LED CANOPY LIGHT - LEGACYTM UNIVERSAL SUPERKIT - 2X2 (CRUK UNV) 2x2 Housing Not Included US & Int’l. patents pending. Crossover SuperKits allow you replace many existing 2x2 canopy fixtures (including LSI, Whiteway and Jet-Phillips) without having to know the dimensions of the existing fixture. SMARTEC ENERGY SAVING FEATURES THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature. HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal. LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300K color temperature, 70 CRI (nominal). DRIVE CURRENT - Choice of High Output (HO) or Very High Output (VHO). 2x2 Housing Must be Ordered Separately, if Needed OPTICS / DISTRIBUTION - Symmetrical, which directs light through a glass lens to provide a uniform distribution of light to vertical and horizontal surfaces. DOE LIGHTING FACTS Department of Energy has verified representative product test data and results in accordance with its Lighting Facts Program. Visit www.lightingfacts.com for specific catalog strings. OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a standard flat glass lens. Unit is water-resistant, sealed to an IP67 rating. Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture. PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure. DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output. LSI driver components are fully encased in potting for IP65 moisture resistance. Complies with IEC and FCC standards. Surge protected at 10KV. 0-10 V dimming supplied standard with all drive currents. ADAPTOR PANEL - Die formed galvanized steel, with powder coat finish. OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F) ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input. LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Scenario 1, Location Category C. FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process. DuraGrip withstands extreme weather changes without cracking or peeling. INSTALLATION - Pre-assembled optical unit and mounting panel hinges and fastens to existing fixture housing in place of current door assembly. Driver is pre-mounted to back of CRUK assembly. SHIPPING WEIGHT - 33 pounds. EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance. WARRANTY - Limited 5-year warranty. LISTING - UL listed to UL 1598, UL 8750 and other U.S. and International safety standards. Suitable for wet locations. PHOTOMETRICS - Applications layouts are available upon request. Contact LSI Petroleum Lighting or [email protected] This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements. IP67 wet location Project Name Catalog # Fixture Type 12/09/14 © 2014 LSI INDUSTRIES INC. LED CANOPY LIGHT - LEGACYTM UNIVERSAL SUPERKIT - 2X2 (CRUK UNV) LUMINAIRE ORDERING INFORMATION TYPICAL ORDER EXAMPLE: Prefix CRUK UNV Distribution SC LED HO CW UE WHT Light Source Drive Current Color Temperature Input Voltage Finish LED HO - High Output VHO - Very High Output CW - Cool White UE - Universal Voltage (120-277V) WHT - White BRZ - Bronze BLK - Black CRUK UNV SC - Standard (Universal 2x2) Symmetric Options None 347-480 Volt1 FOOTNOTES: 1- 347V only available in HO drive current. DIMENSIONS 20 3/4” (528 mm) 13/16” (21 mm) 20 3/4” (528 mm) Cool White LIGHT OUTPUT - CRUK UNV Lumens Watts LPW HO - High Output 19,630 150 131 VHO - Very High Output 23,523 196 120 Project Name Catalog # Fixture Type 12/09/14 © 2014 LSI INDUSTRIES INC.
© Copyright 2018 ExploreDoc