download PDF file

The first address for
laboratory instruments
Stirring, heating and controlling using the SLR
SLR
In addition to fast or temperature controlled heating, a lot of applications also require liquids to be
stirred. Using our laboratory stirrer SLR with heating, the process of mixing liquids can be selected
from careful to intense, and the device can also be used for speedy heating up or controlled temperature adaptation.
Technical data
Ordering information
Heating function
heating power (kW)
0.9
heated zone (mm)
Ø 155
max. hot plates temperature (°C)
approx. 550
min. time to boiling point 1 l H2O* (min) approx. 15
temperature sensor connector
yes, Pt 1000
setting accuracy with temperature
1
sensor (°C)
controlling accuracy with temperature ± 2 ... 5
sensor** (°C)
hot plate material
glass ceramic
hot plates area (mm)
235 x 235
digital set/actual temperature display yes
(temperature sensor connector)
Stirring function
max. rpm (min-1)
100 - 1100
setting accuracy rpm (min-1)
10
max. stirring volume (l H2O)
10
digital set/actual rpm display
yes
General data
dimensions (L x W x H in mm)
370 x 240 x 85
weight (kg)
approx. 3.8
max. load (kg)
25
admissible ambient temperature (°C) 10 - 40
admissible air humidity (%)
85
protection type
IP 20
protection class
1
housing material
die-cast
cable connector
fixed cable
mains connection (V/Hz)
230 V, 50/60 or
115 V, 50/60
Order No. 230 V
28 541 6373
Order No. 115 V***
28 541 6279
Description
Temperature sensor
stainless steel shaft (V4A), Pt 1000 sensor,
1 m fixed cable with 2 x 4 mm banana plug,
length 170 mm, Ø 4 mm, -30 …+ 200 °C
Temperature sensor
glass shaft, Sensor Pt 1000,
1 m fixed cable with 2 x 4 mm banana plug,
length 250 mm, Ø 6 mm, -30 …+ 200 °C
Stand rod with fixing nut (M8)
stainless steel, Ø 10 mm, length 450 mm
Temperature sensor holder
clamp with extension rod
made of stainless steel, connector
Magnetic stirrer rod set for standard applications / AlNiCo5, circular cross-section, PTFE
coated, 1 piece 15, 20, 30, 40, 50, 60, 70, 80
mm each
Magnetic stirrer ripe for medium volumes
SmCo, circular cross-section, PTFE coated,
5 pieces 9 x 15 mm each
Magnetic stirrer for large volumes
SmCo, elliptic cross-section, PTFE coated,
1 piece 19 x 75 mm each
Compressed-air connector (only SLK)
for use in an aggressive environment
(subsequent installation only by manufacturer)
Compressed-air connector set (only SLK)
Type No.
Order No.
W5791NNHT 28 510 5308
W5780NNHT 28 510 5238
Z 601
28 541 6492
Z 602
28 541 6505
Z 603
28 541 6554
Z 604
28 541 6562
Z 605
28 541 6579
Z 607
28 541 6595
Z 608
28 541 6608
Your distribution partner:
SI Analytics GmbH
Hattenbergstr. 10
55122 Mainz
Germany
Phone+49.(0)6131.66.5111
Fax+49.(0)6131.66.5001
support@si-analytics.com
www.si-analytics.com
SI Analytics is a trademark of Xylem Inc. or one of its subsidiaries.
© 2015 Xylem, Inc. 980 088US January 2015
*measured in 3 l glass beaker at 25 °C ambient temperature and 1 bar air pressure
**depending on liquid quantity, heat capacity,
and ambient temperature
***the above measurement values may deviate
slightly when using the 115 V version
• CE sign
Council Directive 89/336/EMC
(electromagnetic compatibility)
Council Directive 73/23/EMC (low-voltage directive), last modified by the Council Directive
93/68/EMC