Download (PDF, 643KB) - Novelty Engineering Corporation

Periodical Testing & Inspection
House # 34, Level # 5A, Road No. # 01, Sector # 12, Uttara, Dhaka – 1230
Phone: +88-0-447-5108855
E-mail: [email protected]
We know
All electrical installations deteriorate with age and use. They should
therefore be inspected and tested at regular intervals to check whether they are
in a satisfactory condition for continued use. Such safety checks are commonly
referred to as 'periodic inspection and testing'. Once completed you will be
issued with an Electrical Condition Report (EICR).
Periodic inspection will provide
Reveal if any of your electrical circuits or equipment are overloaded.
Find any potential electric shock risks and fire hazards.
Identify any defective electrical work.
Highlight any lack of earthing or bonding.
Tests are also carried out on wiring and fixed electrical equipment to check that
they are safe. A schedule of circuits is also provided, which is invaluable for a
Who should carry out the inspection?
Periodic inspection and testing should be carried out only by electrically accredited
persons. The authorized person must have to follow the rules complying local
A group of highly qualified and experienced engineer is ready to support you from
If anything found as a violation of BNBC standard regarding to safety of the
electrical system, Novelty Engineering Corporation will bring it to your concern.
Do you know the law?
To ensure the safety issues of an electrical
system, there are some certain rules and
regulations are followed:
 Insulation Test (BNBC - 2.11.2)
 Earth Resistance Test (BNBC – 2.11.3)
 Load Current Measurement/ Operating
Test (BNBC – 2.11.4)
 Substation Inspection (BNBC –
 Lighting Circuit Inspection (BNBC –
Meter Testing and Certification
According to the standards of
Bangladesh Bureau of Testing and
Consultancy (BRTC), NEC is providing
certification and testing service for various
electrical meters (Thermal gun, Voltmeter,
Ammeter, Megger, Insulation Tester, Earth
Tester etc.) operated in highly equipped
Electrical Drawing & Certification
Following the rules of Bangladesh
National Building Code (BNBC), NEC is
able to provide Single Line Diagram (SLD)
and Electrical as build drawing (electrical
layout) of your factory.
We also offers certification of your
electrical drawing by a certified engineers
of Institute of Engineers, Bangladesh (IEB).
What are we offering to you?
1. Panel Board Inspection
Panel board inspection is a basic requirement to
maintain the electrical safety. NEC performs periodical
inspection of control panel and distribution panel
following international procedure.
2. Insulation Measurement
To avoid short circuits or fire hazards, all the electrical
component should have proper insulation.
NEC offers proper measurements of all load cables and
power cables of a system. And measuring insulation
resistance of motors and machines are performed.
3. Load Current Measurement
NEC is able to carry out the measurement of your single
phase and three phase loads over a time period with a
standard monitoring profile.
4. Earth Resistance Measurement
NEC provides the measurements of earthing showing
the deviations with the standards and suggestions.
5. Thermal Observations
Thermo-graphic scan will detect all type of hot points
which can generate at several points like bus-bar,
breaker connection terminal, overloaded cable, splicing
joint etc.
NEC performs this thermo-graphic test and prepare one
report to detect the hot points.
Other Services
Electrical Safety
 Rectify all NC with manpower.
 Consultancy on system rectification.
 Supply & Installation of Lighting Arrestor.
 Check, verification & certification of Drawings by government accredited
Building Safety
 Detail structural drawing (RCC & Steel).
 Structural assessment report.
 Architectural drawing.
 Structural analysis.
 Mechanical, Electrical & Plumbing
 Material Test.
 Factory floor plan layout.
 Crack analysis.
 Certification.
 Machine layout drawing.
 Non-destructive test.
Fire Safety
 Fire safety related construction.
 Hydrant system: Design, Supply & Installation.
 Fire Equipment: Supply & Installation.
 Fire Certification (Service).
NEC is providing quality service to the leading organizations
of RMG & Industrial sector of Bangladesh.
 Hoplun (BD) Ltd.
 Orion Group
 Unilever Bangladesh Ltd.
 Univogue Garments Ltd.
 SQ Group
 Palmal Group
 Alif Group
 ZDD Industries Ltd.
 Panache Knitex Creations
 T-Design Sweaters Ltd.
 Arrow Jeans Ltd.
 JL Sweaters Ltd.
 LIZ Fashions Industries Ltd.
 Regency Garments Ltd.
 Unitex Group
 Premier 1888 Ltd.
 Crown Mills Ltd.
 Meinetti PVT. BD Ltd.
 Bornali Textiles Ltd.
 Designtex Group Ltd.
 Eusebio Sports (BD) Ltd.
 JL Fashions Ltd.