WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION PLL ALARM CLOCK RADIO Model : FRA212PLL INSTRUCTION MANUAL The lighting flash with arrowhead symbol, with an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance. WARNING The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus. It shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not place the product in closed bookcases or racks without proper ventilation. The batteries (Battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Excessive sound pressure from earphones and headphones can cause hearing loss. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 1 Speaker 11 AL1 radio indicator 2 SOURCE/AL OFF button 12 AL:2 buzzer indicator 3 AL1/+ button 13 AL2 radio indicator 4 AL2/− button 14 LED display 5 DIMMER button 15 DC jack 6 HOUR/ button 16 FM wire antenna 7 MIN/button 17 Battery compartment 8 CLK/MEM button 9 SNOOZE/SLEEP button 10 AL1 buzzer indicator CONNECTING THE UNIT TO POWER Before plug in the AC power cord to the AC wall outlet, please make sure that the voltage of your electricity supply is same as that indicated on the rating plate. BATTERY BACKUP Insert two pieces UM-4 batteries (not supplied) into the battery compartment. Be sure to observe the proper polarity (the "+" and "-" signs) as indicated inside the battery compartment. In case of power failure or interrupted AC power, the current time and alarm time settings, the stored radio stations are preserved in the memory of the unit by means of battery back-up function. SETTING THE CLOCK 1. With the unit in CLOCK mode, press and hold the CLK/MEM button for about 1 second, the time will begin to flash on the display. 2. Press the HOUR/ button to adjust the hour. 3. Press the MIN/ button to adjust the minute. 4. When the correct time is selected, press the CLK/MEM button again to confirm. SETTING THE ALARMS 1. With the unit in CLOCK mode, press the AL1/+ or AL2/−button. The ALARM time will begin to flash on the display. 2. Press the HOUR/ button to adjust the alarm hour. 3. Press the MIN/button to adjust the alarm minute. 4. When the desired alarm time is selected, press the AL1/+ or AL2/−button to confirm. 5. Press the AL1/+ or AL2/− button to select the ALARM sound mode - buzzer or currently set radio station. The alarm buzzer or radio indicator will light up. TURN OFF THE ALARM When the Alarm activate, press the SOURCE/AL.OFF button to turn off the Alarm. LISTENING TO THE AM/FM RADIO 1. Press the SOURCE/AL.OFF button to select AM or FM band 2. Press the HOUR/ or MIN/button step by step to tune to the desired radio stations. 3. Press and hold the HOUR/ or MIN/ button for approx. 1 second, it will start to search the next radio station in the direction of the search. The search operation simply finds stations with strong signals. Stations with weak reception can only be tuned in manually. 4. To turn off the radio, press and hold the SOURCE/AL.OFF button for approx.. 1 second. SAVING A RADIO STATION TO THE MEMORY 1. Tune the radio to the desired station. 2. Press and hold the CLK/MEM button to store this radio station in the next memory station number. The display will show PXX (XX is the memory station number from 01 to 10) 3. Up to 10 AM and 10 FM radio stations can be stored in the memory. 2. 3. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9 minutes by pressing the SNOOZE button once. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has ended. This procedure can be repeated for up to approximately one hour. Press the DIMMER button to select the brightness of the display SPECIFICATIONS Frequency Range: AM 522 - 1620 KHz FM 87.5 – 108 MHz Power Supply: AC 230V ~ 50 Hz AC/DC Adaptor DC6V 200mA Back-Up Battery: 2 pc. UM4 TO LISTEN TO A SAVED RADIO STATION 1. Press the SOURCE/AL.OFF button to select AM or FM band. 2. Press the CLK/MEM button to skip to the next stored radio station. SLEEP TO MUSIC FUNCTION 1. This function allows you to listen to the radio while you fall asleep. 2. Press the SNOOZE button, the display will show the default sleep time of 90 minutes. 3. Press the SNOOZE button repeatedly to set the desired sleep time. (90-80-70-60-50-40-30-20-10 min. or OFF) 4. After the pre-set time has elapsed, the radio will turn off automatically. SNOOZE FUNCTION 1. DIMMER CONTROL TURN OFF THE RADIO Press and hold the SOURCE/AL OFF button for approximate 1 second, the radio will turn off. Specifications are subject to change without prior notice.
© Copyright 2018 ExploreDoc