Type EM-BAC-MOD-01

PÁGINA PRINCIPAL > Productos > Sistemas de control
> Sistema de control EASYLAB y TCU-LON-II - LABCONTROL > Módulos de expansión
> Type EM-BAC-MOD
Type EM-BAC-MOD-01
BACNET AND MODBUS INTERFACE FOR EASYLAB CONTROLLERS AND
ADAPTER MODULES
Expansion module for EASYLAB fume cupboard controllers, room controllers, extract air controllers, supply air
controllers, and adapter modules, for the integration of rooms or individual volume flow controllers with the
central BMS
Switching between BACnet MS/TP and Modbus RTU
BACnet Standardised Device Profile (Annex L)
Modbus interface with individual data registers
Native BACnet interface by integrating the expansion module with EASYLAB components
Easy retrofitting
Double-stack terminal blocks for the EIA-485 bus
Equipment address and data transfer parameters can be defined
Interface to central BMS
Inicio Contactos Imprint Condiciones de contratación Privacidad Disclaimer
02/03/2015 © TROX España, S.A.
PÁGINA PRINCIPAL > Productos > Sistemas de control
> Sistema de control EASYLAB y TCU-LON-II - LABCONTROL > Módulos de expansión
> Type EM-BAC-MOD
When used on a controller with active room management function (RMF) the module provides also data
points for the entire room, e.g. for total volume flows or consolidated alarms
When used on a single controller: data points for volume flow rate, alarm, damper blade position, or
others
Centralised operating mode default setting, e.g. night-time operation
APPLICATION
Application
Expansion module Type EM-BAC-MOD-01 for the EASYLAB
system
BACnet-MS/TP or Modbus RTU interface to the central BMS
Data points for individual controllers or for the room
Room interface: Default setting of room operating modes within
the EASYLAB system, increase or reduction of the air change
rate, readout of the actual room operating values or evaluated
damper blade positions, consolidated alarms
Controller interface: Operating mode default setting for a single
fume cupboard controller, readout of individual operating values
such as volume flow rates for single controllers, or individual
alarms
Can be used with fume cupboard, supply air, extract air or
differential pressure controller EASYLAB TCU3 and with adapter
module TAM
For use in laboratories, clean rooms in the pharmaceutical and
semiconductor industries, operation theatres, intensive care units,
and offices with very demanding control requirements
Factory mounted or for retrofitting into the EASYLAB base
component casing
Special characteristics
Ready for installation, can be easily connected to the main PCB
Interface for EIA-485 networks BACnet MS/TP and Modbus RTU
BACnet Protocol Revision 12.0
Only standard BACnet objects or Modbus registers are used for
communication
Inicio Contactos Imprint Condiciones de contratación Privacidad Disclaimer
02/03/2015 © TROX España, S.A.
PÁGINA PRINCIPAL > Productos > Sistemas de control
> Sistema de control EASYLAB y TCU-LON-II - LABCONTROL > Módulos de expansión
> Type EM-BAC-MOD
Data interface for an EASYLAB controller or for an EASYLAB room
with different functional profiles
Hardware switch to enter network addresses and communication
parameters (no communication software required)
DESCRIPTION
Parts and characteristics
Microprocessor with setup programme stored in nonvolatile
memory
EIA-485 communication interface
Slide switch to switch between BACnet and Modbus
communication protocols
Two address switches, X and Y, to set equipment addresses 1-99
8-way DIP switches to adjust the communication parameter
Double-stack terminal blocks for the EIA-485 network (simple
wiring)
Two indicator lights indicate communication and errors,
respectively
Connection to update the firmware
EIA-485 terminal resistor that can be activated
Construction features
PCB dimensions and fixing points correspond to the EASYLAB
main PCB and the casing
Fixing with screws
Pin header to connect the module to the main PCB of the TCU3 or
TAM
INFORMACIÓN TÉCNICA
FUNCTION
Inicio Contactos Imprint Condiciones de contratación Privacidad Disclaimer
02/03/2015 © TROX España, S.A.
PÁGINA PRINCIPAL > Productos > Sistemas de control
> Sistema de control EASYLAB y TCU-LON-II - LABCONTROL > Módulos de expansión
> Type EM-BAC-MOD
Functional description
The expansion module EM-BAC-MOD-01 is used to integrate EASYLAB controllers Type TCU3 or
EASYLAB adapter modules Type TAM into a BACnet (MS/TP) network and in this way connect them to
the central BMS.
The BACnet or Modbus interface supports the EASYLAB room operating mode concept. It is possible to
set operating mode defaults in order to control different volume flow rates for daytime and night-time
operation; it is also possible to increase or reduce the air change rate (volume flow rate setpoint
change), e.g. to influence the room temperature.
Using the BACnet or Modbus interface, an individual alarm management system can be set up by
consolidating configurable EASYLAB alarms. The interface also enables the transfer of actual operating
values such as volume flow rates and damper blade position for a controller or for all controllers in a
room.
Inicio Contactos Imprint Condiciones de contratación Privacidad Disclaimer
02/03/2015 © TROX España, S.A.
PÁGINA PRINCIPAL > Productos > Sistemas de control
> Sistema de control EASYLAB y TCU-LON-II - LABCONTROL > Módulos de expansión
> Type EM-BAC-MOD
Inicio Contactos Imprint Condiciones de contratación Privacidad Disclaimer
02/03/2015 © TROX España, S.A.
PÁGINA PRINCIPAL > Productos > Sistemas de control
> Sistema de control EASYLAB y TCU-LON-II - LABCONTROL > Módulos de expansión
> Type EM-BAC-MOD
TECHNICAL DATA
SPECIFICATION TEXT
Expansion module to supplement an EASYLAB base component (controller TCU3 or adapter
module TAM) with a BACnet or Modbus interface to link rooms or individual volume flow controllers to
the central BMS.
The expansion module includes an interface for EIA-485 networks that can be used for BACnet MS/TP
or Modbus RTU (switching), a switch to enter communication parameters, a connection to update the
firmware, and indicator lights.
Special characteristics
Ready for installation, can be easily connected to the main PCB
Interface for EIA-485 networks BACnet MS/TP and Modbus RTU
BACnet Protocol Revision 12.0
Only standard BACnet objects or Modbus registers are used for communication
Data interface for an EASYLAB controller or for an EASYLAB room with different functional profiles
Hardware switch to enter network addresses and communication parameters (no communication
software required)
Technical data
Inicio Contactos Imprint Condiciones de contratación Privacidad Disclaimer
02/03/2015 © TROX España, S.A.
PÁGINA PRINCIPAL > Productos > Sistemas de control
> Sistema de control EASYLAB y TCU-LON-II - LABCONTROL > Módulos de expansión
> Type EM-BAC-MOD
Communication interface: EIA-485 standard
Protokoll: BACnet MS/TP standard rev. 12 or Modbus RTU
Data transmission speeds: BACnet: 9600, 19200, 38400, 76800 baud, Modbus: 9600, 19200,
38400, 57600 baud
Parity checks for data security: none, odd, even
Configurable network addresses: 01 … 99
Operating temperature: 0 to 50 °C
IEC protection class: III (protective extra-low voltage)
Protection level: IP 20
EC conformity: EMC to 2004/108/EG
Data points for a single controller
Volume flow actual and setpoint values
Damper blade position
Operating mode
Alarm/status messages
Total supply air and total extract air actual values (room)
Evaluated damper blade positions for all controllers in a room
Number of controllers
Integration of volume flows
Additional data points for a fume cupboard controller
Operating mode default setting for the fume cupboard controller equipped with the expansion
module
Selection of priority for operating mode default setting
Face velocity actual value and setpoint value (only for fume cupboard controllers with face velocity
transducer, equipment function FH-VS)
Data points for EASYLAB room
Operating mode default setting for the room: Just one data point is required to set the default
operating mode for all controllers in a room
Selection of priority for operating mode default setting (central BMS or room)
Room operating mode
Volume flow rate setpoint change (by the central BMS, for example) for an external temperature or
Inicio Contactos Imprint Condiciones de contratación Privacidad Disclaimer
02/03/2015 © TROX España, S.A.
PÁGINA PRINCIPAL > Productos > Sistemas de control
> Sistema de control EASYLAB y TCU-LON-II - LABCONTROL > Módulos de expansión
> Type EM-BAC-MOD
differential pressure control
Setpoint value switching for differential pressure control: Switching between two differential
pressure setpoint values
Total supply air and total extract air actual values (room)
Evaluated damper blade positions for all controllers in a room
Room differential pressure actual and setpoint values
Room pressure alarm
Number of controllers within the EASYLAB system
Integration of volume flows
Status of the digital inputs and outputs
Configurable consolidated alarm (operating statuses, hardware faults)
ORDER CODE
SERVICIOS TROX
Inicio Contactos Imprint Condiciones de contratación Privacidad Disclaimer
02/03/2015 © TROX España, S.A.
PÁGINA PRINCIPAL > Productos > Sistemas de control
> Sistema de control EASYLAB y TCU-LON-II - LABCONTROL > Módulos de expansión
> Type EM-BAC-MOD
SERVICIOS TROX
BUSQUEDA POR
ARTICULO A-Z
TROX España
TROX EASY PRODUCT
FINDER
Servicios on-line:
TROX Academy
Contactos
Formulario de contacto
Mapa de situación
Ctra. Castellón, Km. 7
Pol. Ind. La Cartuja
E-50720 Zaragoza
Tel: +34 976 50 02 50
Fax + 34 976 50 09 04
Email:trox@trox.es
TOUR DE
COMPETENCE
Líneas teléfonicas de
atención:
Delegaciones comerciales
Contacto
Customer Service
+34 976 50 02 50
Contacto
Condiciones de venta y
garantía
Certificado AENOR
Certificado IQNet
Certificado TÜV
Inicio Contactos Imprint Condiciones de contratación Privacidad Disclaimer
02/03/2015 © TROX España, S.A.