GVAD0110 - Seewide

Product datasheet
GVAD0110
Characteristics
auxiliary contact TeSys - 1 NO + 1 NC (fault)
Range of product
GV2L
GV2LE
GV2ME
GV2P
GV3L
GV3P
GV2RT
Product or component type
Auxiliary contact block
Auxiliary contacts operation
Fault signal
Instantaneous
Pole contact composition
1 NO + 1 NC
Connections - terminals
Control circuit: screw clamps terminals 1 cable
1...2.5 mm² - cable stiffness: solid
Control circuit: screw clamps terminals 1 cable
0.75...2.5 mm² - cable stiffness: flexible - without
cable end
Control circuit: screw clamps terminals 2 cable
0.75...1.5 mm² - cable stiffness: flexible - with
cable end
Control circuit: screw clamps terminals 2 cable
1...2.5 mm² - cable stiffness: solid
Control circuit: screw clamps terminals 1 cable
0.75...1.5 mm² - cable stiffness: flexible - with
cable end
Control circuit: screw clamps terminals 2 cable
0.75...2.5 mm² - cable stiffness: flexible - without
cable end
Complementary
Mounting location
Left side
[Ui] rated insulation voltage
300 V - for control circuit - conforming to CSA C22-2 No 14
300 V - for control circuit - conforming to UL 508
690 V - for control circuit - conforming to IEC 60947-1
[Ue] rated operational voltage
110 V DC for control circuit
110...127 V AC for control circuit
230...240 V AC for control circuit
24 V AC for control circuit
24 V DC for control circuit
240 V DC for control circuit
380...415 V AC for control circuit
440 V AC for control circuit
48 V AC for control circuit
48 V DC for control circuit
500 V AC for control circuit
60 V DC for control circuit
690 V AC for control circuit
[Ith] conventional free air thermal current
1 A for control circuit conforming to CSA C22-2 No 14
1 A for control circuit conforming to UL 508
5 A for control circuit conforming to CSA C22-2 No 14
5 A for control circuit conforming to UL 508
6 A for control circuit conforming to IEC 60947-5-1
2.5 A for control circuit conforming to IEC 60947-5-1
Mechanical durability
100000 cycles
Minimum switching current
5 mA for control circuit
Minimum switching voltage
17 V for control circuit
Rated operational power in VA
300 VA at 48 V AC-15 - electrical durability: 100000 cycles - for control circuit
36 VA at 24 V AC-14 - electrical durability: 1000 cycles - for control circuit
400 VA at 690 V AC-15 - electrical durability: 100000 cycles - for control circuit
48 VA at 48 V AC-14 - electrical durability: 1000 cycles - for control circuit
500 VA at 500 V AC-15 - electrical durability: 100000 cycles - for control circuit
650 VA at 440 V AC-15 - electrical durability: 100000 cycles - for control circuit
500 VA at 110...127 V AC-15 - electrical durability: 100000 cycles - for control circuit
720 VA at 230...240 V AC-15 - electrical durability: 100000 cycles - for control circuit
1/2
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Main
850 VA at 380...415 V AC-15 - electrical durability: 100000 cycles - for control circuit
72 VA at 110...127 V AC-14 - electrical durability: 1000 cycles - for control circuit
Rated operational power in W
120 W at 240 V DC-13 - electrical durability: 100000 cycles - for control circuit
140 W at 110 V DC-13 - electrical durability: 100000 cycles - for control circuit
140 W at 24 V DC-13 - electrical durability: 100000 cycles - for control circuit
15 W at 48 V DC-13 - electrical durability: 1000 cycles - for control circuit
180 W at 60 V DC-13 - electrical durability: 100000 cycles - for control circuit
24 W at 24 V DC-13 - electrical durability: 1000 cycles - for control circuit
240 W at 48 V DC-13 - electrical durability: 100000 cycles - for control circuit
9 W at 60 V DC-13 - electrical durability: 1000 cycles - for control circuit
Tightening torque
Control circuit: <= 1.4 N.m - on screw-clamp terminals
Height
89 mm
Width
9.3 mm
Depth
66 mm
Product weight
0.055 kg
Environment
2/2