186
166
4,5
N/A from Brembo
5
0
1,8
6
164
146
6,4
OH 8mmx10mm
5
0
1,8
6
172,5
154
5
OH 8mmx10mm
5
0
1,7
6
172,5
154
5
OH 8mmx10mm
8
14
3,3
25,7
176
155
6
N/A from Brembo
8
14
3,54
25,4
176,8
151
5
N/A from Brembo
8
14
3,9
26,7
176,8
151
5
N/A from Brembo
8
16
4
26,7
176,8
151
5
OH 8mmx10mm
8
14
4,12
25,4
190
166
6
T
-
16,75
3,9
25,4
N/A
175
6
OH 8mmx10mm
8
14
3,94
25,5
190
166
6
OH 8mmx10mm
8
13,75
5,1
26,7
176
154
6
OH 8mmx10mm
8
13,75
4,58
26,7
190
166
6
OH 8mmx10mm
10
16
6,2
31
176
154
8
monolitic disc
-
7,5
6,8
57,2
114,3
N/A
5
OH 8mmx10mm
8
13,75
4,5
25,4
181
160
6
T
-
16
5
28
N/A
146
6
OH 8mmx10mm
8
16
4,99
26,8
181
160
6
OH 8mmx10mm
8
16
5
26,8
181
160
6
T
-
16
4,42
28
N/A
164
6
OH 8mmx10mm
8
16
5,63
27,8
181
160
6
OH 8mmx10mm
8
16
6,22
28,8
181
160
6
N/A from Brembo
-
16
6,4
29,3
176,8
161,2
4,75
OH 8mmx10mm
8
13,75
4,3
26,6
210
187
6
round holes 8,5mm
8
16
3,64
25,1
210
194
4,5
OH 8mmx10mm
10
19,8
4,5
32,5
210
190
6
monolitic disc
-
7
7,9
65,7
100
N/A
6,7
monolitic disc
-
7
7,9
65,7
114,3
N/A
6,7
OH 8mmx10mm
8
16,5
5,2
29,5
200
182
6
2
55
P/N
2
56
Inside
Diameter (mm)
diameter
x Th (mm)
(mm)
DRILL
GROOVE Annulus
TYPE
(mm)
Ventilation
(pillar/
vanes)
09.8356.30/40
320x28
216
0
T5 x 10
52
V
01.7142.10
320x32
N/A
0
0
63,5
P
09.9226.12/22
324x28
216
0
T5 x 10
54
V
09.A882.10/20
326x26
237
0
T5 x 10
44,5
V
01.7812.10
326x30
N/A
0
0
63,5
P
19.7812.20
326x30
N/A
0
0
63,5
P
09.5682.56/66
328x27
233
0
T1 x 8
47,5
V
01.5682.72/82
328x28
220
0
0
54
V
09.8357.11/21
328x28
201
0
T5 x 6
63,5
V
09.9226.10/20
328x28
220
0
T5 x 10
54
V
XA3.41.18/28
328x28
220
0
T2
54
72V
09.8358.70/80
328x30
221
0
T2
53,5
72V
09.5682.53/63
328x32
220
0
T2
54
V
09.9226.39/49
328x32
220
0
T5 x 10
54
V
09.9227.12/22
328x32
200
0
T5 x 12
64
V
09.9227.10/20
328x35
200
0
T5 x 12
64
V
09.9229.10/20
328x35
200
0
T5 x 12
64
72V
09.8667.50/60
330x28
204
0
T3
63
V
09.9306.70/80
330x32
225
0
T3
52,5
72V
09.9306.71/81
330x32
225
0
0
52,5
72V
09.8666.53/63
332x32
225
0
0
53,5
V
09.8666.70/80
332x32
225
0
T3 x 36
53,5
V
09.A465.70/80
332x32
225
0
T5 x 10
53,5
72V
09.5759.36/46
345x28
250
0
T1 x 8
47,5
V
09.9306.12/22
350x28
224
0
T3
63
72V
09.9306.10/20
350x34
214
0
T3
68
72V
09.5759.17/27
355x28
248
0
T1 x 8
53,5
V
09.A996.10/20
355x30
249
0
T5L
53
V
09.B499.10/20
355x30
249
0
T5L x 10
53
V
01.5759.16/26
355x32
248
0
0
53,5
V
09.5683.19/29
355x32
248
0
T5L
53,5
V
09.9306.11/21
355x32
248
0
T3
53,5
72V
09.9306.30/40
355x32
228
0
T5 x 5
63,5
72V
09.9306.31/41
355x32
228
0
T5L x 10
63,5
72V
Fixing type
Overall
Fixing Airgap Weight
thickness
holes n. (mm)
(kg)
(mm)
PCD
(mm)
Flange inside Flange
diameter
Th
(mm)
(mm)
OH 8mmx10mm
12
16,5
5,17
29
200
182
6
monolitic disc
-
13,5
9,7
43,5
114,3
N/A
6,5
OH 8mmx10mm
10
16,5
6,1
29
206
182
6
special fixing
10
16,5
4
27,5
225
202
6
monolitic disc
-
12
10,2
53,7
100
N/A
6,7
monolitic disc
-
12
10,2
53,7
114,3
N/A
6,7
OH 8mmx10mm
10
16,5
4,9
28,5
218
196
6
OH 8mmx10mm
10
16,5
6,9
29
206
184
6
OH 8mmx10mm
12
16,5
6,1
29
184
161
6
OH 8mmx10mm
10
16,5
5,24
29
206
184
6
OH 8mmx10mm
10
16,5
5,65
29
206
184
6
OH 8mmx10mm
10
16,5
6,3
30
206
184
6
OH 8mmx10mm
10
16,5
6,6
33
206
184
8
OH 8mmx10mm
10
16,5
6,4
33
206
184
8
OH 8mmx10mm
12
16,5
7,32
33,5
184
161
8
OH 8mmx10mm
12
16,5
8,44
35
184
161
8
OH 8mmx10mm
12
19
8,3
35
184
161
8
OH 8mmx10mm
10
16,5
7,5
31
188
166
8
OH 8mmx10mm
10
17
6,7
34,5
210
190
8
OH 8mmx10mm
10
17
6,74
34,5
210
190
8
OH 8mmx10mm
10
16,5
6,9
34,5
210
190
8
OH 8mmx10mm
10
16,5
6,8
34,5
210
190
8
T
-
17
6,6
33
N/A
196
7
OH 8mmx10mm
10
17
4,9
29,5
233
209
6
OH 8mmx10mm
10
17
6,6
29,5
206
182
6
OH 8mmx10mm
10
17
9,3
34,8
197
174
8
OH 8mmx10mm
10
17
5,5
29,5
233
209
6
T
-
17
6,2
30
N/A
219
6
T
-
19,25
5,3
30
N/A
219
6
OH 8mmx10mm
10
17
6,9
34,5
233
209
8
T
-
19,75
6,3
32
N/A
219
6
OH 8mmx10mm
10
17
7,43
34,5
233
209
8
OH 8mmx10mm
10
17
8,43
18,5
210
187
8
OH 8mmx10mm
10
17
8,47
18,5
210
187
8
2
57
P/N
2
58
Inside
Diameter (mm)
diameter
x Th (mm)
(mm)
DRILL
GROOVE Annulus
TYPE
(mm)
Ventilation
(pillar/
vanes)
09.9306.50/60
355x32
228
0
T2
52
72V
09.9404.12/22
355x32
234
0
T5 x 10
60,5
72V
09.A026.13/23
355x32
248
0
T5 x 10
53,5
V
09.A027.13/23
355x32
248
0
T5 x 10
53,5
V
09.A465.11/21
355x32
248
0
T3
53,5
72V
09.A465.13/23
355x32
248
0
T5 x 10
53,5
72V
09.B499.50/60
355x32
248
0
T5L x 10
53,5
72V
09.9306.14/24
355x35
248
0
T3
53,5
72V
09.8528.58/68
370x32
266
0
T2
52
72V
09.A009.10/20
370x32
265
0
T2
52,5
72V
09.8528.55/65
370x35
260
0
T1 x 8
55
72V
09.8528.51/61
375x35
260
0
T3
57,5
72V
09.8528.74/84
380x32
275
0
T3
52,5
72V
09.A009.74/84
380x32
275
0
T5 x 10
52,5
72V
09.A464.75/85
380x32
273
0
T3
53,5
72V
09.A464.76/86
380x32
273
0
T5 x 10
53,5
72V
09.8528.12/22
380x34
250
0
T3L
65
72V
09.8528.31/41
380x34
250
0
T5 x 10
65
72V
09.A009.12/22
380x34
250
0
T3
65
72V
09.A464.30/40
380x34
250
0
T5 x 10
65
72V
59.B979.30/40
380x34
250
0
T5L x 10
70
V
09.8528.32/42
380x35
250
0
T5 x 10
65
72V
09.8528.78/88
380x35
275
0
T3
52,5
72V
09.A464.55/65
380x35
273
0
T3
53,5
72V
09.A464.56/66
380x35
273
0
T5 x 10
53,5
72V
59.B979.31/41
390x32
285
0
T5L x 10
52,5
V
59.B979.35/45
390x32
260
0
T5L x 10
65
V
59.B979.34/44
390x34
260
0
T5L x 10
65
V
59.B979.36/46
390x35
260
0
T5L x 10
65
V
Fixing type
Overall
Fixing Airgap Weight
thickness
holes n. (mm)
(kg)
(mm)
PCD
(mm)
Flange inside Flange
diameter
Th
(mm)
(mm)
OH 8mmx10mm
10
17
8,4
34,5
210
187
8
OH 8mmx10mm
10
17
8,14
34,5
219
196
8
OH 8mmx10mm
10
17
7,5
34,5
233
209
8
OH 8mmx10mm
10
20
6,54
34,5
233
209
8
T
-
17
7,23
33
N/A
219
7
T
-
17
7,9
33
N/A
219
7
T
-
19,25
5,99
32
N/A
219
6
OH 8mmx10mm
10
17
8,6
36
233
209
8
OH 8mmx10mm
10
17
7,8
34,5
245
221
8
OH 8mmx10mm
10
20
7,16
34,5
245
221
8
OH 8mmx10mm
10
17
9
36
245
221
8
OH 8mmx10mm
10
17
9,2
36
245
221
8
OH 8mmx10mm
10
17
9,3
34,5
258
234,5
8
OH 8mmx10mm
10
20
7,37
34,5
258
234,5
8
T
-
17
7,95
33
N/A
242
7
T
-
17
8,02
33
N/A
242
7
OH 8mmx10mm
10
17
10,2
35,5
231
207
8
OH 8mmx10mm
10
17
10,27
35,5
231
207
8
OH 8mmx10mm
10
20
8,47
35,5
231
207
8
T
-
17
10,23
35
N/A
217
8
OH 8mmx10mm
10
18
10,17
35,5
231
207
8
OH 8mmx10mm
10
17
10,7
36
231
207
8
OH 8mmx10mm
10
17
9,3
36
258
234,5
8
T
-
17
9,13
34,5
N/A
242
7
T
-
17
9,16
34,5
N/A
242
7
OH 8mmx10mm
10
18
7,84
34,5
268
245
8
T
-
18
9,52
33,5
N/A
227
8
T
-
18
10,49
35
N/A
227
8
T
-
18
10,96
35,5
N/A
227
8
2
59
Oval holes
2
A1.68.3J.103
A1.14.44.103
A1.68.3J.103
A1.68.3J.105
A1.68.3J.105
XA19902 esp A
Round Holes
A1.68.3J.103
A1.68.3J.103
A1.68.3J.103
A1.68.3J.105
XA1.99.03 esp A
60
Heavy Duty
2
Tooth Fixing
Fixing ring P/N
XA6S197
XA6S197
05A46732
05A46734
05A46733
05A46735
05A46735
05A46735
05A46746
05A46730
05A46746
05A46739
A
Disc Diameter (mm)
268
278
295
300
332
355
355
355x32
380
380
380
390
B
Annulus (mm)
39
39
45,5
52,5
53,5
53
53,5
53,5
53,5
65
53,5
65
C
Screw P/N
XA5K051
XA5K051
05877407
05877407
05877407
05877407
05877407
05877407
05877407
05877407
05877407
05877407
D
Fixing screws n.
11
11
15
15
13
15
15
15
19
21
19
21
61
CARBON DISCS
2
P/N
Material
Diameter
(mm)
Th (mm)
Annulus
(mm)
XA6.M3.C3
CER 200
355
32
53
12
2,64
XA6.M3.C4
CER 200
355
32
53
12
2,64
XA6.M3.D3
CER 200
355
35
53
12
2,9
XA6.M3.C2
CER 200
380
32
53
12
2,9
XA6.M3.D2
CER 200
380
35
53
12
3,2
CARBON PADS
P/N
Material
Th (mm)
Annulus (mm)
Weight (Kg)
07.9076.10
CCR 400
25
53
0,32
07.9076.50
CCR 400
26
53
0,33
07.9076.22
CCR 400
26
53
0,36
Carbon Disc
62
Ventilation
Weight (Kg)
holes (mm)
Flange
inside
diameter
(mm)
Flange
th (mm)
Fixing
number
PCD (mm)
Inside
diameter
(mm)
12
225
249
206
22
07.9076.10
07.9076.50
12
225
249
206
22
07.9076.10
07.9076.50
12
225
249
206
22
07.9076.22
12
250
274
231
22
07.9076.10
12
250
274
231
22
07.9076.22
Related
pads
07.9076.50
2
63
2
64
2
65
3
MASTER
CYLINDERS &
RESERVOIRS
66
67
P/N 10.8687.10/13
STANDARD RESERVOIRS
3
P/N 10.8687.14/15
GRAN TOURING RESERVOIRS
68
P/N 10.6815.56/97
SINGLE NUT FIXING MASTER CYLINDER
3
P/N 10.9243.54/96
TWO BOLT FIXING MASTER CYLINDER
69
P/N X97.54.11/16
FRONT PIVOT FIXING MASTER CYLINDER
3
P/N XA2.L2.A7/F7 – XA3.G1.32/45
FRONT PIVOT FIXING WITH VERTICAL BEARING
MASTER CYLINDER
70
P/N XA7.B9.11/13
TWIN MASTER CYLINDER FOR HANDBRAKE
3
XB2.B5.11/15 - A1/A5
FORGED MASTER CYLINDER
ø
16
17,46
19
20,64
22,22
16
17,46
19
20,64
22,22
pushrod
M10x1
3/8"-24UNF
p/n
X B2.B5.11
X B2.B5.12
X B2.B5.13
X B2.B5.14
X B2.B5.15
X B2.B5.A1
X B2.B5.A2
X B2.B5.A3
X B2.B5.A4
X B2.B5.A5
XB2.B5.11/15: pushrod end M10x1
XB2.B5.A1/A5: pushrod end 3/8” - 24UNF
71
XB2.B5.16/20 - A6/B0
FORGED MASTER CYLINDER WITH TRAVEL SENSOR
Travel sensor p/n XB2.B5.90
ø
16
17,46
19
20,64
22,22
16
17,46
19
20,64
22,22
3
pushrod
M10x1
3/8"-24UNF
p/n
X B2.B5.16
X B2.B5.17
X B2.B5.18
X B2.B5.19
X B2.B5.20
X B2.B5.A6
X B2.B5.A7
X B2.B5.A8
X B2.B5.A9
X B2.B5.B0
XB2.B5.16/20: pushrod end M10x1
XB2.B5.A6/B0: pushrod end 3/8” - 24UNF
XB2.E4.A1/A5
FORGED MASTER CYLINDER
ø
16
17
19
20,64
22,22
72
pushrod
3/8"-24UNF
p/n
X B2.E4.A1
X B2.E4.A2
X B2.E4.A3
X B2.E4.A4
X B2.E4.A5
P/N 10.9243.54/96
TWO BOLT FIXING MASTER CYLINDER
3
P/N 10.6815.56/97
SINGLE NUT FIXING MASTER CYLINDER
73
4
PEDAL
BOX
74
75
XB2.E4.30/35
PEDAL BOX
4
Mechanical pedal ratio: 4,5÷5
Suggested master cylinder: XB2.E4.A1/A5 or XB2.B5.A1/A5
XB2.E4.47
THROTTLE PEDAL SENSOR
76
XB2.E5.10
REMOTE ADJUSTER
4
XB2.S0.10
HANDBRAKE
77
5
TYPICAL
BRAKE SYSTEMS
78
UPDATED ON JULY 2014
79
Pads p/n refer to Brembo suggestions
ASTON MARTIN DBRS-9 GTE
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
M6. 28/30/38
1
XA4.F1.01
Right
M6. 28/30/38
1
XA4.F1.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B24.25.340
Left
---
---
---
Right
---
---
---
Left
Ø 332x32 48 vanes
1
09.8666.70
Right
Ø 332x32 48 vanes
1
09.8666.80
Left
---
---
20.8271.30
Right
---
---
20.8271.40
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B13.26.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Alternative: XA8.31.31/32
Alternative: B29.25.340
ASTON MARTIN DBRS-9 (GT3 HOMOLOGATION) ->2011
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
80
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
---
1
CP5260
Right
---
1
CP5260
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B51.25.170
Left
---
---
---
Right
---
---
---
Left
Ø 313x25,4 48 vanes
1
09.7277.36
Right
Ø 313x25,4 48 vanes
1
09.7277.46
Left
P4. 30/36
1
X98.A8.43
Right
P4. 30/36
1
X98.A8.44
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B12.18.170
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Endurance .78/88
ASTON MARTIN DBRS-9 (GT3 HOMOLOGATION) 2012->
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 380x32 72 vanes
1
09.A464.76
Right
Ø 380x32 72 vanes
1
09.A464.86
Disc assemblies:
XB1.88.13/14
Bell: XB1.88.10
Left
M6. 28/30/38
1
XA6.61.21
Right
M6. 28/30/38
1
XA6.61.22
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B24.25.340
Left
---
---
---
Right
---
---
---
Left
Ø 332x32 48 vanes
1
09.A465.70
Right
Ø 332x32 48 vanes
1
09.A465.80
Left
P4. 28/36
1
XB0.L2.53
Right
P4. 28/36
1
XB0.L2.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B13.26.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XB1.88.21/22
Bell: XB1.88.20
ASTON MARTIN DBRS-9 GT4 SPRINT
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 365x32 72 vanes
1
09.A464.11
Right
Ø 365x32 72 vanes
1
09.A464.21
Disc Assemblies:
XA9.14.11/12
Bell: XA9.14.20
Left
---
1
OE
Right
---
1
OE
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B62.15.170
Left
---
---
---
Right
---
---
---
Left
---
---
---
Right
---
---
---
Left
---
---
---
Right
---
---
---
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
5
81
ASTON MARTIN DBRS-9 GT4 ENDURANCE
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
M6. 28/30/38
1
XA6.61.21
Right
M6. 28/30/38
1
XA6.61.22
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B24.25.340
Left
---
---
---
Right
---
---
---
Left
Ø 332x32 48 vanes
1
09.8666.70
Right
Ø 332x32 48 vanes
1
09.8666.80
Left
M4. 28/36
1
20.8271.30
Right
M4. 28/36
1
20.8271.40
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B18.26.340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Till stock clearance
ASTON MARTIN GTE
5
A
FRONT
A
Disc
Disc
Description
Q.ty
Part number
Comments
Left
Ø 380x32
1
09.A464.76
Right
Ø 380x32
1
09.A464.86
Disc assemblies: XB2.L2.11/12
Bell: XB2.L2.10
Left
Ø 380x35
1
09.A464.56
Right
Ø 380x35
1
09.A464.66
B
Caliper
Left
M6. 28/30/38
1
XA8.31.31
Right
M6. 28/30/38
1
XA8.31.32
C
Pad
1 pad
kit
D
Bracket
Brembo Racing Pad RB-340
1
B24.29.340
Disc assemblies: XB2.L2.13/14
Bell: XB2.L2.10
Alternative (sprint):
B24.29.350 Brembo Racing
Pad RB-350
Left
Right
E
REAR
F
G
Disc
Caliper
Pad
Left
Ø 332x32
1
09.A465.70
Right
Ø 332x32
1
09.A465.80
Left
M4. 28/36
1
XB0.L2.63
Right
M4. 28/36
1
XB0.L2.64
1 pad
kit
H
Bracket
Left
M/C
Right
82
M
Front
N
Rear
O
Clutch
Brembo Racing Pad RB-340
1
B13.26.340
Disc assemblies: XB2.L2.21/22
Bell: XB2.L2.20
Alternative:
B13.26.330 Brembo Racing
Pad RB-330
ASTON MARTIN GT3
Description
A
A
FRONT
B
Disc
Disc
Caliper
Q.ty
Part number
Comments
Disc assemblies:
XB1.88.13/14
Bell: XB1.88.10
Disc assemblies:
XB1.88.31/32
Bell: XB1.88.30
Left
Ø 380x32
1
09.A464.76
Right
Ø 380x32
1
09.A464.86
Left
Ø 380x34 (wide)
1
59.B979.12
Right
Ø 380x34 (wide)
1
59.B979.22
Left
M6. 28/30/38
1
XA6.61.21
Right
M6. 28/30/38
1
XA6.61.22
C
Pad
1 pad
C
Pad
1 pad
D
Bracket
Left
E
Disc
Right
F
Caliper
Left
Right
M4. 28/36
G
Pad
1 pad
kit
kit
Brembo Racing Pad RB-340
1
B24.25.340
Brembo Racing Pad RB-340 (wide)
1
B28.25.340
Ø 332x32
1
09.A465.70
Ø 332x32
1
09.A465.80
M4. 28/36
1
XB0.L2.53
1
XB0.L2.54
Alternative (sprint):
B24.25.350 Brembo Racing
Pad RB-350
Alternative (sprint):
B28.25.350 Brembo Racing
Pad RB-350
REAR
Right
Left
1
B13.26.340
Alternative:
B13.26.330 Brembo Racing
Pad RB-330
Description
Q.ty
Part number
Comments
Left
Ø 370x35 72 vanes
1
09.8528.55
Right
Ø 370x35 72 vanes
1
09.8528.65
Left
M6. 28/30/38
1
XA6.61.21
Right
M6. 28/30/38
1
XA6.61.22
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B24.25.340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.9306.11
Right
Ø 355x32 72 vanes
1
09.9306.21
Left
M4. 28/36
1
XA2.E7.13
Right
M4. 28/36
1
XA2.E7.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B13.26.330
Left
---
---
---
Right
---
---
---
kit
H
Bracket
Disc assemblies:
XB1.88.21/22
Bell: XB1.88.20
Brembo Racing Pad RB-340
Left
M/C
Right
M
Front
N
Rear
O
Clutch
---
AUDI R8 GT3
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
5
83
BENTLEY GT3
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 390x35
1
59.B979.36
Right
Ø 390x35
1
59.B979.46
Disc assemblies:
XB3.59.33/34
Bell: XB3.59.30
Left
M6. 28/30/38
1
XB2.V0.01
Right
M6. 28/30/38
1
XB2.V0.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B21.30.340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32
1
09.A465.13
Right
Ø 355x32
1
09.A465.23
Left
M4. 28/36
1
XB0.L2.13
Right
M4. 28/36
1
XB0.L2.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B13.26.340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Alternative:
B21.30.350 Brembo Racing
Pad RB-350
Disc assemblies:
XB3.59.41/42
Bell: XB3.59.40
Alternative:
B13.26.330 Brembo Racing
Pad RB-330
BMW X3 RALLYRAID
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
84
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 320x28 48 vanes
1
09.8356.30
Right
Ø 320x28 48 vanes
1
09.8356.40
Left
M6. 30/32/40
1
XA8.E0.01
Right
M6. 30/32/40
1
XA8.E0.02
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
Left
Ø 320x28 48 vanes
1
09.8356.30
Right
Ø 320X28 48 vanes
1
09.8356.40
Left
M6. 30/32/40
1
XA8.E0.01
Right
M6. 30/32/40
1
XA8.E0.02
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Fixing Bushes: XA1.B6.27
Alternative:
XA8.Z4.01/02/03/04
Fixing Bushes XA1.B6.27
Alternative:
XA8.Z4.01/02/03/04
CHEVROLET CAMARO GS/GTS
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
P4. 38/42
1
XB.105.11
Right
P4. 38/42
1
XB.105.12
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
BRP34-2022.28B
Left
Bracket
2
20.B771.19
Right
---
---
---
Left
Ø 313x25 48 vanes
1
09.7277.55
Right
Ø 313x25 48 vanes
1
09.7277.65
Left
V6 caliper
1
OE
Right
V6 caliper
1
OE
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Bell: 16.B770.27
Bell: 80.1252
CHEVROLET CORVETTE C6 GT3 (OPTIONAL BRAKE SYSTEM)
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x35 72 vanes
1
09.8528.78
Right
Ø 380x35 72 vanes
1
09.8528.88
Left
M6. 28/30/38
1
XA6.61.21
Right
M6. 28/30/38
1
XA6.61.22
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B24.25.340
Left
---
---
---
Right
---
---
---
Left
---
---
---
Right
---
---
---
Left
---
---
---
Right
---
---
---
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
5
85
CHEVROLET CORVETTE C6 SCCA T1
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 355x32 48 vanes
1
09.A026.13
Right
Ø 355x32 48 vanes
1
09.A026.23
Left
P4. 38/42
1
XB.105.11
Right
P4. 38/42
1
XB.105.12
1 pad
---
---
---
kit
Brembo BRP2 Friction Material
1
BRP2-2022.28B
Left
Bracket
2
20.B771.08
Right
---
---
---
Left
---
---
---
Right
---
---
---
Left
---
---
---
Right
---
---
---
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Bell: 16.B770.09
CHEVROLET CORVETTE C6 W.C. GT/ROLEX GT
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
86
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
M6. 28/30/38
1
XA5.C2.01
Right
M6. 28/30/38
1
XA5.C2.02
1 pad
---
---
---
kit
Brembo BRP2 Friction Material
1
BRP2-1980.22B
Left
---
---
---
Right
---
---
---
Left
Ø 328x28 48 vanes
1
09.9226.10
Right
Ø 328x28 48 vanes
1
09.9226.20
Left
P4. 30/34
1
XA4.R7.03
Right
P4. 30/34
1
XA4.R7.04
1 pad
---
---
---
kit
Brembo BRP3 Friction Material
1
BRP3-1697.20B
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Bell: 85.1195
Bell: 90.1226
DODGE VIPER GTE
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 72 vanes
1
09.8528.33
Right
Ø 380x32 72 vanes
1
09.8528.43
Left
M6. 28/30/28
1
XA8.31.31
Right
M6. 28/30/28
1
XA8.31.32
1 pad
---
---
kit
Brembo Racing Pad RB-340
1
Left
---
---
Right
---
---
Left
Ø 328X28 48 vanes
1
09.9226.10
Right
Ø 328X28 48 vanes
1
09.9226.20
Left
M4. 28/36
1
XB0.L2.53
Right
M4. 28/36
1
XB0.L2.54
1 pad
---
---
kit
Brembo Racing Pad RB-330
1
Left
---
---
Right
---
---
M
Front
---
---
N
Rear
---
---
O
Clutch
---
---
Comments
B28.29.340
B13.25.340
DODGE VIPER GT3
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 72 vanes
1
09.8528.33
Right
Ø 380x32 72 vanes
1
09.8528.43
Left
M6. 28/30/28
1
XB0.64.01
Right
M6. 28/30/28
1
XB0.64.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B28.29.340
Left
---
---
---
Right
---
---
---
Left
Ø 328X28 48 vanes
1
09.9226.10
Right
Ø 328X28 48 vanes
1
09.9226.20
Left
M4. 28/36
1
XB0.L2.53
Right
M4. 28/36
1
XB0.L2.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B13.25.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
5
87
F3 2008 - 2011
A
M/C
REAR
FRONT
B
C
Disc
Caliper
Pad
Description
Q.ty
Part number
Comments
Left
Ø 278x18 48 vanes (24 vanes)
1
09.A261.11 (.30)
Right
Ø 278x18 48 vanes (24 vanes)
1
09.A261.21 (.40)
STD assemblies: XA6.S1.15/25
STD bell: XA6.S1.40
LIGHT assemblies: XA8.N7.15/25
LIGHT bell: XA6.S1.70
Left
M4. 30/36
1
XA6.S0.01
Alternative: XA6.S0.21/22
Right
M4. 30/36
1
XA6.S0.02
1 pad
---
---
---
HRB version
Bedded pad kit
kit
Brembo Racing Pad RB-170
1
B10.16.170
707.A469.02
Left
---
---
---
Right
---
---
---
Left
Ø278x18 48 vanes (24 vanes)
1
09.A261.11 (.30)
D
Bracket
E
Disc
Right
Ø 278x18 48 vanes (24 vanes)
1
09.A261.21 (.40)
STD assemblies: XA6.S1.15/25
STD bell: XA6.S1.40
LIGHT assemblies: XA8.N7.15/25
LIGHT bell: XA6.S1.70
F
Caliper
Left
M4. 30/36
1
XA6.S0.03
Alternative: XA6.S0.23/24
Right
M4. 30/36
1
XA6.S0.04
G
Pad
1 pad
---
---
---
HRB version
Bedded pad kit
kit
Brembo Racing Pad RB-170
1
B10.16.170
707.A469.02
Left
---
---
---
Right
H
Bracket
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Description
Q.ty
Part number
Left
Ø 278x18 48 vanes (24 vanes)
1
09.A261.11 (.30)
F3 2012->
FRONT
5
A
Disc
Right
Ø 278x18 48 vanes (24 vanes)
1
09.A261.21 (.40)
B
Caliper
Left
M4. 30/36
1
XA6.S0.01
Trail fitting
Right
M4. 30/36
1
XA6.S0.02
Caliper
Left
M4. 30/36
1
XA6.S0.03
Lead fitting
Right
M4. 30/36
1
XA6.S0.04
Pad
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B10.16.170
Left
---
---
---
Right
---
---
---
B1
C
D
E
REAR
F
F1
Alternative: XA6.S0.23/24
HRB version
Bedded pad kit
707.A469.02
Left
Ø278x18 48 vanes (24 vanes)
1
09.A261.11 (.30)
Right
Ø 278x18 48 vanes (24 vanes)
1
09.A261.21 (.40)
Caliper
Left
M4. 30/36
1
XA6.S0.01
Alternative: XA6.S0.23/24
Trail fitting
Right
M4. 30/36
1
XA6.S0.02
HRB version
Caliper
Left
M4. 30/36
1
XA6.S0.03
Alternative: XA6.S0.23/24
Right
M4. 30/36
1
XA6.S0.04
HRB version
Pad
1 pad
---
---
---
Bedded pad kit
kit
Brembo Racing Pad RB-170
1
B10.16.170
707.A469.02
Left
---
---
---
Right
---
---
---
M
Ø 16 - M10x1 (3/8 24UNF)
1
XA6.S2.11 (A1)
H
M/C
Disc
Alternative: XA6.S0.21/22
HRB version
Lead fitting
G
88
Bracket
Comments
Bracket
N
Ø 17,46 - M10x1 (3/8 24UNF)
1
XA6.S2.12 (A2)
O
Ø 19 - M10x1 (3/8 24UNF)
1
XA6.S2.13 (A3)
P
Ø 20,64 - M10x1 (3/8 24UNF)
1
XA6.S2.14 (A4)
F3 OLD
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 278x16x40 Pillar Cast Iron
1
09.8386.16
Right
Ø 278x16x40 Pillar Cast Iron
1
09.8386.16
Left
P4. 34/38
1
XA4.10.01
Right
P4. 34/38
1
XA4.10.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B08.16.170
Left
---
---
---
Right
---
---
---
Left
Ø 278x16x40 Pillar Cast Iron
1
09.8386.16
Right
Ø 278x16x40 Pillar Cast Iron
1
09.8386.16
Left
P4. 34/38
1
XA4.10.03
Right
P4. 34/38
1
XA4.10.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B08.16.170
Left
---
---
---
Right
---
---
---
M
Front
Brembo 19,05 mm
1
10.9243.74
N
Rear
Brembo 19,05 mm
1
10.9243.74
O
Clutch
Brembo 17,46 mm
1
10.9243.54
Comments
FERRARI 430 BERLINETTA (GT2/GT3 CATEGORY)
Description
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Q.ty
Part number
Comments
Disc assemblies:
XA2.87.33/34
Bell: XA2.87.30
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
M6. 28/30/38
1
XA4.F1.01
Right
M6. 28/30/38
1
XA4.F1.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B24.29.170
Left
---
---
---
Right
---
---
---
Left
Ø 332x32 48 vanes
1
09.8666.70
Right
Ø 332x32 48 vanes
1
09.8666.80
Left
P4. 28/36
1
XA2.E7.13
Right
P4. 28/36
1
XA2.E7.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B13.26.170
Left
---
---
---
Right
---
---
---
M
Front
Brembo 19,05 mm
1
10.9243.74
N
Rear
Brembo 17,46 mm
1
10.9243.54
O
Clutch
Brembo 17,46 mm
1
10.9243.54
5
Disc assemblies:
XA2.87.41/42
Bell: XA2.87.40
89
FERRARI 458 GTE
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x35 72 vanes
1
09.A464.30
Right
Ø 380x35 72 vanes
1
09.A464.40
Left
M6. 28/30/38
1
XA8.31.31
Right
M6. 28/30/38
1
XA8.31.32
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B28.29.340
Left
---
---
---
Right
---
---
---
Left
Ø 332x32 72 vanes
1
09.A465.70
Right
Ø 332x32 72 vanes
1
09.A465.80
Left
M4. 28/36
1
XB0.L2.13
Right
M4. 28/36
1
XB0.L2.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B13.26.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
FERRARI 458 GT3 SPRINT
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
90
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x34 72 vanes
1
09.8528.31
Right
Ø 380x34 72 vanes
1
09.8528.41
Left
M6. 28/30/38
1
XA6.61.21
Right
M6. 28/30/38
1
XA6.61.22
1 pad
---
---
---
kit
Brembo Racing Pad RB-340/350
1
B28.25.340/350
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.A465.13
Right
Ø 355x32 72 vanes
1
09.A465.23
Left
M4. 28/36
1
XB0.L2.13
Right
M4. 28/36
1
XB0.L2.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B13.26.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
FERRARI 458 GT3 ENDURANCE
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x34 72 vanes
1
09.8528.31
Right
Ø 380x34 72 vanes
1
09.8528.41
Left
M6. 28/30/38
1
XA8.31.31
Right
M6. 28/30/38
1
XA8.31.32
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B28.29.340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.A465.13
Right
Ø 355x32 72 vanes
1
09.A465.23
Left
M4. 28/36
1
XB0.L2.13
Right
M4. 28/36
1
XB0.L2.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B13.26.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
FIAT PUNTO S1600 GRAVEL
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 300x25,4 48 vanes
1
09.7277.13
Right
Ø 300x25,4 48 vanes
1
09.7277.23
Left
M4. 36/42
1
XA0.80.43
Right
M4. 36/42
1
XA0.80.44
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B13.16.170
Left
---
---
---
Right
---
---
---
Left
Ø 278x6,5
1
X95.50.60
Right
Ø 278x6,5
1
X95.50.60
Left
P2. 38
1
X97.24.01
Right
P2. 38
1
X97.24.01
1 pad
Ferodo DS2000
4
07.1715.50
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
1
10.6815…
N
Rear
---
1
10.6815…
O
Clutch
---
1
10.6815…
Comments
5
Out of production.
Alternative: XA5.T0.03/04
Out of production.
Alternative: XA8.U2.01
91
FIAT PUNTO S1600 TARMAC
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 355x28
1
09.5759.17
Right
Ø 355x28
1
09.5759.27
Left
M4. 36/42
1
XA0.80.43
Right
M4. 36/42
1
XA0.80.44
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B13.16.170
Left
---
---
---
Right
---
---
---
Left
Ø 278x6,5
1
X95.50.60
Right
Ø 278x6,5
1
X95.50.60
Left
P2. 38
1
X97.24.01
Right
P2. 38
1
X97.24.01
1 pad
Ferodo DS2000
4
07.1715.50
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
1
10.6815…
N
Rear
---
1
10.6815…
O
Clutch
---
1
10.6815…
Comments
Out of production.
Alternative: XA5.T0.03/04
Out of production.
Alternative: XA8.U2.01
FIAT GRANDE PUNTO S2000 GRAVEL
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
92
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 300x28 60 vanes
1
09.9021.18
Right
Ø 300x28 60 vanes
1
09.9021.28
Left
M4. 38/44
1
XA5.09.03
Right
M4. 38/44
1
XA5.09.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
Left
Ø 300x28 60 vanes
1
09.9021.18
Right
Ø 300x28 60 vanes
1
09.9021.28
Left
M4. 38/44
1
XA5.09.03
Right
M4. 38/44
1
XA5.09.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
FIAT GRANDE PUNTO S2000 TARMAC
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 355x32 72 vanes
1
09.9306.50
Right
Ø 355x32 72 vanes
1
09.9306.60
Left
M4. 38/44
1
XA5.09.03
Right
M4. 38/44
1
XA5.09.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B19.17.350
Left
---
---
---
Right
---
---
---
Left
Ø 300x28 60 vanes
1
09.9021.18
Right
Ø 300x28 60 vanes
1
09.9021.28
Left
M4. 38/44
1
XA5.09.03
Right
M4. 38/44
1
XA5.09.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B18.17.350
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
FORD FIESTA S2000 GRAVEL
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 300x25,4
1
XA9.BD.09
Right
Ø 300x25,4
1
XA9.BD.19
Left
M4. 32/38
1
XA9.E3.01
Right
M4. 32/38
1
XA9.E3.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
Left
Ø 300x25,4
1
XA9.BD.09
Right
Ø 300X25,4
1
XA9.BD.19
Left
M4. 32/38
1
XA9.E3.01
Right
M4. 32/38
1
XA9.E3.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
5
Bedded .10/20
Bedded .10/20
93
FORD FIESTA S2000 TARMAC
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 355x30
1
709.A996.10
Right
Ø 355x30
1
709.A996.20
Bedded disc assemblies:
XA2.42.15/25
Bell: XA2.42.10
Left
M4. 32/38
1
XA9.E3.01
Right
M4. 32/38
1
XA9.E3.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B18.17.350
Left
---
---
---
Right
---
---
---
Left
Ø 300x25,4
1
XA9.BD.09
Right
Ø 300X25,4
1
XA9.BD.19
Left
M4. 32/38
1
XA9.E3.01
Right
M4. 32/38
1
XA9.E3.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B18.17.350
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Bedded .10/20
FORD MUSTANG S197 BOSS 302R (GS/GTS/T1)
A
5
FRONT
B
C
D
E
REAR
F
G
M/C
H
94
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
P4. 38/42
1
XB.105.11
Right
P4. 38/42
1
XB.105.12
1 pad
---
---
---
kit
Brembo BRP2 Friction Material
1
BRP2-2022.28B
Left
Bracket
2
20.B771.15
Right
---
---
---
Left
---
---
---
Right
---
---
---
Left
---
---
---
Right
---
---
---
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Bell: 16.B770.21
HONDA CIVIC TYPE R R3 GRAVEL
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 300x25,4
1
09.7277.13
Right
Ø 300x25,4
1
09.7277.23
Left
P4. 36/40
1
XA6.J1.23
Right
P4. 36/40
1
XA6.J1.24
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
Left
Ø 278x6,4
1
08.4695.43
Right
Ø 278x6,4
1
08.4695.43
Left
P2. 38
1
X97.24.01
Right
P2. 38
1
X97.24.01
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Out of production
Out of production.
Alternative: XA8.U2.01
HONDA CIVIC TYPE R R3 TARMAC
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 328x32
1
09.5682.53
Right
Ø 328x32
1
09.5682.63
Alternative with different
slot type 09.9226.39/49
Left
P4. 40/44
1
XA6.J1.03
Right
P4. 40/44
1
XA6.J1.04
1 pad
---
---
---
kit
---
---
Left
---
---
---
Right
---
---
---
Left
Ø 278x6,4
1
08.4695.43
Right
Ø 278x6,4
1
08.4695.43
Left
P2. 38
1
X97.24.01
Right
P2. 38
1
X97.24.01
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Out of production
Out of production.
Alternative: XA8.U2.01
95
5
IMSA T.U.S.C. DAYTONA PROTOTYPE (LMP)
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 CC
1
XA6.M3.C2
Right
Ø 380x32 CC
1
XA6.M3.C2
Left
M6. 28/30/38
1
XA5.C2.01
Right
M6. 28/30/38
1
XA5.C2.02
1 pad
162x25 CC
4
07.9076.10
kit
---
---
---
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 CC
1
XA6.M3.C3
Right
Ø 355x32 CC
1
XA6.M3.C3
Left
M6. 28/30/38
1
XA5.C2.01
Right
M6. 28/30/38
1
XA5.C2.02
1 pad
162x25 CC
4
07.9076.10
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
LAMBORGHINI GALLARDO SUPER TROFEO >2012
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
96
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 375x35 72 vanes
1
09.8528.51
Right
Ø 375x35 72 vanes
1
09.8528.61
Left
M6. 28/30/38
1
XA6.61.01
Right
M6. 28/30/38
1
XA6.61.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B24.25.170
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.9306.11
Right
Ø 355x32 72 vanes
1
09.9306.21
Left
P4. 28/36
1
XA8.30.13
Right
P4. 28/36
1
XA8.30.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B13.26.170
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
MASERATI TROFEO GT4
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 380x35 72 vanes
1
09.8528.78
Right
Ø 380x35 72 vanes
1
09.8528.88
Disc assemblies:
XA8.29.11/12
Bell: XA8.29.13
Left
M6. 28/30/38
1
XA6.61.01
Right
M6. 28/30/38
1
XA6.61.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B24.25.170
Left
---
---
---
Right
---
---
---
Left
Ø 326x26 48 vanes
1
09.A882.10
Right
Ø 326x26 48 vanes
1
09.A882.20
Left
M4. 30/34
1
XA7.G1.13
Right
M4. 30/34
1
XA7.G1.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B09.20.170
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA8.29.31/32
Bell: XA8.29.33
MERCEDES SLS GT3 SPRINT
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
---
---
---
Right
---
---
---
Left
M6. 28/30/38
1
XA6.61.51
Right
M6. 28/30/38
1
XA6.61.52
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B24.25.340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 48 vanes
1
09.A027.13
Right
Ø 355x32 48 vanes
1
09.A027.23
Left
M4. 28/36
1
XA2.E7.13
Right
M4. 28/36
1
XA2.E7.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B13.26.340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
5
97
MERCEDES SLS GT3 ENDURANCE
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x35 72 vanes
1
09.8528.32
Right
Ø 380x35 72 vanes
1
09.8528.42
Left
M6. 28/30/38
1
XA6.61.51
Right
M6. 28/30/38
1
XA6.61.52
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B29.25.340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 48 vanes
1
09.A027.13
Right
Ø 355x32 48 vanes
1
09.A027.23
Left
M4. 28/36
1
XA2.E7.13
Right
M4. 28/36
1
XA2.E7.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B13.26.340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
MITSUBISHI EVO IX GR.N GRAVEL
Description
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
98
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Q.ty
Part number
Comments
Disc assemblies:
XA5.S5.51/52
Bell: XA5.S5.18
Left
Ø 300x30 60 vanes
1
09.8647.12
Right
Ø 300x30 60 vanes
1
09.8647.22
Left
M4. 38/44
1
XA5.T0.03
Right
M4. 38/44
1
XA5.T0.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/330
1
B18.17.170/330
Left
Bracket
1
XA5.S5.43
Right
Bracket
1
XA5.S5.43
Left
Ø 295x25,4 48 vanes
1
09.7277.12
Right
Ø 295x25,4 48 vanes
1
09.7277.22
Left
P4. 26/30
1
XA3.G2.11
Right
P4. 26/30
1
XA3.G2.12
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B09.20.170
Left
Bracket
1
XA5.S5.14
Right
Bracket
1
XA5.S5.14
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA5.S5.23/24
Bell: XA5.S5.26
MITSUBISHI EVO IX GR.N TARMAC
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 355x32 72 vanes
1
09.9306.30
Right
Ø 355x32 72 vanes
1
09.9306.40
Disc assemblies:
XA5.S5.31/32
Bell: XA5.S5.16
Left
M4. 38/44
1
XA5.T0.03
Right
M4. 38/44
1
XA5.T0.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B19.17.350
Left
Bracket
1
XA5.S5.42
Right
Bracket
1
XA5.S5.42
Left
Ø 295x25,4 48 vanes
1
09.7277.12
Right
Ø 295x25,4 48 vanes
1
09.7277.22
Left
P4. 26/30
1
XA3.G2.11
Right
P4. 26/30
1
XA3.G2.12
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B09.20.340
Left
Bracket
1
XA5.S5.14
Right
Bracket
1
XA5.S5.14
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA5.S5.23/24
Bell: XA5.S5.26
MITSUBISHI EVO X GR.N GRAVEL
Description
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Q.ty
Part number
Comments
Disc assemblies:
XA7.G0.21/22
Bell: XA7.G0.18
Left
Ø 300x30 60 vanes
1
09.8647.13
Right
Ø 300x30 60 vanes
1
09.8647.23
Left
M4. 38/44
1
XA5.T0.03
Right
M4. 38/44
1
XA5.T0.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/330
1
B18.17.170/330
Left
Bracket
1
XA7.G0.43
Right
Bracket
1
XA7.G0.43
Left
Ø 295x25,4 48 vanes
1
09.7277.09
Right
Ø 295x25,4 48 vanes
1
09.7277.19
Left
M4. 26/30
1
XA7.G0.11
Right
M4. 26/30
1
XA7.G0.12
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B09.20.170
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
5
Disc assemblies:
XA7.G0.23/24
Bell: XA7.G0.26
99
MITSUBISHI EVO X GR.N TARMAC
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 355x32 72 vanes
1
09.9306.31
Right
Ø 355x32 72 vanes
1
09.9306.41
Disc assemblies:
XA7.G0.31/32
Bell: XA7.G0.16
Left
M4. 38/44
1
XA5.T0.03
Alternative: XA6.S0.21/22
Right
M4. 38/44
1
XA5.T0.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B19.17.350
Left
Bracket
1
XA7.G0.42
Right
Bracket
1
XA7.G0.42
Left
Ø 295x25,4 48 vanes
1
09.7277.09
Right
Ø 295x25,4 48 vanes
1
09.7277.19
Left
M4. 26/30
1
XA7.G0.11
Right
M4. 26/30
1
XA3.G0.12
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B09.20.340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA7.G0.23/24
Bell: XA7.G0.26
MITSUBISHI RALLYRAID
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
100
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 324x28 48 vanes
1
09.9226.12
Right
Ø 324x28 48 vanes
1
09.9226.22
Left
M6. 30/32/40
1
XA3.40.A1
Right
M6. 30/32/40
1
XA3.40.A2
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
Left
Ø 324x28 48 vanes
1
09.9226.12
Right
Ø 324X28 48 vanes
1
09.9226.22
Left
M6. 30/32/40
1
XA3.40.A1
Right
M6. 30/32/40
1
XA3.40.A2
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
Brembo 20,64
1
XA6.C2.33
N
Rear
Brembo 22,22
1
XA6.C2.34
O
Clutch
---
---
---
Comments
Out of production.
Alternative:
XA8.Z4.01/02/03/04
XA5.36.12/23
- Customer car
Out of production.
Alternative:
XA8.Z4.01/02/03/04
NISSAN GT3
A
FRONT
B
C
D
E
Disc
Caliper
Pad
Bracket
Disc
Description
Q.ty
Part number
Left
Ø 380x34
1
09.8528.12
Right
Ø 380x34
1
09.8528.22
Left
M6. 28/30/38
1
XA8.31.31
Right
M6. 28/30/38
1
XA8.31.32
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B28.29.340
Left
---
---
---
Right
---
---
---
---
---
---
Left
M4. 30/30
1
20.A217.31
Right
M4. 30/30
1
20.A217.32
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
Left
Right
REAR
F
G
M/C
H
Caliper
Pad
Bracket
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Alternative (sprint):
B28.29.350 Brembo Racing
Pad RB-350
ORECA FLM-09 (LMPC)
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 CC
1
XA6.M3.C2
Right
Ø 380x32 CC
1
XA6.M3.C2
Left
M6. 28/30/38
1
XA4.F1.01
Right
M6. 28/30/38
1
XA4.F1.02
1 pad
162x26 CC
4
07.9076.22
kit
---
---
---
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 CC
1
XA6.M3.C3
Right
Ø 355x32 CC
1
XA6.M3.C3
Left
M6. 28/30/38
1
XA4.F1.01
Right
M6. 28/30/38
1
XA4.F1.02
1 pad
162x26 CC
4
07.9076.22
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
5
101
PEUGEOT 206 S1600 GRAVEL
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 295x25,4 48 vanes
1
09.7277.12
Right
Ø 295x25,4 48 vanes
1
09.7277.22
Left
M4. 36/42
1
XA0.80.53
Right
M4. 36/42
1
XA0.80.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B12.18.170
Left
---
---
---
Right
---
---
---
Left
Ø 278x6,4
1
08.4695.43
Right
Ø 278x6,4
1
08.4695.43
Left
P2. 38
1
X97.24.01
Right
P2. 38
1
X97.24.01
1 pad
Ferodo DS2000
4
07.1715.50
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
1
10.9243…
N
Rear
---
1
10.9243…
O
Clutch
---
1
10.9243…
Comments
Out of production.
Alternative: XA5.T0.03/04
Out of production.
Alternative: XA8.U2.01
PEUGEOT 206 S1600 TARMAC
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
102
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 345x28 48 vanes
1
09.5759.36
Right
Ø 345x28 48 vanes
1
09.5759.46
Left
M4. 36/42
1
XA0.80.53
Right
M4. 36/42
1
XA0.80.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B12.18.170
Left
---
---
---
Right
---
---
---
Left
Ø 278x6,4
1
08.4695.43
Right
Ø 278x6,4
1
08.4695.43
Left
P2. 38
1
X97.24.01
Right
P2. 38
1
X97.24.01
1 pad
Ferodo DS2000
4
07.1715.50
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
1
10.9243…
N
Rear
---
1
10.9243…
O
Clutch
---
1
10.9243…
Comments
Out of production.
Alternative: XA5.T0.03/04
Out of production.
Alternative: XA8.U2.01
PEUGEOT 207 S2000 GRAVEL
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 295x25,4 48 vanes
1
09.7277.12
Right
Ø 295x25,4 48 vanes
1
09.7277.22
Left
M4. 38/44
1
XA9.Y6.53
Right
M4. 38/44
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
Left
Ø 295x25,4 48 vanes
1
09.7277.12
Right
Ø 295x25,4 48 vanes
1
09.7277.22
Left
M4. 38/44
1
XA9.Y6.53
Right
M4. 38/44
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
PEUGEOT 207 S2000 TARMAC
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 355x32 48 vanes
1
09.A026.13
Right
Ø 355x32 48 vanes
1
09.A026.23
Left
M4. 38/44
1
XA9.Y6.53
Right
M4. 38/44
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B18.17.350
Left
---
---
---
Right
---
---
---
Left
Ø 295x25,4 48 vanes
1
09.7277.12
Right
Ø 295x25,4 48 vanes
1
09.7277.22
Left
M4. 38/44
1
XA9.Y6.53
Right
M4. 38/44
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B26.17.350
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
5
103
PEUGEOT 207 S2000 EVO GRAVEL
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 295x25,4
1
09.7277.75
Right
Ø 295x25,4
1
09.7277.85
Disc assemblies:
XA9.Y6.10/20
Bell: XA9.Y6.01
Left
P4. 36/40
1
XA9.Y6.53
Right
P4. 36/40
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
Left
Ø 295x25,4
1
09.7277.75
Right
Ø 295x25,4
1
09.7277.85
Left
P4. 36/40
1
XA9.Y6.53
Right
P4. 36/40
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA9.Y6.10/20
Bell: XA9.Y6.01
PEUGEOT 207 S2000 EVO TARMAC
Description
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
104
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Q.ty
Part number
Comments
Disc assemblies:
XA9.Y6.30/40
Bell: XA9.Y6.05
Left
Ø 355x32
1
09.5683.19
Right
Ø 355x32
1
09.5683.29
Left
P4. 36/40
1
XA9.Y6.53
Right
P4. 36/40
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B18.17.350
Left
---
---
---
Right
---
---
---
Left
Ø 295x25,4
1
09.7277.75
Right
Ø 295x25,4
1
09.7277.85
Left
P4. 36/40
1
XA9.Y6.53
Right
P4. 36/40
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B26.17.350
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA9.Y6.10/20
Bell: XA9.Y6.01
PEUGEOT 307 WRC GRAVEL
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 295x25,4 48 vanes
1
09.7277.12
Right
Ø 295x25,4 48 vanes
1
09.7277.22
Left
M4. 36/42
1
XA2.E6.G3
Right
M4. 36/42
1
XA2.E6.G4
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
Left
Ø 295x25,4 48 vanes
1
09.7277.12
Right
Ø 295x25,4 48 vanes
1
09.7277.22
Left
M4. 30/36
1
XA2.E6.H3
Right
M4. 30/36
1
XA2.E6.H4
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Alternative: 09.7277.16/26
Out of production
Alternative: 09.7277.16/26
Out of production
PORSCHE 991 RSR (GTE CATEGORY) SPRINT
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 380x32 72 vanes
1
09.A464.76
Right
Ø 380x32 72 vanes
1
09.A464.86
Disc assemblies:
XB3.S2.11/12
Left
M6. 28/30/38
1
XA6.H7.01
Right
M6. 28/30/38
1
XA6.H7.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B24.22.340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 48 vanes
1
09.5883.11
Right
Ø 355x32 48 vanes
1
09.5883.21
Left
M4. 28/36
1
XA8.30.63
Right
M4. 28/36
1
XA8.30.64
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B13.26.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
5
Disc assemblies:
XB3.S2.31/32
105
PORSCHE 991 RSR (GTE CATEGORY) ENDURANCE
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 380x35 72 vanes
1
09.A464.56
Right
Ø 380x35 72 vanes
1
09.A464.66
Disc assemblies:
XB3.S2.13/14
Left
M6.28/30/38
1
XA4.F1.01
Right
M6.28/30/38
1
XA4.F1.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B24.29.340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.A465.13
Right
Ø 355x32 72 vanes
1
09.A465.23
Left
M4. 28/36
1
XB0.L2.63
Right
M4. 28/36
1
XB0.L2.64
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B13.26.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XB3.S2.41/42
PORSCHE 996 CUP (CUP CATEGORY)
Description
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
106
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Q.ty
Part number
Comments
Disc assemblies:
XA4.F2.11/12
Bell: XA4.F2.10
Left
Ø 350x34 72 vanes
1
09.9306.10
Right
Ø 350x34 72 vanes
1
09.9306.20
Left
---
---
---
Right
---
---
---
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
Left
Ø 330x28 72 vanes
1
09.8667.50
Right
Ø 330x28 72 vanes
1
09.8667.60
Left
---
---
---
Right
---
---
---
1 pad
---
---
---
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA4.F2.21/22
Bell: XA4.F2.20
PORSCHE 996 RSR (GTE CATEGORY)
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Disc assemblies:
XA0.74.73/74
Bell: XA0.74.49
Left
M6. 30/32/40
1
XA3.02.31
Right
M6. 30/32/40
1
XA3.02.32
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/340
1
B24.29.170/340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.9306.11
Right
Ø 355x32 72 vanes
1
09.9306.21
Left
P4. 28/36
1
XA2.E7.13
Right
P4. 28/36
1
XA2.E7.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/340
1
B13.26.170/340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Out of production
Disc assemblies:
XA0.74.81/82
Bell: XA0.74.59
PORSCHE 997 CUP (CUP CATEGORY)
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 380x34 72 vanes
1
09.A009.12
Right
Ø 380x34 72 vanes
1
09.A009.22
Disc assemblies:
XA5.R7.11/12
Bell: XA5.R7.10
Left
---
1
O.E.
Right
---
1
O.E.
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B66.19.340
Left
---
---
---
Right
---
---
---
Left
Ø 350x28 72 vanes
1
09.9306.12
Right
Ø 350x28 72 vanes
1
09.9306.22
Left
---
1
O.E.
Right
---
1
O.E.
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
B67.19.340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
5
Disc assemblies:
XA5.R7.21/22
Bell: XA5.R7.20
107
PORSCHE 997 GT3R CUP (GRAND-AM CATEGORY)
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Disc assemblies:
XA6.H7.21/22
Bell: XA6.H7.20
Left
M6. 28/30/38
1
XA6.H7.01
Right
M6. 28/30/38
1
XA6.H7.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B24.22.170
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.9306.11
Right
Ø 355x32 72 vanes
1
09.9306.21
Left
P4. 28/36
1
XA6.H7.13
Right
P4. 28/36
1
XA6.H7.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B13.22.170
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA6.H7.31/32
Bell: XA6.H7.30
PORSCHE 997 GT3R (GT3 CATEGORY) SPRINT
Description
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
108
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Q.ty
Part number
Comments
Disc assemblies:
XA6.C9.11/12
Bell: XA6.C9.10
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
M6. 28/30/38
1
XA6.H7.01
Right
M6. 28/30/38
1
XA6.H7.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/340
1
B24.22.170/340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.A465.11
Right
Ø 355x32 72 vanes
1
09.A465.21
Left
P4. 28/36
1
XA6.H7.13
Right
P4. 28/36
1
XA6.H7.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/340
1
B13.22.170/340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA6.C9.65/66
Bell: XA6.C9.60
PORSCHE 997 GT3R (GT3 CATEGORY) ENDURANCE
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 380x35 72 vanes
1
09.8528.78
Right
Ø 380x35 72 vanes
1
09.8528.88
Disc assemblies:
XA6.C9.13/14
Bell: XA6.C9.10
Left
M6. 28/30/38
1
XB0.64.01
Right
M6. 28/30/38
1
XB0.64.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/340
1
B24.29.170/340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.A465.11
Right
Ø 355x32 72 vanes
1
09.A465.21
Left
P4. 28/36
1
XA8.30.13
Right
P4. 28/36
1
XA8.30.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/340
1
B13.22.170/340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA6.C9.65/66
Bell: XA6.C9.60
PORSCHE 997 RSR (GTE CATEGORY) SPRINT
Description
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Q.ty
Part number
Comments
Disc assemblies:
XA6.C9.11/12
Bell: XA6.C9.10
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
M6. 28/30/38
1
XA6.H7.01
Right
M6. 28/30/38
1
XA6.H7.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/340
1
B24.22.170/340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.A465.11
Right
Ø 355x32 72 vanes
1
09.A465.21
Left
P4. 28/36
1
XA8.30.13
Right
P4. 28/36
1
XA8.30.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/340
1
B13.26.170/340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
5
Disc assemblies:
XA6.C9.65/66
Bell: XA6.C9.60
109
PORSCHE 997 RSR (GTE CATEGORY) ENDURANCE
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 380x35 72 vanes
1
09.8528.78
Right
Ø 380x35 72 vanes
1
09.8528.88
Disc assemblies:
XA6.C9.13/14
Bell: XA6.C9.10
Left
M6. 28/30/38
1
XA4.F1.01
Right
M6. 28/30/38
1
XA4.F1.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/340
1
B24.29.170/340
Left
---
---
---
Right
---
---
---
Left
Ø 355x32 72 vanes
1
09.A465.11
Right
Ø 355x32 72 vanes
1
09.A465.21
Left
P4. 28/36
1
XA8.30.13
Right
P4. 28/36
1
XA8.30.14
1 pad
---
---
---
kit
Brembo Racing Pad RB-170/340
1
B13.26.170/340
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Alternative: XB0.64.01/02
Disc assemblies:
XA6.C9.65/66
Bell: XA6.C9.60
SKODA FABIA S2000 GRAVEL
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
110
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 300x28 60 vanes
1
09.9021.10
Right
Ø 300x28 60 vanes
1
09.9021.20
Left
M4. 38/44 forged
1
XA5.T0.03
Right
M4. 38/44 forged
1
XA5.T0.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
Left
Ø 300x28 60 vanes
1
09.9021.10
Right
Ø 300x28 60 vanes
1
09.9021.20
Left
M4. 36/40 forged
1
XA5.T0.03
Right
M4. 36/40 forged
1
XA5.T0.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
SKODA FABIA S2000 TARMAC
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 355x32 72 vanes
1
09.9306.30
Right
Ø 355x32 72 vanes
1
09.9306.40
Left
M4. 38/44 forged
1
XA5.T0.03
Right
M4. 38/44 forged
1
XA5.T0.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B18.17.350
Left
---
---
----
Right
---
---
---
Left
Ø 300x28 60 vanes
1
09.9021.10
Right
Ø 300x28 60 vanes
1
09.9021.20
Left
M4. 38/44 forged
1
XA5.T0.03
Right
M4. 38/44 forged
1
XA5.T0.04
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B18.17.350
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
SKODA FABIA S2000 EVO GRAVEL
Description
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Q.ty
Part number
Comments
Disc assemblies:
XA9.X4.10/20
Bell: XA9.X4.01
Left
Ø 300x28
1
09.8647.70
Right
Ø 300x28
1
09.8647.80
Left
P4. 36/40
1
XA9.Y6.53
Right
P4. 36/40
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
Left
Ø 300x28
1
09.8647.70
Right
Ø 300X28
1
09.8647.80
Left
P4. 36/40
1
XA9.Y6.53
Right
P4. 36/40
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-330
1
B18.17.330
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
5
Disc assemblies:
XA9.X4.10/20
Bell: XA9.X4.01
111
SKODA FABIA S2000 EVO TARMAC
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Comments
Left
Ø 355x32
1
09.5683.19
Right
Ø 355x32
1
09.5683.29
Disc assemblies:
XA9.X4.30/40
Bell: XA9.X4.05
Left
P4. 36/40
1
XA9.Y6.53
Right
P4. 36/40
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B18.17.350
Left
Airduct
1+1
20.8056.22/23
Right
---
---
---
Left
Ø 300x28
1
09.8647.70
Right
Ø 300X28
1
09.8646.80
Left
P4. 36/40
1
XA9.Y6.53
Right
P4. 36/40
1
XA9.Y6.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-350
1
B18.17.350
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Disc assemblies:
XA9.X4.10/20
Bell: XA9.X4.01
SRT VIPER GTS-R (GTE)
5
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
112
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
M6. 28/30/38
1
XA8.31.31
Right
M6. 28/30/38
1
XA8.31.32
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
BRP34-1980.29B
Left
---
---
---
Right
---
---
---
Left
Ø 328x28 48 vanes
1
09.9226.10
Right
Ø 328x28 48 Vanes
1
09.9226.20
Left
M4. 28/36
1
XB0.L2.53
Right
M4. 28/36
1
XB0.L2.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
BRP34-1697.25B
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
SRT VIPER (GT3)
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 380x32 72 vanes
1
09.8528.74
Right
Ø 380x32 72 vanes
1
09.8528.84
Left
M6. 28/30/38
1
XB0.64.01
Right
M6. 28/30/38
1
XB0.64.02
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
BRP34-1980.29B
Left
---
---
---
Right
---
---
---
Left
Ø 328x28 48 vanes
1
09.9226.10
Right
Ø 328x28 48 vanes
1
09.9226.20
Left
M4. 28/36
1
XB0.L2.53
Right
M4. 28/36
1
XB0.L2.54
1 pad
---
---
---
kit
Brembo Racing Pad RB-340
1
BRP34-1697.25B
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
SUZUKI IGNIS/SWIFT S1600 GRAVEL
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 355x28 48 vanes
1
09.5759.17
Right
Ø 355x28 48 vanes
1
09.5759.27
Left
M4. 36/42
1
XA0.80.43
Right
M4. 36/42
1
XA0.80.44
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B13.16.170
Left
---
---
---
Right
---
---
---
Left
Ø 278x6,5
1
X95.50.60
Right
Ø 278x6,5
1
X95.50.60
Left
P2. 38
1
X97.24.01
Right
P2. 38
1
X97.24.01
1 pad
Ferodo DS2000
4
07.1715.50
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
5
Out of production.
Alternative: XA5.T0.03/04
Out of production.
Alternative: XA8.U2.01
113
SUZUKI IGNIS/SWIFT S1600 TARMAC
A
FRONT
B
C
D
E
REAR
F
G
M/C
H
5
114
Disc
Caliper
Pad
Bracket
Disc
Caliper
Pad
Bracket
Description
Q.ty
Part number
Left
Ø 355x28 48 vanes
1
09.5759.17
Right
Ø 355x28 48 vanes
1
09.5759.27
Left
M4. 36/42
1
XA0.80.43
Right
M4. 36/42
1
XA0.80.44
1 pad
---
---
---
kit
Brembo Racing Pad RB-170
1
B13.16.170
Left
---
---
---
Right
---
---
---
Left
Ø 278x6,5
1
X95.50.60
Right
Ø 278x6,5
1
X95.50.60
Left
P2. 38
1
X97.24.01
Right
P2. 38
1
X97.24.01
1 pad
Ferodo DS2000
4
07.1715.50
kit
---
---
---
Left
---
---
---
Right
---
---
---
M
Front
---
---
---
N
Rear
---
---
---
O
Clutch
---
---
---
Comments
Out of production.
Alternative: XA5.T0.03/04
Out of production.
Alternative: XA8.U2.01
115
6
BRAKE FLUID &
TEMPERATURE
RECORDS
116
117
BRAKE
FLUID
P/N 04.8164.11
LCF 600 PLUS BRAKE FLUID - 500cc
Exclusively for racing use
Brembo Racing LCF 600 plus has been specifically
formulated to provide the highest performance
under all racing conditions:
- an indipendently proven low compressibility at
high temperatures
- a typical dry boiling point of 601°F (316°C)
- a typical wet boiling point of 399°F (204°C)
It even exceeds the requirements of U.S. FMVSS
116 DOT4 specification.
120
100
80
COMPATIBILITY
Compatible with all Brembo Racing Brake Systems.
It can
be mixed
with other DOT3 and DOT4 racing
HTC 64T Racing
Brake
Fluid brake fluids but for maximum performance
advantage, before filling, other types of fluid should
be drained from the brake system to avoid diluting
the flid characteristic.
Brembo HTC 64T Brake Fluid
Brembo
LCF 600 plus must not be used in fluid
Brake Systems containing magnesium parts.
60
Typical Competitor Fluid
40
20
0
0
20
40
60
Pedal Travel (mm)
LCF 600 plus Racing Brake Fluid
120
100
Brembo LCF 600 plus Brake Fluid
80
60
Typical Competitor Fluid
40
20
0
0
20
40
Pedal Travel (mm)
118
60
P/N 04.8164.20
HTC 64T BRAKE FLUID - 500cc
Exclusively for racing use
Brembo Racing HTC 64T plus has been specifically
formulated to provide the highest performance
under all racing conditions:
- an indipendently proven low compressibility at
high temperatures
- a typical dry boiling point of 635°F (335°C)
COMPATIBILITY
Compatible with all Brembo Racing Brake Systems.
It can be mixed with other DOT3 and DOT4 racing
brake fluids but for maximum performance
advantage, before filling, other types of fluid should
HTC
64T
Brake
be drained
from
the Racing
brake system
to Fluid avoid diluting
the flid
characteristic.
120
Brembo HTC 64T plus must not be used in fluid
Brake100
Systems containing magnesium parts.
Brembo HTC 64T Brake Fluid
80
60
Typical Competitor Fluid
40
20
6
0
0
20
40
60
Pedal Travel (mm)
LCF 600 plus Racing Brake Fluid
120
100
Brembo LCF 600 plus Brake Fluid
80
60
Typical Competitor Fluid
40
20
0
0
20
40
Pedal Travel (mm)
60
M-10x100
119
TEMPERATURE
RECORDS
P/N 02.5168.10/12
CALIPER THERMO TAPES
P/N 02.5168.10 02.5168.11 02.5168.12 Temperature Range
From 132°C/270°F to 210°C/410°F
From 88°C/190°F to 127°C/260°F
From 132°C/270°F to 171°C/340°F
P/N 02.5168.20/23/25
SMALLER CALIPER THERMO TAPES
P/N
02.5168.20
02.5168.23
02.5168.25
Temperature Range
From 132°C to 210°C
From 210°C to 260°C
From 350°C to 450°C
P/N 02.5223.10
TEMPERATURE RECORD NOTPAD
6
120
121
7
SPARE PARTS
122
UPDATED ON JULY 2014
123
7
P/N
Description
Pistons
20454803/04/05/06
4 PISTON GT CALIPER
20570177/79
20454813/14/15/16
4 PISTON GT CALIPER
20570172/76
Piston insert
Insert clips
20795810/20/30/40 8 PISTON CART FRONT/REAR CALIPER
20795421/24
20769351/54
05791211/14
20827110/20/30/40
4 PISTON GT CALIPER
20590962/66
20590742/46
05209130/34
X202971/72/73/74
4 PISTON TOURING REAR CALIPER
X202996/97
X906021/22/23/24
4 PISTON GT CALIPER
20546161/91
20546225/28
05209135/38
X906051/52/53/54
4 PISTON GT CALIPER
20546151/71
20546214/16
05209134/36
X906071/72/73/74
4 PISTON GT CALIPER
20546161/91
20546215/18
05209135/38
X906091/92/93/94
4 PISTON GT CALIPER
20546151/71
20546224/26
05209134/36
X934121/22/23/24
8 PISTON CALIPER
20590921/24
20546250/53
05209129/32
X961433/34
4 PISTON CALIPER
20590910/12
20546260/62
X972401
2 PISTON CALIPER
X972404
X972410
2 PISTON CALIPER
X972404
X972421
2 PISTON CALIPER
X972424
X972431
2 PISTON CALIPER
X972434
X972451
2 PISTON CALIPER
X972424
X972461
2 PISTON CALIPER
X972434
X976041/42/43/44
4 PISTON RALLY CALIPER
20590936/20865060
20546266/69
X976081/82/83/84
4 PISTON RALLY CALIPER
20590923/36
20546263/66
X983801/02/03/04
4 PISTON F3 CALIPER
20570187/89
X98A841/42/43/44
4 PISTON CALIPER
20590923/36
20546263/66
05209131/34
X98D213/14
4 PISTON CALIPER
20546152/20546172
20546266/20546268
05209134/05209136
X98D261/62
4 PISTON CALIPER
20546162/20546192
20769327/20769329
05209135/05209138
X99D001/02/03/04
8 PISTON RALLY (LIGHT) CALIPER
X99D040/41
20769351/54
X99D011/12/13/14
8 PISTON RALLY (LIGHT) CALIPER
X99D040/41
20769351/54
05791211/14
X99E801/02/03/04
6 PISTON TRANS AM CALIPER
20546130/40/80
20546264/65/70
05209132/33/37
XA08041/42/43/44
4 PISTON CALIPER
20454040/90
XA08053/54
4 PISTON CALIPER
20454040/90
XA13711/12/13/14
4 PISTON CALIPER
20570136/39
XA1D141/42/43/44
4 PISTON CALIPER
20546162/92
20546225/28
05209135/38
XA23011/12/13/14
4 PISTON LATE MODEL REAR
20570165/67
XA2E501/02/03/04
4 PISTON NASCAR REAR
20865011/13
20769351/53
05791211/13
XA2E511/12/13/14
4 PISTON NASCAR REAR
20865013/15
20769353/55
05791213/15
XA2E513/14
4 PISTON NASCAR REAR
20865013/15
20769353/55
05791213/15
XA2E611/12/13/14
4 PISTON CALIPER
20795446/49
20769366/69
05791216/19
XA2E631/32/33/34
4 PISTON CALIPER
20795443/46
20769363/66
05791213/16
XA2E641/42/43/44 4 PISTON CALIPER (STEEL RADIATORS)
20795446/49
20856456/59
05209134/37
XA2E651/52/53/54
4 PISTON CALIPER
20795446/49
20856456/59
05209134/37
XA2E6A3/A4
4 PISTON CALIPER
20795446/49
20769366/69
05791216/19
XA2E703/04
4 PISTON CALIPER
20A12977/79
XA2E713/14
4 PISTON CALIPER
20A12972/76
124
05209134/38
blanks = components not available.
Seal kits
Pad abutment
Pad abutment screw
Rigid pipe
Bleed screw
105595557/59
20383262/72
A11234137
06431787
05281213
105595552/56
20383262/72
A11234137
06431787
05281213
105595551/54
20726829
05582917
06431743
05281221
105595552/56
20451781
05582916
105595550/52
20451762/63
105595557/60
X906049/50
105595556/58
05281213
X901111/12
05281213
05582916
06431716
05281213
20451795/96
05582916
06431716
05281213
105595557/60
20451795/96
05582916
06431716
05281213
105595556/58
X906049/50
05582916
06431716
05281213
105595551/54
20451785/86
X934129
05281213
105595550/52
20451762/63
X202929/30
05281213
05582917
105595557
05281213
105595557
05281213
105595559
05281213
105595560
05281213
105595559
05281213
105595560
05281213
105595556/60
X947510/20
05281221
105595553/56
X947510/20
05281221
105595556/58
X947510/20
105595553/56
X947510/20
A12041100
105595556/105595558
20451762/20451763
05442461
X900519
05281213
105595557/105595560
20451730
05582970
06431719
05281213
105595551/54
X99D009/10
X99D030
05281213
105595551/54
X99D009/10
X99D030
05281213
105595554/55/59
20451748/49
05582916
X99E811
05281213
105595556/59
20451730
05582916
05281221
105595556/59
20451730
A11234101
05281221
105595556/59
X204610/11
105595557/59
20451780
105595551/53
X947510/20
105595551/53
20451762/63
105595553/55
X983809/12
05281213
05281221
06431799
05281213
X202808
05281213
X983809/12
05281213
05582917
06431739
05281213
20451762/63
05582917
06431739
05281213
105595553/55
20451762/63
05582917
06431739
05281213
105595556/59
20451729
05582916
05281221
105595553/56
20451729
05582916
05281221
105595556/59
20451729
05582916
05281221
105595556/59
20451729
05582916
05281221
105595556/59
20451729
A11234101
05281221
105722445/47
20451781
XA2E720
05281213
105722440/44
20451781
XA2E720
05281213
blanks = components not available.
05582916
7
125
7
P/N
Description
Pistons
Piston insert
Insert clips
XA30211/12
6 PISTON CALIPER
20590973/74/78
X977025 + 20590763/68
05209131/32/36
XA30221/22
6 PISTON CALIPER
20590973/74/78
20546263/64/68
05209131/32/36
XA30231/32
6 PISTON CALIPER
20590973/74/78
20546263/64/68
05209131/32/36
XA30241/42
6 PISTON CALIPER
20590973/74/78
X977025 + 20590763/68
05209131/32/36
XA34091/92/93/94
6 PISTON CALIPER
X989556/57/59
XA34030/31/32
XA340A1/A2/A3/A4
6 PISTON CALIPER
X989556/57/59
XA34030/31/32
05791213/14/18
XA3A401/02/03/04
4 PISTON NASCAR RESTYLING REAR
20590913/15
20546263/65
05209131/33
XA3A441/42/43/44
4 PISTON NASCAR RESTYLING REAR
20590911/13
20546261/63
05209129/31
XA3A481/82/83/84
4 PISTON NASCAR RESTYLING REAR
(SPACERS)
20590910/12
20546260/62
XA3B751/52/53/54
6 PISTON CALIPER
20590973/74/78
20590723/24/28
05209131/32/36
XA3G211/12
4 PISTON CALIPER
20590911/13
20856451/53
05209129/31
XA41001/02/03/04
4 PISTON F3 CALIPER
20570186/88
XA43901/02/03/04
4 PISTON CALIPER
20546162/92
20546225/28
05209135/38
XA46751/52/53/54
4 PISTON CALIPER
20865016/19
20856436/39
05209134/37
XA4C611/12/13/14
4 PISTON CALIPER
20590946/49
20769367/70
05791217/20
XA4D301/02/03/04
4 PISTON CALIPER
20546161/91
20546225/28
05209135/38
XA4F101/02
6 PISTON CALIPER
20590972/73/77
20590762/63/67
05209130/31/35
XA4F111/12
6 PISTON CALIPER
20590972/73/77
20590762/67 + XA4F110
05209130/31/35
XA4F121/22
6 PISTON CALIPER
20590972/73/77
20590762/63/67
05209130/31/35
XA4F131/32
6 PISTON CALIPER
20590972/73/77
20590762/67 + XA4F110
05209130/31/35
XA50901/02/03/04
4 PISTON CALIPER
20546162/92
20590747/49
05209135/38
XA59001/02/03/04
4 PISTON CALIPER
20865037/40
20769367/70
05791217/20
XA5C201/02
6 PISTON CALIPER
20795442/43/47
20546262/67 + XA5C108
05209130/31/35
XA5D601/02/03/04
8 PISTON CALIPER
X99D040/41
20769351/54
05791211/21
XA5E501/02/03/04
6 PISTON CALIPER
20795442/43/46
20820423/24/27
05209130/31/34
XA5M401/02/03/04
6 PISTON CALIPER
20705052/54/56
XA5T003/04
4 PISTON CALIPER
20865057/60
20852727/30
05209135/38
XA5T101/02/03/04
6 PISTON CALIPER w.c.
X989556/57/59
XA34030/31/32
05791213/14/18
XA66101/02/03/04
6 PISTON CALIPER
20865082/83/87
20856463/64/68
05209130/31/35
XA66121/22/23/24
6 PISTON FORGED CALIPER
20865082/83/87
20856463/64/68
05209130/31/35
XA69403/04
4 PISTON CALIPER
20590946/49
20769367/70
05791217/20
XA6H701/02
6 PISTON CALIPER
20795442/43/47
20856474/75/79
05209130/31/35
XA6H713/14
4 PISTON CALIPER
20590972/76
20856463/67
05209130/34
XA6J103/04
4 PISTON CALIPER
20795437/49
XA6J123/24
4 PISTON CALIPER
20546151/71
XA6L403/04
6 PISTON CALIPER
20865003/04/08
20546283/84/88
05791214/15/19
XA6L611/12
2 PISTON CALIPER
20A12969
XA6S001/02/03/04
4 PISTON F3 CALIPER
20570113/16
XA6S021/22/23/24
4 PISTON F3 CALIPER
20570113/16
XA7G011/12
4 PISTON FORGED CALIPER
20590911/13
20856451/53
05209129/31
XA7G113/14
4 PISTON FORGED CALIPER
20590913/15
20856453/55
05209131/33
126
blanks = components not available.
Seal kits
Pad abutment
Pad abutment screw
Rigid pipe
Bleed screw
105722441/42/46
20726831/32
05582916
05281213
105722441/42/46
20726831/32
05582916
05281213
105722441/42/46
20726831/32
05582916
05281213
105722441/42/46
20726831/32
05582916
05281213
105595553/54/58
20726852
105595553/54/58
20726852/53
05582917
105595553/55
20451762/63
05582917
06431709
05281213
105595551/53
20451762/63
05582917
06431709
05281213
105595550/52
20451762/63
05582917
06431708
05281213
105595553/54/58
20726855/56/57
A11244099
105595551/53
20451762/63
X202929/30
05281213
105722443/45
X947510/20
XA41009/10
05281213
105595557/60
20451780
X202808
05281213
105595556/59
20451762/63
06431798
05281213
105595557/60
20726858/74/75
105595517/20
20451795/96
105722440/41/45
20726831/32
05582917
05281213
105722440/41/45
20726831/32
05582917
05281213
105722440/41/45
20726831/32
05582916
05281213
105722440/41/45
20726831/32
05582916
05281213
105595557/60
20451780
05281213
105595557/60
20726878/79
05281213
105722440/41/45
20726926
105595551/54
X99D009/10
105595552/53/56
20726865/66/67
05281221
05582916
05281221
05281213
A11241064
05281213
X934509
05582916
05281213
05281213
05281213
05769141/43/45
06431797
05281213
06879214
05281213
105595557/60
20451745
105595553/54/58
20726852/53
05582917
105722440/41/45
XA66113
05582916
105722440/41/45
20726863/64
105722445/48
20726884/85
105722440/41/45
20726926
05582916
105722440/44
20451781
05582916
05769146/48
20451750
105595516/18
20451767
05281228
105722442/43/47
20726858/81
05281213
105595516
20451767
05281228
105722441/44
20726836
XA6S007/08
05281213
105722441/44
20726836
XA6S007/08
05281213
105595551/53
20726891
105595553/55
20726891
blanks = components not available.
05281213
05281221
XA66110/11
05281213
XA66111
05281213
05281213
05582917
7
05281213
XA2E720
05281213
06451879
05281213
05281228
05281228
127
P/N
Description
Pistons
Piston insert
Insert clips
XA83013/14
4 PISTON FORGED CALIPER
20795411/15
20852722/26
05209130/34
XA83051/52/53/54
4 PISTON FORGED CALIPER
20795415/17
20852722/26
05209134/36
XA83101/02
NEW 6 PISTON GT CALIPER
20590972/73/77
XA4F110 + 20590762/67
05209130/31/35
XA83111/12
NEW 6 PISTON GT CALIPER
20590972/73/77
20546262/63/67
05209130/31/35
XA83121/22
NEW 6 PISTON GT CALIPER
20590972/73/77
XA4F110 + 20590762/67
05209130/31/35
XA83131/32
NEW 6 PISTON GT CALIPER
20590972/73/77
20546262/63/67
05209130/31/35
XA8E001/02
6PISTON CALIPER
X989556/57/59
XA34030/31/32
05791213/14/18
XA8J101/02
NEW 6 PISTON CARBON CALIPER
20795422/23/27
XA8E808 + 20769363/67
05791212/13/17
XA8J111/12/13/14
NEW 6 PISTON CARBON CALIPER +
VALVE
20795422/23/27
XA8E808 + 20769363/67
05791212/13/17
XA8U201
2 PISTON FORGED CALIPER
20865017
20856457
05209135
XA8U211
2 PISTON FORGED CALIPER
20865018
20856458
05209136
XA8U221
2 PISTON FORGED CALIPER
20865019
20856459
05209137
XA8U241
2 PISTON FORGED CALIPER
20865017
XA8Z401/02/03/04
6 PISTON CALIPER
X989556/57/59
20800722/23/27
05209131/32/36
XA9E301/02
4 PISTON CALIPER
20865054/57
20546253/56
05209132/35
XA9Y653/54
4 PISTON CALIPER
20865056/58
20590726/28
05209134/36
XB06401/02
6 PISTON CALIPER
20590972/73/77
20856452/53/57
05209130/31/35
XB07703/04
4 PISTON CALIPER
20865017/20
XA37709/10
05209135/38
XB0L213/14
4 PISTON FORGED CALIPER
20795411/15
20852722/26
05209130/34
XB0L253/54
4 PISTON CALIPER
20795411/15
20852722/26
05209130/34
XB10511/12
4 PISTON CALIPER
20795416/18
20B68537/39
05209135/37
XB1E701/02/03/04
4 PISTON CALIPER
20795428/30
20B68538/40
05209136/38
XB1E711/12/13/14
4 PISTON CALIPER
20795428/30
20B68538/40
05209136/38
XB1E721/22/23/24
4 PISTON CALIPER
20795426/28
20B68536/38
05209134/36
XB1E731/32/33/34
4 PISTON CALIPER
20795426/28
20B68536/38
05209134/36
XB22211/12
6 PISTON CALIPER
20590909/74/75
20856444/45/49
05209132/33/37
XB2H711/12
4 PISTON CALIPER
20865056/58
20B68556/58
05209134/36
XB2V001/02
6 PISTON CALIPER
20590972/73/77
20820423/24/28
05209130/31/35
XB35801/02
4 PISTON CALIPER
20865054/57
20546253/56
05209132/35
7
128
blanks = components not available.
Seal kits
Pad abutment
105722440/44
Pad abutment screw
Rigid pipe
Bleed screw
20726886
XA83010
05281213
105722444/46
20726886
XA83010
05281213
105722440/41/45
20451705/37
05281213
105722440/41/45
20451705/37
052812 13
105722440/41/45
20451705
05281213
105722440/41/45
20451705
05281213
105595553/54/58
20726852/53
105722440/41/45
20726893/97
05281213
105722440/41/45
20726893/97
X990352
05582917
05281221
105595557
05281213
105595558
05281213
105595559
05281213
105595557
05281213
105595553/54/58
20726852
A11244100
05281221
105722442/45
20451706/24
05281221
105595556/58
20451706/24
05281213
105722440/41/45
20726831/32
05582917
05281228
105595557/60
20451762/63
A12041100
05281213
105722440/44
20726886
A12041100
05281228
105722440/44
20726886
05582917
XA83010
05281213
105722445/47
20726888/89
05582917
06431759
05281213
105722446/48
20B33108
05582916
06451827
05281213
105722446/48
20B33108
05582916
06451827
05281213
105722444/46
20B33108
05582916
06451827
05281213
105722444/46
20B33108
05582916
06451827
05281213
105595554/55/59
20451758/59
05582917
06451851
05281213
105595556/58
20726967
05442461
05281221
105722440/41/45
20451700
XA5K050
05281213
105722442/45
20451706/24
05582917
05281221
7
blanks = components not available.
129
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
130
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
131
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
132
Brembo S.p.A. accepts no responsibility for any differences between the codes, types, measurements, quantities, colours,
images and/or other information provided by us and the actual ones.
BREMBO RACING
BRAKE SYSTEMS
2015-2016
Via Brembo 25
24035 Curno (BG) - Italy
Tel.: +39 035 605 1111
Fax: +39 035 605 2766
E-mail: bremboracing@brembo.it
BREMBO RACING BRAKE SYSTEMS 2015-2016
BREMBO S.p.A.